Author Topic: P07/09 with Cajun Springs and Hard Primers  (Read 4773 times)

0 Members and 1 Guest are viewing this topic.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3261
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #15 on: December 11, 2017, 01:58:12 PM »
Believe me - I buy the Fed Al also - but $160 shipped for a case of Wolf is hard to turn down. No tax.  Walmart also has $7.78/box Tula which I found to be pretty clean (silver bullet stuff).

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 397
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #16 on: December 12, 2017, 05:42:45 PM »
Yup $7.78 had me thinking. Might still try it. I got other guns I can put it through if my FP isn't long enough.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3261
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #17 on: December 12, 2017, 08:29:21 PM »
If I remember correctly, my cz compact with 17 LB spring is 100 percent with steel case.

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 397
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #18 on: December 13, 2017, 08:53:18 AM »
I'm at #15 no Extendo FP, my only concern. Never had one not go off so I may do it for fun. I know the gun will eat it no problem.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3261
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #19 on: December 13, 2017, 10:06:33 AM »
I'm at #15 no Extendo FP, my only concern. Never had one not go off so I may do it for fun. I know the gun will eat it no problem.
. Please let us know!  Thanks.

Offline Rick53

  • Full Member
  • ***
  • Posts: 237
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #20 on: December 13, 2017, 12:03:52 PM »
Which Firing Pin is in the 97098 Pro-Grade Upgrade Kit P-07 P-09   https://cajungunworks.com/product/p-07-p-09-pro-grade-package/

It doesn't say ?  I've been using 13 lb Hammer along with a  15 lb Gold recoil Spring Shooting Freedom HP FP Reloads 115 and 124 grain with not one issue. With the same Hammer and OEM recoil Spring my face takes a beating:) 

Offline s0nspark

  • Administrator
  • Hero Member
  • *****
  • Posts: 2043
  • System Admin
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #21 on: December 13, 2017, 01:19:32 PM »
Which Firing Pin is in the 97098 Pro-Grade Upgrade Kit P-07 P-09   https://cajungunworks.com/product/p-07-p-09-pro-grade-package/

It doesn't say ?  I've been using 13 lb Hammer along with a  15 lb Gold recoil Spring Shooting Freedom HP FP Reloads 115 and 124 grain with not one issue. With the same Hammer and OEM recoil Spring my face takes a beating:)

The extended FP with the matched FP spring and upgraded retaining pin...
"A man's character is his fate."

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 397
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #22 on: December 24, 2017, 12:26:04 PM »
I'm at #15 no Extendo FP, my only concern. Never had one not go off so I may do it for fun. I know the gun will eat it no problem.
. Please let us know!  Thanks.
IDK when I will get to the range, but I just bought that brown box Winchester USA. It looks awful lol.

USA Forged Steel $8.24 so $.16 a round
Federal Aluminum $8.97 so $.17 a round

We will see how it does, both from walmart, both VERY cheap. Also had brass for less than $10.00 a box. Hard to beat any of those prices.
Hopefully my stock FP can fire these off. If not they will be going right into my newer P10C.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3261
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #23 on: December 24, 2017, 05:42:26 PM »
Most of the time I see Tula at Walmart.  $7.74/50.  It?s likely better than win steel.  After tax still a tad over 16 c/rd.  Wolf shipped is cheapest.  Typically no problem, especially with CZ compact or Walther P99s stock.

Fed aluminum has been great.
« Last Edit: December 24, 2017, 05:44:39 PM by briang2ad »

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 397
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #24 on: March 19, 2018, 03:21:58 PM »
FINALLY was able to shoot that cheap Winchester Steel casing stuff.

Worked fine with my P09 with the comp HS and stock FP; but it also worked fine in the P10C and the SP01 Tact. I can get aluminum cheaper so I probably wont shoot it again, but I wouldn't hesitate to shoot it.

Offline FakeCZName

  • Full Member
  • ***
  • Posts: 462
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #25 on: March 19, 2018, 04:39:36 PM »
briang...: , I have the CGW extended FP with FP spring from CGW and CGW hammer and 15 lb hammer spring, short reset kit installed and CGW Extra-Strength Sear spring (which is necessary with this combination of upgrades).

My P-07 will function with any ammo I have ever tried in it and has done so for years now. I shoot it almost every week or so. Total 100% percent flawless function. It is the one gun I carry when I want to be sure I'm prepared for anything.

Offline miller_man

  • Jr. Member
  • **
  • Posts: 99
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #26 on: March 19, 2018, 07:28:31 PM »
I have about 600~ rounds of tulammo through my first p-09. It has the cgw extended firing pin and spring but stock main spring. Never had 1 hiccup. Have another 09 with probably another 150 -200 rounds of tulammo, stock main spring but just added cgw firing pin and spring, maybe 100 rounds of tula with that.

I love tula for cheap range fodder. I don't reload, so I order that stuff by the case. My experience with it has been MUCH better than the few cases of freedom I ran through a few years ago. I will say, getting serious about shooting for groups in the last few months -  I go to better, brass cased stuff for that (lawman or sellior bellot).
List of guns here?

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 397
Re: P07/09 with Cajun Springs and Hard Primers
« Reply #27 on: March 20, 2018, 10:37:56 PM »
Well I was going to eventually get the CGW Ext-FPS, but I don't see the point. Stocker even with such a light HS does the job just fine.