« previous next »
Pages: [1] 2   Go Down

Author Topic: Shadow 2 - Low Profile Slide Stop?  (Read 4795 times)

0 Members and 2 Guests are viewing this topic.

Offline dbarn

  • Sr. Member
  • ****
  • Posts: 573
Shadow 2 - Low Profile Slide Stop?
« on: March 23, 2018, 11:32:40 PM »
Now that CZ has the Shadow 2 and the slide stop is interchangeable with the P-01, will CZ come out with a more low profile (non-extended) slide stop?? At least with the SP-01 you can use the Rami and it works perfectly. It would be extremely nice to have this option. They supply an extended thumb safety but have the lower profile one installed. How about the same option with the slide stop??   
« Last Edit: March 24, 2018, 12:45:00 PM by dbarn »
Logged

Offline dbarn

  • Sr. Member
  • ****
  • Posts: 573
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #1 on: March 24, 2018, 12:46:42 PM »
Does anyone else have to modify their grip for the slide stop? It's the only issue I have with this pistol.
Logged

Offline Accuglock

  • Newbie
  • *
  • Posts: 4
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #2 on: May 27, 2018, 10:01:41 PM »
Sorry to bump an old thread, but I'm looking for this solution too.

Desperately need an ultra low profile option for these guns. 

Logged

Offline bigdave24

  • Full Member
  • ***
  • Posts: 406
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #3 on: May 30, 2018, 10:14:40 PM »
It?s pretty easy to grind a cz slide stop.
Logged

Offline 1SOW

  • Moderator
  • Hero Member
  • *****
  • Posts: 15006
  • GO GREEN - Recycle 9MM
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #4 on: May 31, 2018, 12:34:10 AM »
Quote from: bigdave24 on May 30, 2018, 10:14:40 PM
It?s pretty easy to grind a cz slide stop.

Would that be an "external modification" and not offered from the manufacturer?  re production class rules.
Logged

Offline andrew1220

  • Full Member
  • ***
  • Posts: 448
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #5 on: May 31, 2018, 07:20:11 AM »
Interesting. I never had any issues with the stock slide stop affecting my grip. I use the common thumbs forward grip and it's never interfered with my grip.
Logged

Offline dEX_RX

  • Jr. Member
  • **
  • Posts: 55
  • NXGen Tactical
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #6 on: May 31, 2018, 12:38:15 PM »
I ended up swapping the whole slide catch out for the Czechmate Slide Stop pin. Makes my offhand thumb joint at the palm MUCH more comfortable.

http://shop.cz-usa.com/ProductDetail/047000801604_Czechmate-Slide-Stop-Pin-No-Lever

Yes, I lost all slide lock capability but if I can control recoil better and more comfortably it?s worth it IMO.

Also shaved 7grams (0.25 oz) from the Carry Optics setup!
Logged
CZC Bull Shadow 2 - Bronze
CZ Shadow 2 - Black
Walther PPS M2

Offline rhart

  • Hero Member
  • *****
  • Posts: 1994
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #7 on: May 31, 2018, 02:01:23 PM »
Quote from: dbarn on March 24, 2018, 12:46:42 PM
Does anyone else have to modify their grip for the slide stop? It's the only issue I have with this pistol.

I had the same issue. I modified (internally) the Rami slide stop to work on the S2. Doesn't always lock back, but I like it. I've never had an RO ask to see my slide stop...
Logged
Musashi:
- In all forms of strategy, it is necessary to maintain the combat stance in everyday life and to make your everyday stance your combat stance. (situational awareness).
- You can only fight the way you practice.
- If you do not control the enemy, the enemy will control you.

Offline rhart

  • Hero Member
  • *****
  • Posts: 1994
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #8 on: May 31, 2018, 02:03:52 PM »
Quote from: dEX_RX on May 31, 2018, 12:38:15 PM
I ended up swapping the whole slide catch out for the Czechmate Slide Stop pin. Makes my offhand thumb joint at the palm MUCH more comfortable.

http://shop.cz-usa.com/ProductDetail/047000801604_Czechmate-Slide-Stop-Pin-No-Lever

Yes, I lost all slide lock capability but if I can control recoil better and more comfortably it?s worth it IMO.

Also shaved 7grams (0.25 oz) from the Carry Optics setup!

It irritated my thumb joint (where it attaches to the hand) as well. I considered the Czechmate solution, but went with a Rami slidestop instead (modified).
Logged
Musashi:
- In all forms of strategy, it is necessary to maintain the combat stance in everyday life and to make your everyday stance your combat stance. (situational awareness).
- You can only fight the way you practice.
- If you do not control the enemy, the enemy will control you.

Offline Accuglock

  • Newbie
  • *
  • Posts: 4
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #9 on: May 31, 2018, 09:14:59 PM »
I talked to Matt Hopkins who suggested I try the PCR slide stop. 

From pictures it's not as low profile as I would prefer, but I'll probably try one down the road.
Logged

Offline Accuglock

  • Newbie
  • *
  • Posts: 4
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #10 on: May 31, 2018, 09:16:35 PM »
Is the Czechmate pin a drop-in part to the Shadow 2, or require modification?

I might try that or grind a RAMI slide stop if it's a pretty straightforward job.
Logged

Offline rhart

  • Hero Member
  • *****
  • Posts: 1994
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #11 on: May 31, 2018, 09:43:39 PM »
Quote from: Accuglock on May 31, 2018, 09:14:59 PM
I talked to Matt Hopkins who suggested I try the PCR slide stop. 

From pictures it's not as low profile as I would prefer, but I'll probably try one down the road.

Not low profile enough - try modified Rami.
Logged
Musashi:
- In all forms of strategy, it is necessary to maintain the combat stance in everyday life and to make your everyday stance your combat stance. (situational awareness).
- You can only fight the way you practice.
- If you do not control the enemy, the enemy will control you.

Offline dEX_RX

  • Jr. Member
  • **
  • Posts: 55
  • NXGen Tactical
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #12 on: June 01, 2018, 12:29:59 PM »
Quote from: Accuglock on May 31, 2018, 09:16:35 PM
Is the Czechmate pin a drop-in part to the Shadow 2, or require modification?

I might try that or grind a RAMI slide stop if it's a pretty straightforward job.
Drops right in. Costs $9 direct from CZ. I picked up 3 while they were in stock. Perfect fit flush on the left side and normal position on the right.

Only thing is there?s a square hole in the frame after
Logged
CZC Bull Shadow 2 - Bronze
CZ Shadow 2 - Black
Walther PPS M2

Offline Boyshkin

  • Newbie
  • *
  • Posts: 18
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #13 on: March 11, 2019, 08:04:34 PM »
I also have the same problem. Guess I'll have to start reshaping. My thumb is getting pretty worn out.
Logged

Offline dbarn

  • Sr. Member
  • ****
  • Posts: 573
Re: Shadow 2 - Low Profile Slide Stop?
« Reply #14 on: March 11, 2019, 08:38:35 PM »
Quote from: Boyshkin on March 11, 2019, 08:04:34 PM
I also have the same problem. Guess I'll have to start reshaping. My thumb is getting pretty worn out.

Wow, my thread from a year ago and I still dislike the extended slide stop. Here's my recent post from a thread from below. For all of us that dislike this slide stop, how about contacting CZ-USA and tell them we want the new version over here:

There is a thread on another forum talking about the new upcoming Shadow 2 Orange and a European catalog showing a Rami style slide stop available for it over there.

If true, why is it not available over here?? Scroll down to the 10th post by zen-grasshopper

https://forums.brianenos.com/topic/269432-cz-shadow-2-orange/

Logged
Pages: [1] 2   Go Up
« previous next »