Author Topic: cz 82 magazines.  (Read 4609 times)

0 Members and 1 Guest are viewing this topic.

Offline daniel17319

  • Newbie
  • *
  • Posts: 19
cz 82 magazines.
« on: May 02, 2018, 04:26:04 AM »
looking fer good ones that work well.

Offline daniel17319

  • Newbie
  • *
  • Posts: 19
Re: cz 82 magazines.
« Reply #1 on: May 02, 2018, 10:19:19 AM »
bump

Offline eastman

  • Hero Member
  • *****
  • Posts: 2154
Re: cz 82 magazines.
« Reply #2 on: May 02, 2018, 10:09:59 PM »
buy factory new magazines direct from the CZ-USA webstore. They aren't cheap, but they work 100% right.
I don't look like my avatar!

Offline daniel17319

  • Newbie
  • *
  • Posts: 19
Re: cz 82 magazines.
« Reply #3 on: May 03, 2018, 10:26:28 AM »
CZ doesn't have them anymore who else do I ask who do I know im getting factory magazines? I was told to look at cz custom or cajun gun works anyone can confirm or deny. Or what about Numrich?
« Last Edit: May 03, 2018, 10:30:43 AM by daniel17319 »

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1017
  • Coat of Arms for Uherský Brod
Re: cz 82 magazines.
« Reply #4 on: May 03, 2018, 01:26:28 PM »
CZ24,CZ27,CZ38,CZ40P,CZ45,CZ52,Vzor 50,Vzor 70,CZ75BΩ,CZ75D PCR,CZ75 P01,CZ75 P07,SP-01 Phantom,SP01 Tactical,CZ Shadow 2,CZ P09, P10C, CZ82, CZ83, CZ85 PreB, CZ100, CZ 97BE, CZ100, CZ 1911A1, CZ 2075BD RAMI, CZ 452 American, CZ 550 Urban Counter Sniper, CZ 805 Bren,CZ Drake G2, Duo & Z

Offline daniel17319

  • Newbie
  • *
  • Posts: 19
Re: cz 82 magazines.
« Reply #5 on: May 03, 2018, 01:46:45 PM »
Do you know how to tell if they are factory or not, I talked to CZ they told me specifically what it is, there are alot of fakes.

Offline Oldwolf

  • Full Member
  • ***
  • Posts: 265
Re: cz 82 magazines.
« Reply #6 on: May 03, 2018, 04:20:52 PM »
Greg Coate has them last I looked.
http://gregcotellc.com/cart/
SP-01 Shadow Target Custom
75 SA
83

Offline Ross7

  • Hero Member
  • *****
  • Posts: 1520
Re: cz 82 magazines.
« Reply #7 on: May 03, 2018, 07:37:32 PM »
Appear to be on sale here for $24.95...

https://www.gunpartscorp.com/products/1188090

« Last Edit: May 03, 2018, 07:40:47 PM by Ross7 »

Offline Oldwolf

  • Full Member
  • ***
  • Posts: 265
Re: cz 82 magazines.
« Reply #8 on: May 04, 2018, 06:53:34 AM »
There should be no weld seam on original CZ magazines.

Sent from my SM-G900V using Tapatalk

SP-01 Shadow Target Custom
75 SA
83

Offline il.bill

  • Sr. Member
  • ****
  • Posts: 504
Re: cz 82 magazines.
« Reply #9 on: May 10, 2018, 08:30:57 AM »
In stock:  https://www.classicfirearms.com/cz-82-83-original-factory-magazine

I doubt those are the 'Real Deal'.  At that price they are most likely the bogus 'Mfg. CZ' marked magazines.  Genuine new CZ-USA Factory Magazines for the CZ82/83 IN 9x18mm/.380ACP cost right around $40.

Offline il.bill

  • Sr. Member
  • ****
  • Posts: 504
Re: cz 82 magazines.
« Reply #10 on: May 10, 2018, 08:34:24 AM »
Greg Coate has them last I looked.
http://gregcotellc.com/cart/

These from Greg Cote, LLC are most likely genuine.  I have dealt with him before and they were the 'Real Deal'.

Offline daniel17319

  • Newbie
  • *
  • Posts: 19
Re: cz 82 magazines.
« Reply #11 on: May 10, 2018, 08:58:53 PM »
I ordered some fellas idk if they are the real deal I guess ill find out.

Offline boatnut

  • Jr. Member
  • **
  • Posts: 99
Re: cz 82 magazines.
« Reply #12 on: July 21, 2018, 06:35:42 PM »
Daniel,
how'd those mags work  out?

Offline Coach Ed

  • Newbie
  • *
  • Posts: 5
Re: cz 82 magazines.
« Reply #13 on: August 12, 2018, 09:32:29 PM »
I cannot find factory replacement magazines for my CZ 83. I do however have one, I am pretty sure is a factory mag. That magazine works flawlessly and does not have a visible seam. The brand new faulty magazines have a  welded seam that has been ground opposite the round indicator holes. I disassembled both magazines and compared each part. These were my observations that were possibly causing FTF’s (failure to feed):

The plastic follower has a hole in it to allow it to connect it to the spring. The the factory drilled the wrong position of the hole causing the spring to protrude outside of the follower body making it scrape the interior of the magazine as it travel up as rounds are spent causing drag. The square hole that was punched for the magazine lock has caused the metal to slightly protrude into the wall of the magazine. You can feel this with your finger. You cannot feel this in the factory magazine. As the spring scrapes it’s way along the magazine wall as rounds are fed, it gets hung up on the protruding metal around the magazine stop (square)  hole. This causes the FTF.
Solution: take the follower and while using a dremel carefully enlarge the hole for the spring in an egg shape allowing the spring to ride next to the follower and away from the magazine wall. Using a bastard file, file the protruding metal inside the magazine at the square hole so the follower can travel smoothly.

After doing this to 3 magazines they are working fine. Although I had to file one a couple more times. Hope it works for you if you are having these issues.

Offline herd118

  • Newbie
  • *
  • Posts: 2
Re: cz 82 magazines.
« Reply #14 on: September 04, 2018, 01:28:34 PM »
I cannot find factory replacement magazines for my CZ 83.

Apex has surplus mags in stock for $24.95. Best deal around for the real thing. Ordered 2, received Czech military surplus marked mags, not the current fakes floating around.
https://www.apexgunparts.com/handguns/czech/czech-cz82-12rd-magazine-9mm-makarov.html