-
Hello,
I think we need a consolidated place were we can post pictures of, probably one of the sexiest 9mm ever designed. A lot of other firearms forums have dedicated picture threads.
So please post your beauty.
Here is a shot of mine. Her name is Sandra. I'll post a few more when I get a chance to get her in her new digs.
(https://lh4.googleusercontent.com/-mQel1MmhAUQ/UoLKdrf_LfI/AAAAAAAADwE/MnbfJikJb8k/w1298-h865-no/_MG_8306_edited-2.jpg)
-
Very nice. Is that the matte version?
-
Wow...thanks for posting! Those are the exact grips I'm looking to put on mine-- VZ desert sand. Waiting to get back in stock. I ordered a set of cocobolos's also to see how I like them. Looking for something a bit smaller then the rubber grips that came on my polished SS.
How do you like your grips?
I'll post pics after I get "her dressed up".
-
Very nice. Is that the matte version?
She is the matt version. I did polish her up, I will put post some new pictures this evening.
-Jason
-
Here she is all shined up and ready for a night on the town. O0
(http://jsunn.zenfolio.com/img/s11/v34/p987193913-4.jpg)
-
They sure look pretty dressed-up in wood, but I only shoot in rubber
Here's my Duo Tone Semi-Compact
It was a Matte Stainless frame before I polished and Scotchbrite buffed it
(https://i.imgur.com/OgTFnzo.jpg)
(https://i.imgur.com/728iUA7.jpg)
-
This was one of my competition guns a couple of years ago
(http://img.photobucket.com/albums/v483/eerw/My%20stuff/IMG_0105.jpg)
-
Here is my Polished SS sporting Crimson Trace grips and a "weak hand pinkie rest" base plate.
(http://i944.photobucket.com/albums/ad289/AlveyJoe/DSCF0074.jpg)
(http://i944.photobucket.com/albums/ad289/AlveyJoe/DSCF0073.jpg)
Joe
-
Here is my Polished SS sporting Crimson Trace grips and a "weak hand pinkie rest" base plate.
(http://i944.photobucket.com/albums/ad289/AlveyJoe/DSCF0074.jpg)
Joe
Where did you get the magazine base and how did you fit the Crimson trace grips with the amib-safety??!! :o :o
-
JSunn...you just asked the magic question and asked the right forum member.
-
Jsunn:
What Stuart is saying (without saying it) is....
The man that posted the pictures machined the parts in question.....
75Plus...aka Joe....The Mad Machinist
We need a picture gallery of some of Joe's parts.....They are just TOO COOL
-
Where did you get the magazine base and how did you fit the Crimson trace grips with the amib-safety??!! :o :o
You can find info on the base plates here:
http://www.czfirearms.us/index.php?topic=25806.0
And info on the adapter for C-T grips here:
http://www.czfirearms.us/index.php?topic=41298.msg231373#msg231373
The base plate shown in the picture is not SS. It is an aluminum prototype that I made up. While it can be made in SS it adds quire a bit of weight to the weapon.
Joe
-
Here is my polished SS with new cocobolo grips and new mag base. Thanks 75+! 8)
(http://www.ppdbillet.com/69%20Mach%201/funpics/CZ-75B-7.jpg)
-
Vern:
That is one sexy beast
-
Vern:
That is one sexy beast
Thank You Den. I wasn't quite finished yet, but just completed my 4 mag custom engraved plates. I came up with a 4 dot marking system that can identify each mag number or even be color coded for different ammo types. These are engraved (finished myself in the machine shop today) then engraved dots filled with paint. Spent quite some time finishing, but now own one of a kind pistol. :)
(http://www.ppdbillet.com/69%20Mach%201/funpics/CZ-75B-Custom-engrave.jpg)
-
Now..those are sweet!
-
Vern:
That is one sexy beast
Thank You Den. I wasn't quite finished yet, but just completed my 4 mag custom engraved plates. I came up with a 4 dot marking system that can identify each mag number or even be color coded for different ammo types. These are engraved (finished myself in the machine shop today) then engraved dots filled with paint. Spent quite some time finishing, but now own one of a kind pistol. :)
(http://www.ppdbillet.com/69%20Mach%201/funpics/CZ-75B-Custom-engrave.jpg)
now that is the work of a perfectionist. well done !
-
Vern:
Your dot/numbering system is a very cool concept
Besides helping to track a given load?.
(if a feed problem rears its ugly head) you can track and isolate/eliminate a given magazine
You guys and your fancy tools/machines?.Which one?s named Jones?..So I know who to keep-up with ? ? ?
I?m going to have to teach my Demmel a new trick or two
-
Every option available
(http://oi42.tinypic.com/sl41i0.jpg)
(http://oi39.tinypic.com/fynwpj.jpg)
-
And here she is with the new base plates from 75plus
(http://jsunn.zenfolio.com/img/s11/v36/p785533631-5.jpg)
-
She?s gorgeous man
Joe does incredible work
-
you guys make me think about makin my matte a polished!
-
Gman:
I had the Matte Stainless frame on my Semi-Compact
I hated that every little thing the ?brushed? against it, buffed the matte, leaving a blemish in the finish?.It really bothered me
SO, I polished it out?.LOOKED SHARP
BUT, I still wanted that matte look
So I took a Green ScotchBrit pad to it and gave it the ?Brushed? look
I wish it was a bit more matte, but I think it still looks VERY SHARP
I really dig that B-SA style frame too
Shoot safe, Den S
-
They sure look pretty dressed-up in wood, but I only shoot in rubber
Here's my Duo Tone Semi-Compact
It was a Matte Stainless frame before I polished and Scotchbrite buffed it
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZ75BSemi-CompactDouTone-2.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZ75BSemi-CompactDouTone-1.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZ75BSemi-CompactDouTone.jpg)
...really REALLY like the look of that.!! Awesome pics
-
Here's mine. ... probably seen it in other threads... had some minor mods to it..all reversible.
http://i704.photobucket.com/albums/ww48/joecachia/My%20Guns/IMG_0366copy.jpg
http://i704.photobucket.com/albums/ww48/joecachia/My%20Guns/IMG_0367copy.jpg
-
Very nice
I'd like to try that flat SA trigger
My B-SA has the stock metal trigger
The DT Semi has the CZCustom Recurved Trigger
-
My IPSC production gun. Thanks to Vinnie for fixing the picture up.
(http://app4.websitetonight.com/projects2/7/1/4/7/1847417/uploads/stainless_Limited_Edition_IPSC_Production_jammy.jpg)
-
Thanks Den,
To be honest I preferred the SA only trigger that had a slight curve at the bottom but it was not in stock. I think the flat trigger does not complement well with the traditional looks of the CZ but I am still happy with it. If I knew what a chore it was to replace it I would have kept it in :o DA/SA lol .
P.S. Nice gun Admiral ( I pasted the link in the browser and the pic came up ) . By any chance do you live in AUstralia ? the barrell is not of standard length it seems.
-
Thanks, and you are correct sir. Minimum barrel length is 120mm here. Looks good IMO.
-
AA:
Looks too cool
How do the Molly TC rounds run ?
I ran a few Linotype TC and RN rounds, but the rifling was pealing too much material, leaving some good ribbons in the bore
I shoot nothing but jacketed or plated bullets now
-
Cheers Den.
The Mollys shot great, didn't seem to leave any in the barrel, however I haven't shot them in great quantities. I now shoot the same 125 TC projies, but plated.
P.S. Expect an updated pic soon, as I am converting her from Prod. to Standard. Have just ordered comp hammer and SAO trigger with pre and post adjustment, short al grips and magwell, and bumpers for my mags. Can't wait! Eventually will get M&P for my production gun (don't ask me why, I just feel the urge to own a plastic gun, and can't bring myself to buy a glock).
-
(http://jsunn.zenfolio.com/img/s11/v34/p735599836-4.jpg)
[/quote]
Very nice. How do you like the VZ grips, and do you have any opinion how they compare to some of the CZ Custom aluminum grips? Also, where did you get the nice grip screws? Thanks for sharing.
MC in rural SC
-
(http://jsunn.zenfolio.com/img/s11/v34/p735599836-4.jpg)
Thanks for the compliment. I do really like the VZ grips. They have great grip. I got the screws from CZ custom shop.
-Jason
-
My first post on this forum. Just joined as a matter of fact.
There are some fantastic looking stainless 75Bs in this photo thread. The add-ons and upgrades are really impressive! There's a lot of talent among this group!!!
Here's my totally bone-stock 75B Matte Stainless...
(http://i4.photobucket.com/albums/y141/nitesite9/CZ-75B.jpg)
-
Welcome to the Forum Nitesite
Nice choice for your first post....Sweet piece
I think the Matte Satinless is one of the best looking CZs available
-
the pictures here have got me in two minds, whether to get the compact first (which I had decided) or the stainless first! Can only be one for the next few months. bleep these CZs..
-
Just start with the compact, then before you know it, you will have 8 or 10. ::) ::) ::) ::) ::) ::)
-
Here's my Stainless USPSA (I alternate between this and the Shadow Custom).
CZ Custom hammer, Old Style 85 trigger, CZ Custom Tactical rear sight, VZ grips, stainless guide rod, stainless mag break, Cajun trigger return spring and a lot of internal polishing.
(http://i468.photobucket.com/albums/rr50/huskerlrrp/SIG/cz-004.jpg)
-
Boy, that sure is gorgeous Huskerirrp
-
Just start with the compact, then before you know it, you will have 8 or 10.
No doubt, specially after all these stunning pictures, latest by huskerlrrp!
-
Just start with the compact, then before you know it, you will have 8 or 10.
No doubt, specially after all these stunning pictures, latest by huskerlrrp!
Thanks, I haven't been able to teach it to clean itself though :P
-
.....I haven't been able to teach it to clean itself though :P
That was one thing I REALLY liked about the Academy
We checked out our weapon from the Armory in the afternoon and returned it in the evening
And the Armorer took care of ALL the cleaning
THAT WAS GREAT !
-
Just start with the compact, then before you know it, you will have 8 or 10. ::) ::) ::) ::) ::) ::)
If I had only been warned... that a CZ will multiply LIKE RABBITS! It started innocently enough with a CZ-75 Stainless Steel Limited Edition. I purchased the "Adapter for Crimson Trace Grips" created by this forum's very own member, 75PLUS. It worked GREAT! See this post for ordering info from 75PLUS: http://www.czfirearms.us/index.php?topic=32775.msg236981#msg236981 (http://www.czfirearms.us/index.php?topic=32775.msg236981#msg236981) ...or... search for "Adapter for Crimson Trace Grips". But... then I got bored, and found myself rarely using the Crimson Trace grips on the range.
Sooo... I changed the grips on the CZ-75 SS Limited Edition to Xtreme Aluminum Grips:
(http://img403.imageshack.us/img403/2203/1cz75sslimitededitionlei.jpg) (http://imageshack.us/g/403/1cz75sslimitededitionlei.jpg/)
Click image for additional pics
...this left me with an unused and PERFECTLY GOOD set of Crimson Trace LG-475 grips. That's a PROBLEM.
No worries. As lotsagas4u stated, a CZ multiplies like rabbits! I stumbled upon this at my local CZ dealer, and bought it after an entire day of "pre-purchase pondering":
The engraved "U.S. only", CZ-75 75th Anniversary. (75 created/imported to the U.S.):
(http://img696.imageshack.us/img696/869/5cz7575thanniversaryusa.jpg) (http://imageshack.us/g/403/1cz75sslimitededitionlei.jpg/)
Click image for additional pics
The 75th Anniversary has no RH Safety. So, I can safely put away those hallmarked silver Eagle handgrips, and use the "leftover" Crimson Trace Grips. Yeah, yeah, yeah. It's a barbecue pistol. But, it's still a CZ-75! BTW... I've heard some folks suggest in the forums that it's polished stainless steel; however, Jakub at CZUB confirmed that it's "Polished Nickel" before I purchased it.
Whew. Damage done. Should be okay for a little while. Then... HOLY C##P!!! Uh... I had to get this. It was too unbelievable to find (and new in box):
CZ-75 SP-01 Shadow Adam Tyc World Champion Edition (333 created. I've read online that only "6 were imported to the U.S.")
(http://img210.imageshack.us/img210/3117/11cz75sp01shadowworldch.jpg) (http://imageshack.us/g/403/1cz75sslimitededitionlei.jpg/)
Click image for additional pics
Okay. I've satisfied my CZ "fix" for at least one year... uh... six months.
MORAL: Start with a CZ. A compact....or a stainless 75B... or an SP-01. Don't worry... you'll be back to pick up your other "kids" soon enough! (Next up... a Tac Sport in 9mm! Oh yeah!)
-EZX12 (Newbie CZ junkie. Working on a trip to the dog house).
-
Jeez Louise
Are those things B E A U T I F U L or what ? ! ?
-
Holy smokes...keep it up and you'll have a barbecue gun for every day of the week. Nice irons though.
-
Matte CZ 75B:
(http://img72.imageshack.us/img72/4215/20120212101812974.jpg)
-
Breat pic.s all...i think the stainless CZ's are just awesome looking! I have a Matte with extended beaver tail. Back around 1995 when i bought my first CZ nobody even LGS's around here had no idea what a CZ was...the secret is long out now day's...excellent firearm's!!
-
Here's mine:
SA tricker system
Competition hammer
Alu grips
Alu mag. funnel
Alu mag. base
LPA adjustable rear sight with green optic fibre and at the front a red fibre optic.
Hammer and barrel are titan/nitride coated, gold colour.
(http://i1039.photobucket.com/albums/a480/Florijn48/DSCN4639.jpg)
(http://i1039.photobucket.com/albums/a480/Florijn48/DSCN4640.jpg)
(http://i1039.photobucket.com/albums/a480/Florijn48/DSCN4641.jpg)
(http://i1039.photobucket.com/albums/a480/Florijn48/DSCN4643.jpg)
(http://i1039.photobucket.com/albums/a480/Florijn48/DSCN4645.jpg)
-
Very cool
I dig the TN Coated parts
-
^I agree, very nice! Have you considered giving the trigger, safety and slide stop the same treatment? I think it would complete the look.
-
^I agree, very nice! Have you considered giving the trigger, safety and slide stop the same treatment? I think it would complete the look.
Yes, I concidered, but I guess it would be over done.
I don't want to "copy" the SP01 special/limited.
The plan was to do only the barrel. But the comp. hammer came in black, I didnt want it to be black but stainless. So I had a choice, the stainless look coating, or the gold look coating. The gold look makes it more to the top I guess.
I have to replace the grip screws for stainles, and the security screw in the funnel too.
Thanks !!
-
^I agree, very nice! Have you considered giving the trigger, safety and slide stop the same treatment? I think it would complete the look.
Yes, I concidered, but I guess it would be over done.
I don't want to "copy" the SP01 special/limited.
The plan was to do only the barrel. But the comp. hammer came in black, I didnt want it to be black but stainless. So I had a choice, the stainless look coating, or the gold look coating. The gold look makes it more to the top I guess.
I have to replace the grip screws for stainles, and the security screw in the funnel too.
Thanks !!
Where did you have those done (if I might ask)? I've wanted to coat an IPSC Standard barrel.
-
Raynbow6, very nice pistol you have there, where did you find those grips? I have some black ones like that on my P01. CZ custom said there was none for the large frame 75/kadet. thanks
-
Raynbow6, very nice pistol you have there, where did you find those grips? I have some black ones like that on my P01. CZ custom said there was none for the large frame 75/kadet. thanks
Thanks !
The grips come from CZ, webshop. Available in black, red, blue, alu. They are available in long and short version. The short for if you have a mag. funnel. The oter parts like mag. funnel, mag. base are also available in mentioned colours.
-
Where did you have those done (if I might ask)? I've wanted to coat an IPSC Standard barrel.
A local gunsmit has connection with a company that is doing coat jobs like this for several companies.
-
http://www.shop-cz.com/grips-for-cz-75-sp01-sh-long-wide-checkered-black/d-70770/
Looks like they are out of black and silver. Are these the correct ones for Kadet and CZ75's? Thanks
-
Hello,
Here is a shot of mine. Her name is Sandra. I'll post a few more when I get a chance to get her in her new digs.
(http://jsunn.zenfolio.com/img/s11/v34/p735599836-4.jpg)
LOL, of course she's sexy. Not just because my beautiful wife's named Sandra either. :o
I love the new grips in the image down the thread. Sorry, I didn't mean to drool all over your gun. O0
-
http://www.shop-cz.com/grips-for-cz-75-sp01-sh-long-wide-checkered-black/d-70770/
Looks like they are out of black and silver. Are these the correct ones for Kadet and CZ75's? Thanks
Yes it looks that way. Send them en email, or check this: http://www.hoguestore.com/index.php?main_page=index&cPath=116_125_553 (http://www.hoguestore.com/index.php?main_page=index&cPath=116_125_553) (three pages)
Those are cool too, but no CZ logo.
-
Here is mine....
CZUB thick aluminum grips
CZUB rubber basepad(s)
CZcustom competition hammer
CZcustom tactical rear sight
Dawson .215 front sight
CZcustom solid trigger pin
CZcustom solid firing pin retaining pin
CZcustom solid stainless magbrake
CZcustom 15lbs hammer spring
And.....a trigger from a stripped 'old' 75B, since I don't like the shape of the standard trigger
(http://i1152.photobucket.com/albums/p491/odepetho/Gun%20Pics/CZS.jpg)
-
Mr. Odepetho...that looks bad ass, I see the additions. I really like the color contrast between the stainless and red grips. Where do you get those? and do they come in blue? I had been contemplating getting some wooden grips for my stainless, but now I may go with those aluminum ones. **edit, I found them, yes they come in blue, but they are out of stock. Bummer.**
-
Here's mine:
SA tricker system
Competition hammer
Alu grips
Alu mag. funnel
Alu mag. base
LPA adjustable rear sight with green optic fibre and at the front a red fibre optic.
Hammer and barrel are titan/nitride coated, gold colour.
I love it! C'mon now Raynbow6... please tell us:
- Where did you got the CZUB engraved and checkered grips... in a plain silver aluminum finish? The CZUB aluminum grips available on the CZ-USA website are anodized a color (blue, red, and black). Did you have yours re-finished... or the color stripped? I should have read further. You mentioned the "CZ webshop". Can I guess that you meant the European "CZ webshop" here?: http://www.shop-cz.com (http://www.shop-cz.com)
What a shame. No plain aluminum here at CZ-USA: http://shop.cz-usa.com/C-7/CZ-PRODUCTS.aspx (http://shop.cz-usa.com/C-7/CZ-PRODUCTS.aspx)
- Who did your Titanium Nitride coating?
You mentioned "a local gunsmith". Is that in Europe or state-side? I've wanted to get some parts finished in Titanium Nitride as well. I live in an area that has several TiN finishing services just a few miles away. I've asked about getting some small parts coated in Titanium Nitride (safety, slide stop, trigger, hammer, magazine release, etc). I wasn't interested in getting the barrel done, and since the parts are small, I figured they might do them while working on a larger job. Unfortunately, none of them are interested in touching firearm parts (even if provided disassembled). (Only one person mentioned a lower temp required for application to pistol parts?).
- What model LPA sight? and where did you get it? I've seen others that got an LPA sight that "hangs" back so far that the hammer needs to be notched (or a competition hammer like yours needs to be installed). Your rear sight looks "even" with the back of the slide, and it almost looks like a standard hammer would still be functional.
- Is that a straight SA Trigger from CZ Custom that you simply stripped to the plain aluminum finish?
- Where did you get the extended mag base in a plain aluminum finish? The mag well looks like one from CZ Custom, here: http://czcustom.com/CZ_mag_wells.aspx (http://czcustom.com/CZ_mag_wells.aspx) ...but I don't see the extended mag base in plain aluminum.
GREAT work!!!
-
I love it! C'mon now Raynbow6... please tell us:
- Where did you got the CZUB engraved and checkered grips... in a plain silver aluminum finish? The CZUB aluminum grips available on the CZ-USA website are anodized a color (blue, red, and black). Did you have yours re-finished... or the color stripped? I should have read further. You mentioned the "CZ webshop". Can I guess that you meant the European "CZ webshop" here?: http://www.shop-cz.com (http://www.shop-cz.com)
What a shame. No plain aluminum here at CZ-USA: http://shop.cz-usa.com/C-7/CZ-PRODUCTS.aspx (http://shop.cz-usa.com/C-7/CZ-PRODUCTS.aspx)
- Who did your Titanium Nitride coating?
You mentioned "a local gunsmith". Is that in Europe or state-side? I've wanted to get some parts finished in Titanium Nitride as well. I live in an area that has several TiN finishing services just a few miles away. I've asked about getting some small parts coated in Titanium Nitride (safety, slide stop, trigger, hammer, magazine release, etc). I wasn't interested in getting the barrel done, and since the parts are small, I figured they might do them while working on a larger job. Unfortunately, none of them are interested in touching firearm parts (even if provided disassembled). (Only one person mentioned a lower temp required for application to pistol parts?).
- What model LPA sight? and where did you get it? I've seen others that got an LPA sight that "hangs" back so far that the hammer needs to be notched (or a competition hammer like yours needs to be installed). Your rear sight looks "even" with the back of the slide, and it almost looks like a standard hammer would still be functional.
- Is that a straight SA Trigger from CZ Custom that you simply stripped to the plain aluminum finish?
- Where did you get the extended mag base in a plain aluminum finish? The mag well looks like one from CZ Custom, here: http://czcustom.com/CZ_mag_wells.aspx (http://czcustom.com/CZ_mag_wells.aspx) ...but I don't see the extended mag base in plain aluminum.
GREAT work!!!
Thanks for that !!
Please check: http://www.shop-cz.com/pistol-grips/c-1174/ (http://www.shop-cz.com/pistol-grips/c-1174/) for a lot of grips.
Or choose the Hogue ones: http://www.hoguestore.com/index.php?main_page=index&cPath=116_125_553 (http://www.hoguestore.com/index.php?main_page=index&cPath=116_125_553)
Those are without CZ logo.
The SA trigger coms from CZ custom, same as the mag well and the base plates.
The LPA sight comes just from the shelf, at a local gun store. Its Italian I think: http://www.lpasights.com/indexeng.asp (http://www.lpasights.com/indexeng.asp) It fits perfectly, but I think it is rather high.
The coating, yes, I think its art :)
I done it locally in Europe, just a company same as you mention. All parts were first polished. The hammer was sand blasted as the comp. hammer came in black only.
Yes, correct, new technics for coating, makes it possible to do this on very low temperature. Otherwise the parts will be deformed. You don't want this to happen with your barrel 8)
I have to replace the grip screws for stainless ones.
Ray
-
I have to replace the grip screws for stainless ones.
The screws are M3.5 countersunk and I just can't seem to find them :-(
-
The screws are M3.5 countersunk and I just can't seem to find them :-(
You can find them at CZ custom: http://czcustom.com/CZ-Grip-Screw-Hex-410-Stainless.aspx (http://czcustom.com/CZ-Grip-Screw-Hex-410-Stainless.aspx)
-
Got this New edition (limited edition?) the other day, after alternating between the two-tone compact and the SS New edition for a while..it just looked and felt much better than both the compact as well as the matte SS.
(http://i938.photobucket.com/albums/ad221/Gilani_pics/Review%20Pics%203/IMG_0733a.jpg)
The box says new edition, there are no markings as such on the gun. It has got tritium sights.
Below with a couple of TS, the aluminum grip TS also belongs to me as well..
(http://i938.photobucket.com/albums/ad221/Gilani_pics/Review%20Pics%203/IMG_0726a.jpg)
-
You can find them at CZ custom: http://czcustom.com/CZ-Grip-Screw-Hex-410-Stainless.aspx (http://czcustom.com/CZ-Grip-Screw-Hex-410-Stainless.aspx)
Those are not countersunk, I already have them.....
-
Got this New edition (limited edition?) the other day, after alternating between the two-tone compact and the SS New edition for a while..it just looked and felt much better than both the compact as well as the matte SS.
(http://i938.photobucket.com/albums/ad221/Gilani_pics/Review%20Pics%203/IMG_0733a.jpg)
The box says new edition, there are no markings as such on the gun. It has got tritium sights.
That baby is SO SWEET ! ! !
I really dig the Polished / Matte look
The Polished flats with the Matte contours and Controls....that is just too cool
AND, I think I like it better without the ?LIMITED? Roll Mark
Makes it look like it?s more of a custom Pistol that way
Very VERY NICE
-
@DenStinnet
Thanks. I am thinking to keep it as a collectors item! (but will shoot 200 odd rounds first perhaps)
-
@DenStinnet
Thanks. I am thinking to keep it as a collectors item! (but will shoot 200 odd rounds first perhaps)
All I can say is; "Den S Likes !"
-
I just received my first CZ. A carbon copy of coolbox's. I didn't know it was a 'New Edition' but happy it is! Now I just need to get to the range for a test run...
(http://i703.photobucket.com/albums/ww39/garonimus/Firearms/SAM_0351.jpg)
(http://i703.photobucket.com/albums/ww39/garonimus/Firearms/SAM_0358.jpg)
(http://i703.photobucket.com/albums/ww39/garonimus/Firearms/SAM_0357.jpg)
-
I just received my first CZ. A carbon copy of coolbox's. I didn't know it was a 'New Edition' but happy it is! Now I just need to get to the range for a test run...
Congratulations. Let us know how it goes.
-
SWEET ! ! !
Enjoy your new toy
-
I'm no photographer... but this my favorite BBQ gun "Big Pimp'n"
(http://)
Darn it :o
I've tried looking a few times now and the picture still comes up X'ed out >:(
There's no ling on the post ???
-
My FAVORITE auto BBQ-GUN is a CZ75 with pearl grips
(http://s19.postimage.org/e8y78z83n/IMG_0270.jpg)
-
Now you all have made me order one :) Just ordered a matt stainless!!!!!
-
There you go KH
VERY VERY NICE
Now all you need is one of Joe's Stainless Base Plates to top her off with
-
I just sent him an email... I hope he is still doing that kind of work. I had to pick my bottom jaw off the floor when I seen his work... :o
-
I just sent him an email... I hope he is still doing that kind of work. I had to pick my bottom jaw off the floor when I seen his work... :o
You bet
Joe's work is incredible, just by themselves
But then you add-in Vern?s engraving to them too
OMG, they are then a true work of art
Hope you get them real soon
-
Well, I'm new to the CZ family, but I'll share a pic of my first CZ after a range session. Now just need to get some of the full checked cocobolo grips... Do they come with the logo engraved? Doesn't show it on the website for the full checked, only the half checked.
New Matte Stainless 75B
(http://i1078.photobucket.com/albums/w485/peterthefish/IMG_6697.jpg)
-
I had these grips laying around for years. Didn't like the look of them on my normal CZ 75B polycoat. Moseyed into LGS yesterday, and moseyed right out with this! ;D "Born on" date was March 9, 2012 according to the test target. Can't wait to go shoot!
(http://[url=http://www.flickr.com/photos/32785899@N02]http://www.flickr.com/photos/32785899@N02[/url])
-
Pete:
Sweet piece there sir
Dragon:
You bet....
The wood Grips lokk GREAT on the Stainless
-
I'm going to have to take a photography course!!! There are some dang good looking photos posted? Well owning a CZ Stainless can bring out the artistic nature ~ I know I just did not say that? :o I'm going to the range first thing in the morning and get this artistic thing out of my system! ;D
-
No photography class needed... I think I got it 8)
(http://s19.postimage.org/w6ktbrrk3/King_Harold_CZ_75_B_Gloss_Stainless.jpg)
-
Holly Cats
Stainless BLING bonanza
To say HIGH Polished just don't cut it
-
WOWOWEEWOW!!!! That's beautiful.
-
Wow Harold! Love the pearl! Did you get those from Eagle Grips, or where?
-
DragonDog ~ thanks for the thumbs up on the grips... Pictures do not do them justice. The grips are from Houge... honestly I bought them on a whim, I have several others that cost much more, but the pearl seems to fit the look I was trying to get. I have a CZ 75 SA that sees all the range action. Again ~ thanks!
-
Picked it up a couple of hours ago. Hope to shoot it this week.(http://i1258.photobucket.com/albums/ii530/jdorn58/014.jpg)
-
SWEET ! ! !
-
Your going to fall in LOVE...
-
Motorcyclist, There seems to be something missing on the bottom. Look here and scroll down.
http://www.czfirearms.us/index.php?topic=25806.15
Joe
-
Oh wow! Thanks 75Plus but my wallet hates you.
-
Oh wow! Thanks 75Plus but my wallet hates you.
You gotta save up your pennies
Even if it's for just one for pics and showing off at BBQs
-
(http://i622.photobucket.com/albums/tt309/burley_bucket/IMG_0073.jpg)
In the pink.
-
Huh, odd how that pink does go well with the Matte Stainless
Who'da thunk it
-
Thanks, DenS, but it's a Limited that has a flat look due to my poor skills with the camera. I wanted the Hogue aluminum flames, but they couldn't get 'em for me.
-
Thanks, DenS, but it's a Limited that has a flat look due to my poor skills with the camera.
Nah, it's poor eye sight on my end :o
Now that I stop and look, I can see it's a LE
I LOVE the LE....TOO NICE ! ! !
-
Thanks again, DenS. Also of note is the SS mag base and the stock SS grip screw.
-
I already posted a pic of this. But I took another and like this one best.
(http://i179.photobucket.com/albums/w285/towboat_er/CZ75B026.jpg)
-
Thanks for taking the second picture... It truly looks like over a 1k pistol. I don't hate on other manafactuers, but I will say CZ got the 9MM stainless auto pistol by the Cojones!!! When I purchased a set of sequential numbered Pythons many years ago all my friends said to to to flashy Harold, now they say "Can I see them please...?"... Your CZ truly looks like a work of art... I also like the chrome mag and the stainless hex grip screws ~ nice touch. My money says you have or will have a stainless guide rod and Wolf Springs. I'm awaiting a set of grips from HAKAN (The undisputed Greatest Grip Maker on the planet!), but I have to say the grips on your CZ looks eatable! Bottom Line... Give her a name and keep her close!
-
Much thanks. Yep, the Hakin grips are beauties, for sure. My grips came from Thailand. This is definitely my favorite semi auto. A true easier to shoot.
I have installed a lighter wolf hammer spring. Thinking about a trigger job, but its not bad the way it is.
-
I love it. That is a great idea with the making of the base.
-
it hot. O0 O0
-
That's sexy! I just picked up a SP-01 Shadow and now I'm wanting a CZ 75B stainless.
-
Just received my CZ 75B in matte stainless. ;D
(http://i1252.photobucket.com/albums/hh580/SlimPickens33/NGH49903CZleft.jpg)
(http://i1252.photobucket.com/albums/hh580/SlimPickens33/CZ75BS001.jpg)
-
Just received my CZ 75B in matte stainless. ;D
SWEET
-
Just got my new CZ75B stainless. It's now my favorite pistol!
http://i1058.photobucket.com/albums/t407/jambobarber/CZ/DSC_0192.jpg
http://i1058.photobucket.com/albums/t407/jambobarber/CZ/DSC_0211.jpg
-
Just got my new CZ75B stainless. It's now my favorite pistol!
http://s1058.photobucket.com/albums/t407/jambobarber/CZ/?action=view¤t=DSC_0192.jpg
http://s1058.photobucket.com/albums/t407/jambobarber/CZ/?action=view¤t=DSC_0211.jpg
I can't understand why that would be your favorite pistol. Can't understand it at all. O0
Ha!
Gorgeous. I am, well I hate to use the word 'envious' but I can't think of a better one. One of those is going to have to be on my purchase list some time in the future. Congratulations on a fine acquisition.
-
Just got my new CZ75B stainless. It's now my favorite pistol!
(http://i1058.photobucket.com/albums/t407/jambobarber/CZ/DSC_0192.jpg)
(http://i1058.photobucket.com/albums/t407/jambobarber/CZ/DSC_0211.jpg)
Very nice Pistol you have there sir
Spent a lot of time around what was (probably) your old Base there in Poor Whiney Me (Port Hueneme)
-
Spent lots of time at Port Hueneme, Gulfport, Camp Pendleton, and South Vietnam.
-
^Congrats on the matte stainless. I just put a 13lb main spring in mine and the trigger is much better. You will like it even more.
-
Sir,
Where did you get the 13 lb main spring?
-
jambo, congrats on a great looking pistol, and i have to say i love the photo of it on your old uniform! thank you for your service to our country!
-
Sir,
Where did you get the 13 lb main spring?
I ordered it straight from the czcustom website.
-
I like to know how the 13lb works after 200 rounds or so... I found the CZ 14lb springs are closer to 12! I use a Wolff conventional 16-lb spring in my CZ-75 pistols as well as a shock buffer from Buffer Technologies. Takes a while for it to sit... but its worth the short wait. Denstinnet ~ Great idea on a uniform background... I may steal the concept on my next photo... OORAH!
-
Here is mine...
(http://www.pro-touring.com/%7Eandrewb/guns/CZ-75B.jpg)
Andrew
-
Very nice Andrew
-
There are too many SS pistols with blued steel mag bases out there. Their owners need to do something about it!!!
Joe O0 O0
-
Joe:
Do you make Stainless Bases for the 10 rounders ?
Those darned Commie Mags are a real pain :o
-
Joe:
Do you make Stainless Bases for the 10 rounders ?
Those darned Commie Mags are a real pain :o
Yep!!
http://www.czfirearms.us/index.php?topic=46794.0
-
Hey all, I was looking for some side by side pictures of matte and polished 75Bs to help me decide which to get, and Biggolden was gracious enough to take a couple excellent pictures of his! He told me I could post them on this forum so here they are:
(http://i798.photobucket.com/albums/yy268/1test123456/IMG_6915.jpg)
(http://i798.photobucket.com/albums/yy268/1test123456/IMG_6910.jpg)
Thank you sir!
P.S. I've posted this in another thread also because it's a perfect fit for these pictures; sorry if this is against the rules!
-
Hey all, I was looking for some side by side pictures of matte and polished 75Bs to help me decide which to get, and Biggolden was gracious enough to take a couple excellent pictures of his! He told me I could post them on this forum so here they are:
(http://i798.photobucket.com/albums/yy268/1test123456/IMG_6915.jpg)
(http://i798.photobucket.com/albums/yy268/1test123456/IMG_6910.jpg)
Thank you sir!
P.S. I've posted this in another thread also because it's a perfect fit for these pictures; sorry if this is against the rules!
They're gorgeous. Interesting how different finishes can be. One looks almost chrome. I like both of them though.
-
Very nice
Thanks for posting them
-
I wasn't sure which one i would get but that picture does it for me... polished ftw!
-
There are too many SS pistols with blued steel mag bases out there. Their owners need to do something about it!!!
Joe O0 O0
Joe,
Do you have a website? I would love to purchase some stainless base plates.
Andrew
-
PM sent.
Joe
-
I am new to the website and looking to purchase the CZ 75 (polished). I love the wooden handles on posts by Jsun, danwdooley, andrew70 and others. Which handles are these? Are they optional from CZ (I have only seen the stainless with the black)?
Also, does anyone have any leads on where I can find the polished...at a reasonable price (MSRP or less)? All of the dealers that I have contacted do not have any, and do not know when they will receive any.
-
I am new to the website and looking to purchase the CZ 75 (polished). I love the wooden handles on posts by Jsun, danwdooley, andrew70 and others. Which handles are these? Are they optional from CZ (I have only seen the stainless with the black)?
First, Welcome to the forum!
These grips can be found on the CZ-USA website. The grips shown in this thread are Cocobolo.
You can also find Walnut grips on the CZ-USA website. Here is the link.
http://shop.cz-usa.com/C-129/FULL-SIZE.aspx
-
Ahh...I found them. 75Plus...thank you! I had been looking at Hogue, VZ, etc. and could not find them. Thanks again.
-
They are sold at cz sustom too.
-
(http://img546.imageshack.us/img546/5/20120719192549728.jpg)
-
Very nice
I like the Grip Panels on the Stainless
-
Thanks for the great pictures, there is going to be a 75B SS in the near future.
Richard
-
I thought i was stainlessed up until Kazaam posted that polished next to the matte.
-
(http://img546.imageshack.us/img546/5/20120719192549728.jpg)
Those grips look great. I would like to try some of the VZ Grips options on my own CZ's.
-
(http://img20.imageshack.us/img20/3572/summer2012014.jpg)
By soulfish (http://profile.imageshack.us/user/soulfish) at 2012-09-05
-
Very Nice OD
I've always liked the Limited / LE
Second only to a DuoTone
-
This was one of my competition guns a couple of years ago
(http://img.photobucket.com/albums/v483/eerw/My%20stuff/IMG_0105.jpg)
This is the factory matt finish - untouched?
-
I can't speak for the owner but it looks to be "touched" by a blade tech holster...... :P
-
My 75b pictured with my primary carry (Springfield 1911 Micro-compact)
(http://i276.photobucket.com/albums/kk27/BuckJM53/75b-MicroC.jpg)
-
Very Nice BuckJm
-
Vern:
That is one sexy beast
Thank You Den. I wasn't quite finished yet, but just completed my 4 mag custom engraved plates. I came up with a 4 dot marking system that can identify each mag number or even be color coded for different ammo types. These are engraved (finished myself in the machine shop today) then engraved dots filled with paint. Spent quite some time finishing, but now own one of a kind pistol. :)
(http://www.ppdbillet.com/69%20Mach%201/funpics/CZ-75B-Custom-engrave.jpg)
Whoa, that is super shiny, how did you do that?
-
Very Nice BuckJm
Thanks DS :) . All it took was a marginal picture by me and some editing magic on Photobucket to make it look interesting ;)
-
(http://jsunn.zenfolio.com/img/s4/v68/p1116713848-4.jpg)
-
Nice pic Jsunn
And nice Pistols too
-
Nice Finish on the SPO-1 (brushed ss?)
Where did you have it done?
What is the vendor's name for the finish?
Thanks,
-
It is the Robar's NP3+ finish. Sent it off and 8 weeks later tada! You'll have to look it up on the Google
Sent from my SGH-T989 using Tapatalk 2
-
This thread should definitely be stickied!! Great pics guys
-
Picked up a new brushed 75
I'll take better pics after I'm done dressing it up
(http://i.imgur.com/zo3IVl.jpg)
-
very nice. is that the New Edition / Limited Edition ?
-
Whoa, that is super shiny, how did you do that?
I machine them, engrave, and polish myself. I have a few left for sale (polished or matte), and will be building more shortly.
The link in my signature will take you to the page to view or purchase.
Kevin
-
Nice lookin' Pistol there Josh
-
Just a basic 75b in matte
Got it in at the range and I can get them at cost so I nabbed it for $629
Amazing how the cost has shot up for them.
I grabbed the new grips from Stuart and I think they make the pistol look so much nicer.
Came with the wood grips but I never liked them as much
I have a few sets sitting in a box in the garage
-
I have a few sets sitting in a box in the garage
You need to put the ones you don't want up on the Classifieds....hint, hint
I?m always looking for nice Wooden Grips to dress-up my Ladies up for photo-ops
-
I have a few sets sitting in a box in the garage
You need to put the ones you don't want up on the Classifieds....hint, hint
I?m always looking for nice Wooden Grips to dress-up my Ladies up for photo-ops
PM me your address and they are yours
-
Just a basic 75b in matte
Got it in at the range and I can get them at cost so I nabbed it for $629
Amazing how the cost has shot up for them.
I grabbed the new grips from Stuart and I think they make the pistol look so much nicer.
Came with the wood grips but I never liked them as much
I have a few sets sitting in a box in the garage
Josh,
Does that gun have night sights?
-
Just a basic 75b in matte
Got it in at the range and I can get them at cost so I nabbed it for $629
Amazing how the cost has shot up for them.
I grabbed the new grips from Stuart and I think they make the pistol look so much nicer.
Came with the wood grips but I never liked them as much
I have a few sets sitting in a box in the garage
Josh,
Does that gun have night sights?
Yep
Came with the stock meprolights
-
Hi Josh,
I just picked up my first Stainless CZ and it came with the Red Coco grips and night sights. It was used so I was not 100% sure it came that way from the factory. The SKU is 91125 instead of the 91128 number listed on the CZ web site for the Matte Stainless version. So I guess it was some sort of special edition. Thanks for the feedback.
http://www.czfirearms.us/index.php?topic=50486.0
-
Hi Josh,
I just picked up my first Stainless CZ and it came with the Red Coco grips and night sights. It was used so I was not 100% sure it came that way from the factory. The SKU is 91125 instead of the 91128 number listed on the CZ web site for the Matte Stainless version. So I guess it was some sort of special edition. Thanks for the feedback.
http://www.czfirearms.us/index.php?topic=50486.0
Some of the names here really crack me up!!! USMCZ that is crafty! Another one is named BLANKCZEK, that's also rather inventive!
-
Yea, I crapped the bed on my username
I wasn't feeling very inventive
-
Yea, I crapped the bed on my username
I wasn't feeling very inventive
Ahwww, don't feel bad, obviously I just went for something that I enjoy a lot ;-)
-
Hi Josh,
I just picked up my first Stainless CZ and it came with the Red Coco grips and night sights. It was used so I was not 100% sure it came that way from the factory. The SKU is 91125 instead of the 91128 number listed on the CZ web site for the Matte Stainless version. So I guess it was some sort of special edition. Thanks for the feedback.
(http://i762.photobucket.com/albums/xx261/T_MAY88/CZ75BSS2.jpg)
With the Polished Slabs and Matte Contoures, it looks to be a Limited or Limited Edition
Or someone took the time to copy their finish
No matter what......
Great find
-
Night sights, polished and matte combo, it is the Limited Edition (or New Edition as known in EU). Very nice.
-
Some of the names here really crack me up!!! USMCZ that is crafty! Another one is named BLANKCZEK, that's also rather inventive!
Thanks ...I had to find something new on this forum as my usual screen name was already in use. As a former Marine...it just came to me on the spot.
It is also very easy to remember.
-
Some of the names here really crack me up!!! USMCZ that is crafty! Another one is named BLANKCZEK, that's also rather inventive!
Thanks ...I had to find something new on this forum as my usual screen name was already in use. As a former Marine...it just came to me on the spot.
It is also very easy to remember.
I applaud you - it is both simple and inginious ;-)
-
Hey guys, here are a couple of pictures of my High Polish which I just got. It's my first gun so it was pretty hard just putting it down to take some pics!
I'll post more when my new grips come in!
EDIT! Almost forgot to thank 75PLUS for the stainless base plate, it really finishes off the pistol.
(https://lh4.googleusercontent.com/-kQqo6OJ2pN0/UH37qB56-DI/AAAAAAAAADA/fyMVXV0klBw/s800/20121016_161510.JPG)
(https://lh6.googleusercontent.com/-dNbEStaVnoE/UH37r2ZxukI/AAAAAAAAADQ/kXLEWCYBa7Y/s800/20121016_172602.JPG)
-
Excellent pictures Sir!
-
Love it! Congrats! You made a great decision for your first pistol.
-
Nice looking gun! Let me know if you want to sell the grips when you get new ones :)
-
Thanks guys, I'm glad you like the pictures. I'm also happy I made this my first choice for a gun, it just feels right holding it.
Hey canoeist, the grips in the pics are rosewood and if I decide to sell the grips I'll PM you first.
-
Thanks guys, I'm glad you like the pictures. I'm also happy I made this my first choice for a gun, it just feels right holding it.
Hey canoeist, the grips in the pics are rosewood and if I decide to sell the grips I'll PM you first.
really beautiful. :)
-
Hey House
SWEET PIECE you got there
-
Really amazing pictures there. Lighting is critical and both shots are lit and framed expertly. What a stunning example of a 75B, belongs in a catalog. Those stainless baseplates should be factory, just perfect. :) :)
-
Really amazing pictures there. Lighting is critical and both shots are lit and framed expertly. What a stunning example of a 75B, belongs in a catalog. Those stainless baseplates should be factory, just perfect. :) :)
The Base Plates really do set it off! Thanks again re the pics. The first was using available lighting and the second was using bounced flash lighting.
-
House, talk about a Barbecue Piece! Super photography and grips.
-
Here is an updated pics with VZ grips and ball milled / engraved plates.
Also I added a pic of the difference between matte an polished plates as I had a couple PM's asking for a pic.
(http://www.ppdbillet.com/images/CZ-plate-3.jpg)
(http://www.ppdbillet.com/images/CZ-plate-4.jpg)
-
I gotta get one of these.
-
I could not stand just looking at Joe's base plates any longer. Can you see the smile on the 75 SS? They are nice and match the matte finish perfectly.
(http://i1275.photobucket.com/albums/y451/jpeale/DSCN3000_zpsd1bd6991.jpg)
-
Verndog that gun is beautiful! The grips and baseplate really set it off!
-
Looks very very nice there Skip
-
Looks very very nice there Skip
Thanks, I have been seeing these for awhile and decided to dress up my ss CZ's. Thinking of grips too, but I really like the Houge and CZ rubber.
-
Thinking of grips too, but I really like the Houge and CZ rubber.
I like the Hogue Rap Around Grips myself
With these Torx Screws;
http://czscrews.angelfire.com/
-
Den,thanks for that site. I am a fan of torx head screws. Recently I had to use a torx head driver to remove a stripped hex head in one of my 1911's.
-
I am a fan of torx head screws
Here's a couple pics with my three with Torxs:
(http://i1108.photobucket.com/albums/h414/denstinettm14/TheTrio-1.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/TorxScrews.jpg)
-
Those look good. I will keep a watch on his site, there was post that orders were on hold until the end of the month.
-
Those look good. I will keep a watch on his site, there was post that orders were on hold until the end of the month.
Family matters resolved, I'm ready to ship again. http://czscrews.angelfire.com/index.html (http://czscrews.angelfire.com/index.html)
-
Family matters resolved, I'm ready to ship again. http://czscrews.angelfire.com/index.html (http://czscrews.angelfire.com/index.html)
Cool....... they are well worth the $$$$$$
-
(http://img507.imageshack.us/img507/5642/dscn0119h.jpg)
Third attempt at posting pics ???
-
...and this is a pic of my CZ75B Stainless matte.
I'm still struggling a bit with accuracy (compared with other pistols, but it's the shooter's fault!). I think I need thinner grips to improve on my shooting.
(http://i1130.photobucket.com/albums/m540/malteser2710/Firearms/PICT0029.jpg)
-
I could not stand just looking at Joe's base plates any longer. Can you see the smile on the 75 SS? They are nice and match the matte finish perfectly.
(http://i1275.photobucket.com/albums/y451/jpeale/DSCN3000_zpsd1bd6991.jpg)
I got a bunch of 17 rounders with the plastic baseplates. I could put these matte stainless plates on my two plain 16 rounders for extra bling!
-
where did you find the baseplates? Neat! Do they come in shiny SS?
-
Woo Hoo! Finally got my 75B SS today! Ordered extras - halfchecked cocobolo grips and SS screws, along with some sweet custom mag base plates.
I'm a happy camper!
Trying again to load up the pix: (http://imageshack.us/a/img39/5971/cz1qa.jpg)
and a close up of the custom baseplate
(http://imageshack.us/a/img42/7164/cz2cg.jpg)
-
where did you find the baseplates? Neat! Do they come in shiny SS?
Yes, check this out...They're too nice
http://www.czfirearms.us/index.php?topic=25806.0
-
If it uploads, this is slow fire weak hand (only) at 10'. I've shot less than 20 rds weak handed in my life. Took my time getting left hand and right eye in sync.
(http://img.tapatalk.com/d/12/12/27/a5ejuje9.jpg)
This is with stock new 'Special Edition' stainless in 9mm. I'm loving it!
-
Nice gun Kraaken. The only thing I would change on those baseplates would be to angle the rear of the plate to sit flush with the pistol. Due to the material thickness, I think there is room to do this and it would improve the look. They look exceptionally well polished though. The guy that does these is one of those rare people that gives a bleep about what they produce.
-
Verndog is doing exceptional job with this plates.
-
Updated pics with a set of custom Hakan Pek grips. The wood I chose was a Two Tone Amboyna.
Seriously though, the pictures do not begin to show how nice they are in person.
(https://lh4.googleusercontent.com/-KAx-htWCH64/UOSu7gydKAI/AAAAAAAAAFE/Q43sC_7-BKM/s1280/20130102_154920.JPG)
(https://lh6.googleusercontent.com/-YHHqCVuKRhY/UOSu9aSEEyI/AAAAAAAAAFM/J5oQFu5TPNU/s800/20130102_155112.JPG)
-
Gorgeous!
-
At first glance I suspected those were Hakan's grips. He does incredible work. Wow, what a package. :o
-
Cool pix!!!! Love the mag plates a wonderful touch....also love the idea of naming 'em.....mine's named Iva!
-
Thanks guys, I'm really happy with the way it's turned out. Iva, what a beautiful name!
-
Nice gun Kraaken. The only thing I would change on those baseplates would be to angle the rear of the plate to sit flush with the pistol. Due to the material thickness, I think there is room to do this and it would improve the look. They look exceptionally well polished though. The guy that does these is one of those rare people that gives a bleep about what they produce.
Thank you, the original design came from Joe here and with a few minor tweaks I tooled, programmed, cnc machined, and polish every one myself as a side hobby. I considered extending them also, but it will make the plate heavier, thicker, and then you get into the radius on the grip that depending on grip can change and mismatch. Also, that end of the butt looks pretty darn good stock, so it was left @ stock length.
Here is a closeup of the end blend from another angle.
(http://www.ppdbillet.com/images/CZ-plate-1.jpg)
-
Here is my Polished SS sporting Crimson Trace grips and a "weak hand pinkie rest" base plate.
(http://i944.photobucket.com/albums/ad289/AlveyJoe/DSCF0074.jpg)
(http://i944.photobucket.com/albums/ad289/AlveyJoe/DSCF0073.jpg)
Joe
Wow, that pinky rest mag base plate is sweet....... If you have any more I'd love to buy a few. Also... And I'm just asking... You don't have anything like the extended base plate on the 18 round mag like on the sp01?
Grant
-
PM sent.
Joe
-
My stainless 75c.
(http://i977.photobucket.com/albums/ae259/zdadthrice/My%20Pistolas%20-%20May%202012/grip4.jpg)
(http://i977.photobucket.com/albums/ae259/zdadthrice/My%20Pistolas%20-%20May%202012/IMG_6172e.jpg)
(http://i977.photobucket.com/albums/ae259/zdadthrice/My%20Pistolas%20-%20May%202012/grip5.jpg)
(http://i977.photobucket.com/albums/ae259/zdadthrice/My%20Pistolas%20-%20May%202012/a1_zpsdb69be25.jpg)
(http://i977.photobucket.com/albums/ae259/zdadthrice/My%20Pistolas%20-%20May%202012/CZ75_compact_cross-process.jpg)
-
Nice pistol you got there Easy CZ, congrats!
-
Thanks, house! I was sure sad to hear CZ discontinued the satin stainless finish on the Compact.
-
Did you install full length guide rod by yourself?what did you drill the hole with?
-
Did you install full length guide rod by yourself?what did you drill the hole with?
The pistol is actually a Satin Nickle finish Compact. All the compacts come with full length guide rods due to the length of the slide.
Joe
-
nice looking pictures guys. looks like for some of you photography is a hobby as well as Cz's
-
(http://www.go-itech.com/cz75b.jpg)
-
Deeelish
Great pic too
-
Here's my matte after some work....(http://img.tapatalk.com/d/13/01/28/etyry6ad.jpg)
-
Have you considered cerakoting the hammer to match? It's odd looking with the matte stainless controls. Nice hammer though, I need one of those too.
-
Have you considered cerakoting the hammer to match? It's odd looking with the matte stainless controls. Nice hammer though, I need one of those too.
no, but I thought of adding black controls for manual safety and slide release. It really doesn't bother me though, I like the black on stainless look; reminds me of many stainless 1911s out there.
-
...... but I thought of adding black controls for manual safety and slide release. It really doesn't bother me though, I like the black on stainless look......
Kinda like this
Here's my Duo Tone Semi-Compact
It's a Matte Stainless frame with Controls from a B-SA
CZC Trigger and a B Hammer
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZs/CZ75BSemi-CompactDouTone-2.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZs/CZ75BSemi-CompactDouTone-1.jpg)
-
The problem with black controls on a stainless pistol is that it would then be mistaken for a Satin Nickle one.
Joe
-
The problem with black controls on a stainless pistol is that it would then be mistaken for a Satin Nickle one.
Joe
Well, they can think what they'd like.....I know it's Stainless
And who ever ends-up with it after me, will know and love it just as much as I do
-
...... but I thought of adding black controls for manual safety and slide release. It really doesn't bother me though, I like the black on stainless look......
Kinda like this
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZ75BSemi-CompactDouTone-2.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZ75BSemi-CompactDouTone-1.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZ75BSemi-CompactDouTone.jpg)
Yes, exactly like that! perfect!
-
(http://imageshack.us/a/img542/3733/dscn4082f.jpg)
-
(http://imageshack.us/a/img541/6905/dscn4078a.jpg)
-
(http://imageshack.us/a/img14/9665/dscn4054copy.jpg)
-
(http://imageshack.us/a/img221/7526/dscn4069.jpg)
-
(http://imageshack.us/a/img842/3936/dscn4054p.jpg)
-
Very Pretty
My Blackhawks are all Blued
Don't own a GP100
But my two Redhawks and two SP101s are (of course) Stainless
-
My IPSC production gun. Thanks to Vinnie for fixing the picture up.
(http://app4.websitetonight.com/projects2/7/1/4/7/1847417/uploads/stainless_Limited_Edition_IPSC_Production_jammy.jpg)
I use CZ 75 SPO1 Shadow for the IPSC production and I have a CZ 75 Satin Nickel that I want to try. What replacement sights did you put on this one?
Thanks
-
New grips.
(http://img.photobucket.com/albums/v429/TimDawg/IMAG0568_zps4e1d7d04.jpg)
-
Very nice
I love to see them in nice wood Grips
-
Nice
-
(http://aspencreekoutdoors.com/temp/cz75bstainless.JPG)
Here is my new stainless. It is smooth as butter and sucked me in. It's my first CZ, but have a second on order. A P-01, after selling off an old Firestar. I've been lurking for a couple of months, and find this forum very informative!
-
OMG. Outstanding pix! Congrats!
-
Thanks Kraaken!
-
Wow, that's a true beauty Scott
Hey, and welcome to the Forum sir
-
Thanks DenStinett! ppdbillet's magazine plates are a work of art.
-
yes they truley are a work of art. I just got some for mine as well. waiting on CGW to get me some stainless grips screws. I have the half choco's on mine thinking of switching to something else.
-
Thanks DenStinett! ppdbillet's magazine plates are a work of art.
yes they truley are a work of art. I just got some for mine as well
They look like they were from VernDog (?)
http://www.czfirearms.us/index.php?topic=45099.msg260918#msg260918
-
They look like they were from VernDog (?)
Yes that is correct. It's amazing what that one change makes to the look.
-
They look like they were from VernDog (?)
Yes that is correct. It's amazing what that one change makes to the look.
He does very fine work
-
Thank you guys! Love to see that wood grain desk reflection on that nice SS billet...makes it all worth while. 8)
I think my last couple went out to Texas a week or so ago...but no worries, a bunch more coming. Also, if anyone gets any wear marks that aren't too deep, I'll fix them up good as new free for just shipping cost ( CZ forum special service). ;)
-
This is a "Special Edition" 75B stainless. I put on a Hogue wraparound grip. Try as I might, I just couldn't shoot well with the TruGlo open sights with my old eyes. I've had good results with a red dot on my S&W M41, so put a red dot on the SE. See what you think:
http://www.flickr.com/photos/76799244@N03/8621801761/#/photos/76799244@N03/8621801761/lightbox/http://
If you can clue me in on how to have this show inline rather than a link.... or isn't flikr good for that?
Thanks!
-
Very nice
I truly love the looks of the SE
Next you need to get a couple of Joe (75Plus) or Verndog's Stainless Mag Base Plate(s)
They really finish-off the Pistol's look
ENJOY 8)
-
Nice pistol Zardoz!
-
She's home, and she's bone stock. :)
(http://img.photobucket.com/albums/v446/efuseakay/image_2.jpeg)
-
For now she's bone stock, congrats !! She's beautiful !!
-
Ty. And yes. For now. I said that about my car too, then 3 weeks later, full exhaust, intakes, tune. lol
-
Ty. And yes. For now.
Very nice
Beautiful Matte Stainless
Now you need to get yourself a couple of 75Plus / Joe's Matte Stainless Mag Base Plates
They really finish-off the Pistol's look
http://www.czfirearms.us/index.php?topic=25806.msg159180#msg159180
-
Yeah I saw those. Now don't remind me again! lol
-
Yeah I saw those. Now don't remind me again! lol
My Bad ! ! ! 8)
-
Here are pictures of my new shiny toy.
I added cocobolo grips with czcustom screws. The new screws were expensive (as for screws), but I think the original screws don't belong there.
Also, I added a magazine plate and a lanyard loop. I wished the loop was stainless, but its not. I will probably get used to it.
Without the plate and the lanyard loop the handle was ending kind of abruptly. There was no reason for it:)
Best regards.
(http://i1279.photobucket.com/albums/y534/Svoboda66/042EE053-6F15-4E49-8C8F-9AF70BD84568-3220-000002FAC93FE084_zpsc51555cc.jpg)
(http://i1279.photobucket.com/albums/y534/Svoboda66/7F94C2A5-E77D-4ED8-B1FF-DA1C0B3171C2-3220-000002FAD19222A8_zpse3b23dec.jpg)
(http://i1279.photobucket.com/albums/y534/Svoboda66/907411A4-C14A-4CD4-B86D-52A84E46CA5D-3220-000002FAD7B21BD9_zps450ff2d4.jpg)
-
Svoboda:
That thing is SICK !
I love the Grips and the Stainless Bases are too nice
ENJOY my friend
-
All dressed up with plenty of places to go! Nice....and congrats. 8)
-
I never get tired of drooling over these stainless guns. With the wood grips and stainless mag plates they look so classy. Keep 'em coming guys!
-
Thanks Jsunn for the grips. Included is the new shoulder holster from 4gun and some custom engraving of my initials under the trigger guard.
(http://imageshack.us/a/img811/8247/dsc02351y.jpg)
(http://imageshack.us/a/img13/6131/dsc02348eb.jpg)
(http://imageshack.us/a/img51/3384/dsc02347n.jpg)
(http://imageshack.us/a/img542/7118/dsc02346l.jpg)
(http://imageshack.us/a/img40/5213/dsc02345.JPG)
-
Mother's day present for my wife. (The grips, screws and base plates)
(http://img.tapatalk.com/d/13/05/10/mutube3u.jpg)
-
So many great Stainless CZs' have been pictured... I thought I bring this picture out of my archives...
(http://s19.postimg.org/w6ktbrrk3/King_Harold_CZ_75_B_Gloss_Stainless.jpg)
-
Not quite a 75B Stainless but for certain it's CZ (DW)... bet if CZ did a 75B in Big Bore it would look similar to their DW Heritage .45 cal Stainless... Well ~ maybe?!
The grips are by HAKAN (the KING OF GRIPS) and the mags are Tripp (1911's love 'em)...
(http://s19.postimg.org/c5ln4tlc3/King_Harold_Big_Bore_DW_Heritage.jpg)
-
Wow. I did not follow this thread for sometime. Very nice guns and pictures.
-
Went to buy it this weekend. Picking it up next sat. This is my first gun, besides a crappy .22 I owned as a child 20+ years ago.
(http://s23.postimg.org/dne206iln/IMG_1847.jpg)
-
I think I posted to this thread but that was with factory grips and base plates. Here she is all dressed up ....
(http://img.tapatalk.com/d/13/05/23/pu2etamy.jpg)
(http://img.tapatalk.com/d/13/05/23/ezuhasuq.jpg)
(http://img.tapatalk.com/d/13/05/23/eva2aqu8.jpg)
-
Came out very nice there P3
-
I'm dying to see someone chrome or nickel plate an SP01 tactical. Ridiculous idea, I know, but I bet the lines look nice brightened up. Weren't some of them two tone with a steel frame and black slide or vice versa?
-
I'm dying to see someone chrome or nickel plate an SP01 tactical. Ridiculous idea, I know, but I bet the lines look nice brightened up. Weren't some of them two tone with a steel frame and black slide or vice versa?
black slide, steel frame...and it would be SWEET to see an SP-01 all shiny and whatnot
-
Just joined the 75B stainless club. I've already done a trigger job, changed the hammer spring to CGW 11.5#, and VZ zebra frag grips. I'm going to order either a CZ customs or CGW hard chrome race hammer. Also going to order some polished and matt base plates from Joe. Picking up my matt stainless as my bday present to me this month.
(http://i20.photobucket.com/albums/b250/caliSTi/null_zps2e5f50c5.jpg) (http://s20.photobucket.com/user/caliSTi/media/null_zps2e5f50c5.jpg.html)
(http://i20.photobucket.com/albums/b250/caliSTi/null_zps84c2a43e.jpg) (http://s20.photobucket.com/user/caliSTi/media/null_zps84c2a43e.jpg.html)
-
Looks great Cagls
Yeah, those Stainless Mag Bases are sweet
Either Joe's or Kevin's (Verndog)
-
this thread brings a tear to my eye, as I need to sell mine now.
-
...........as I need to sell mine now.
NOoooo
Say it isn't so ! ! !
-
NOoooo
Say it isn't so ! ! !
Sadly..it is. I havent even had it a month. Im letting it go cheap, if anyone is interested. Has 2 billet mag bases too.
-
NOoooo
Say it isn't so ! ! !
Sadly..it is. I havent even had it a month. Im letting it go cheap, if anyone is interested. Has 2 billet mag bases too.
pm'd you.
-
replied...and for others...
http://www.czfirearms.us/index.php?topic=56377.0
-
I polished up a CZ SAO straight trigger and put it on my polished stainless. Now waiting for the hard chrome CGW race hammer, lightened trigger return sping, and floating trigger pin to arrive:
(http://i20.photobucket.com/albums/b250/caliSTi/null_zps5e55d4b4.jpg) (http://s20.photobucket.com/user/caliSTi/media/null_zps5e55d4b4.jpg.html)
-
CAGLS...
Love those grips, where did you get them?
Cost?
Also... what's the green thing near the beavertail? Just a light reflection?
-
The green is a reflection. These are VZ g10 frag grips in zebra. You can buy them direct from VZ for $75 or on Amazon.com.
-
Thnx... they look great.
-
I polished up a CZ SAO straight trigger and put it on my polished stainless. Now waiting for the hard chrome CGW race hammer, lightened trigger return sping, and floating trigger pin to arrive:
(http://i20.photobucket.com/albums/b250/caliSTi/null_zps5e55d4b4.jpg) (http://s20.photobucket.com/user/caliSTi/media/null_zps5e55d4b4.jpg.html)
What's the green thing in the corner? Gummibear? ;-)
-
I polished up a CZ SAO straight trigger and put it on my polished stainless. Now waiting for the hard chrome CGW race hammer, lightened trigger return sping, and floating trigger pin to arrive:
(http://i20.photobucket.com/albums/b250/caliSTi/null_zps5e55d4b4.jpg) (http://s20.photobucket.com/user/caliSTi/media/null_zps5e55d4b4.jpg.html)
What's the green thing in the corner? Gummibear? ;-)
Lol, that's an adhesive target stuck on a silhouette target. Can you see my face on the slide?
-
sorry for blasting this everywhere.. but i have to sell it.
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=346250483
-
sorry for blasting this everywhere.. but i have to sell it.
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=346250483
If your going to advertise your gun for sale here, I suggest you at least post your own pictures of your own actual magazines and not cropped 2 mag pictures from my website.
-
I purchased them from you. I cropped it because i dont want people thinking im selling a gun with different grips. People use "stock" photos all the time. If it were the gun i think it would be an issue...but the bases...common. Hell, this is free advertising for you anyways....so relax.
-
meh...now you have me feeling bad. Ill take and post actual photos when i get home tonight.
-
I purchased them from you. I cropped it because i dont want people thinking im selling a gun with different grips. People use "stock" photos all the time. If it were the gun i think it would be an issue...but the bases...common. Hell, this is free advertising for you anyways....so relax.
It's not just about me, the pics I couldn't care less. But consider there are plenty of scammers out there selling scams. You are here only about a month, buy a new CZ then a little over 2 weeks later sell a "new" CZ using pictures that at least one is not yours. Sets off flags and may scare off legit buyers that notice and look for this.
-
I get that and I am sorry I did that. I didnt have time to take photos, otherwise they would be changed out. I will surely have them updated over the weekend. In the future, I will know what not to do. Thank you.
-
Here is my new CZ 75b Matte Stainless!
(http://i1363.photobucket.com/albums/r701/crneil/IMG_8778_zpsb8f9dd51.jpg) (http://s1363.photobucket.com/user/crneil/media/IMG_8778_zpsb8f9dd51.jpg.html)
(http://i1363.photobucket.com/albums/r701/crneil/IMG_8775_zps977e11dd.jpg) (http://s1363.photobucket.com/user/crneil/media/IMG_8775_zps977e11dd.jpg.html)
-
Welcome to the Forum
Nice little CZ you got there
ENJOY
-
New pic:
(http://i20.photobucket.com/albums/b250/caliSTi/null_zps723e68df.jpg) (http://s20.photobucket.com/user/caliSTi/media/null_zps723e68df.jpg.html)
-
This is mine, I gave it a brushed finish there is an old thread called "My Brushed Stainless CZ" in this forum on how I did it. Had to google it to find it. Anyway it has some nice grips off ebay from Thailand, grip screws, A DPM recoil reduction system, gave it a good trigger job, some black magic skateboard tape off amazon, lower power mainspring. The last picture shows the brushed grain better. (http://i1111.photobucket.com/albums/h477/TTro33/DSC01519.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01519.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC01520.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01520.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC01521.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01521.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC01522.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01522.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC00977.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC00977.jpg.html)
-
How does it perform with the Fastfire?
-
Fast fire? If your talking about the DPM recoil reducer. It seems to have less muzzle flip. The whole idea I think is it spreads out the recoil over a little extra time so that the main impulse of energy or kick doesn't overpower you as much resulting in less muzzle flip. You can't beat newton and his laws of physics, but you can spread out the energy so it doesn't overpower you all at once. I like it.
-
This is mine, I gave it a brushed finish there is an old thread called "My Brushed Stainless CZ" in this forum on how I did it. Had to google it to find it. Anyway it has some nice grips off ebay from Thailand, grip screws, A DPM recoil reduction system, gave it a good trigger job, some black magic skateboard tape off amazon, lower power mainspring. The last picture shows the brushed grain better. (http://i1111.photobucket.com/albums/h477/TTro33/DSC01519.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01519.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC01520.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01520.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC01521.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01521.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC01522.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC01522.jpg.html) (http://i1111.photobucket.com/albums/h477/TTro33/DSC00977.jpg) (http://s1111.photobucket.com/user/TTro33/media/DSC00977.jpg.html)
Your brushed finish looks nice. I might do this if I get a 3rd stainless.
-
Some updates
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/p480x480/9066_10201391786540442_2019507830_n.jpg)
-
Some updates
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/p480x480/9066_10201391786540442_2019507830_n.jpg)
Nice, where'd you find the silver non checkered aluminum grips?
-
czcustoms.com I'm still waiting for them to stock the Euro checkered aluminum grips.....maybe someday...maybe never
-
Hello,
I think we need a consolidated place were we can post pictures of, probably one of the sexiest 9mm ever designed. A lot of other firearms forums have dedicated picture threads.
So please post your beauty.
Here is a shot of mine. Her name is Sandra. I'll post a few more when I get a chance to get her in her new digs.
(http://jsunn.zenfolio.com/img/s11/v36/p785533631-4.jpg)
(GUN PORN ALERT)
HNNNGH! Nice gun!
-
They sure polish-up nice
-
Here is a recent shot of my baby!
(http://www.mhubbardphotography.com/Still-Life/Showcase-Photos/i-nVRrrvr/0/L/Traveling%20Companions-L.jpg)
-
Here is a recent shot of my baby!
what grips are those?
-
what grips are those?
Look to be Hogue, Wraparound Finger Grip
http://www.midwayusa.com/product/333567/hogue-wraparound-rubber-grips-with-finger-grooves-cz-75-eaa-witness-9mm-tanfoglio-springfield-p9-sphinx-black
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZs/CZ75BSemi-CompactDouTone-2.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZs/CZ75BSemi-CompactDouTone-1.jpg)
-
Here is a recent shot of my baby!
what grips are those?
Hogue!
-
These are some the best pics of CZ75'S that I've ever seen. I can't seem to locate a Polished version anywhere. Hopefully this is not a dumb question,but if you take a matte stainless and polish it will it be a glossy stainless?
-
Hopefully this is not a dumb question,but if you take a matte stainless and polish it will it be a glossy stainless?
I've always believed;
The only dumb question, is the one not asked 8)
Short answer....YES
You have to strip the Frame bare, and use a LOT of Elbow Grease and loving time....but they do polish-up very nicely
I think they look GREAT if you leave the Controls, Trigger, Hammer and the Slide / Cocking Serrations Matte
-
OK, thanks for the info Den,that gives me another option if i can't find a polished one.
-
Hopefully this is not a dumb question,but if you take a matte stainless and polish it will it be a glossy stainless?
I've always believed;
The only dumb question, is the one not asked 8)
Short answer....YES
You have to strip the Frame bare, and use a LOT of Elbow Grease and loving time....but they do polish-up very nicely
I think they look GREAT if you leave the Controls, Trigger, Hammer and the Slide / Cocking Serrations Matte
Mine was a matte Stainless. I sanded and sanded and polished her to a bright finish.
-
It looks excellent.
-
CZ75B L/E with some help from Haken.
(http://i1226.photobucket.com/albums/ee405/james656591/CZ/IMG_4186_zpsd5ffd324.jpg) (http://s1226.photobucket.com/user/james656591/media/CZ/IMG_4186_zpsd5ffd324.jpg.html)
(http://i1226.photobucket.com/albums/ee405/james656591/CZ/IMG_4188_zps302fd9ed.jpg) (http://s1226.photobucket.com/user/james656591/media/CZ/IMG_4188_zps302fd9ed.jpg.html)
-
I have always liked the Limiteds
That Matte / Polished combo is just too nice
-
James1, Now you need help from "verndog" or me!!
Joe
-
Some beautiful looking guns here!!
-
James1, Now you need help from "verndog" or me!!
Joe
I agree! The stainless mag plates finish it. Here is mine with some of Joe's work.
(http://img.tapatalk.com/d/13/09/12/esypuza8.jpg)
(http://img.tapatalk.com/d/13/09/12/ybyza6av.jpg)(http://img.tapatalk.com/d/13/09/12/ve9uqygu.jpg)
-
Sweet Bling, P3
-
This is my favorite gun pic thread on any forum by far! There are some absolute beauties in this thread!
-
James1, Now you need help from "verndog" or me!!
Joe
Only CZ handgun I own mate.
Also my most accurate along with my SR1911.
-
Here is a couple of base pads that will soon adorn the 10 round magazines of a Canadian CZ75 Stainless. I modified two of Verndog's logo plates to attach to two base pads that I modified. Really looks great. I decided not to show them in a pistol as the new owner should have that opportunity.
(http://i944.photobucket.com/albums/ad289/AlveyJoe/Base%20Plates/10RndStainless_zpseebd5d96.jpg) (http://s944.photobucket.com/user/AlveyJoe/media/Base%20Plates/10RndStainless_zpseebd5d96.jpg.html)
Joe
-
Excellent work Joe. Way to go above and beyond to get another happy CZ owner a nicely finished pistol. Were you able to just add the 82 or 100 deg countersink to the plates, or did you have to bore the hole open as well?
-
(http://i994.photobucket.com/albums/af62/varmint22/B032642_zps922747b5.jpg) (http://s994.photobucket.com/user/varmint22/media/B032642_zps922747b5.jpg.html)
Here is a pic of my Stainless CZ, nothing special, yet. I still have some work to do on it.
-
Excellent work Joe. Way to go above and beyond to get another happy CZ owner a nicely finished pistol. Were you able to just add the 82 or 100 deg countersink to the plates, or did you have to bore the hole open as well?
Just had to countersink the existing hole. The the diameter of the head of the screws I used are somewhat smaller than the specs indicate which worked in my favor. Looking forward to the new owner's comments.
Joe
-
(http://i944.photobucket.com/albums/ad289/AlveyJoe/Base%20Plates/10RndStainless_zpseebd5d96.jpg)
As per usual, Great job
These look so nice
Next.....Matte Stainless ? ? ?
-
(http://i533.photobucket.com/albums/ee337/laserdoc85/IMG_0168_zps8d856ede.jpg) (http://s533.photobucket.com/user/laserdoc85/media/IMG_0168_zps8d856ede.jpg.html)
-
(http://i994.photobucket.com/albums/af62/varmint22/20131104_114157_zps88e54d3d.jpg) (http://s994.photobucket.com/user/varmint22/media/20131104_114157_zps88e54d3d.jpg.html)
Just added some frag grips from VZ. 8)
-
Very nice guys
Hey Skin, all you need now is a couple of Joe's (75plus) Stainless Base Plates 8)
-
I'm putting them in the budget!
-
Here's mine.
(http://i56.photobucket.com/albums/g172/snapshot762/DSCN0313.jpg) (http://s56.photobucket.com/user/snapshot762/media/DSCN0313.jpg.html)
-
This is my work in progress, my polished stainless 75 B with SS base plates from Verndog at ppdbillet.com (http://ppdbillet.com) and half-checkered cocobolo grips with SS hex screws from czcustom.com (http://czcustom.com). Next month I'm gonna try to send my slide off to Schmeky at cajungunworks.com (http://cajungunworks.com) for a Dawson Precision fibre-optic front sight and rear LPA sight. I'm still waiting to hear back from Hakan Pek in the hopes of acquiring some Flame Ambroina and maybe also some American Walnut grips. Stay tuned!
Kudos and thanks to both Verndog and CZ Custom for quickly shipping my orders and for their beautiful products. They made a world of difference in my pistols appearance.
(http://i1055.photobucket.com/albums/s509/kwizzer2869/gripsbaseplate_zps9588b03a.jpg)
-
Nice! I love the ss bases!
-
Guess who got a camera for Christmas??? ;D I'm finally able to post some decent pictures of my stainless, they aren't nearly as good as some of the others I've seen here but at least they are decent. Got a couple more mods happening next month which will dramatically change how the pistol looks but this is it now.
(http://i1055.photobucket.com/albums/s509/kwizzer2869/GEDC0017_zps63c4e137.jpg)
Those are Federal 124 gr. +P HST hp's in it.
(http://i1055.photobucket.com/albums/s509/kwizzer2869/GEDC0018_zps4eb55c89.jpg)
-
SWEET ! ! ! 8)
-
rlavallee, very nice!
Den: For your eyes..
(http://i938.photobucket.com/albums/ad226/coolbox18/4%20CZs%20and%20a%20DW/20140114_153906_zpscb45665c.jpg) (http://s938.photobucket.com/user/coolbox18/media/4%20CZs%20and%20a%20DW/20140114_153906_zpscb45665c.jpg.html)
-
Den: For your eyes..
Stop it, you ?P? teaser you ! :P
OH wait?.
For all you dirty minds out there?..?P? is for Pistol ! O0
-
For all you dirty minds out there?..?P? is for Pistol !
It takes one to know one!
Of course, we all know what you meant by 'P'...
-
Wow, all very nice. Thanks for sharing folks.
-
this thread is giving me a lot of ideas
on how to spend a lot of money
I didn't need more help
-
You guys have probably never seen this before, but here's my polished stainless after the CGW kit (complete) install ... 7 lb DA and 4 lb SA trigger with 13 lb hammer spring. Meprolight sights ...
-Mike
CZ 75B with complete CGW trigger/hammer kit, Bedair SS Guide Rod, Mepro Tritium sights, Hogues ...
(http://img.photobucket.com/albums/v300/Hamfisted/Guns%20and%20Things/CZ75BHoguesCGWMeproLites_zps1cce83a1.jpg)
-
I've been a revolver shooter in the past, but didn't shoot for 19 years. I was good at it. Don't know why I stopped. Late last year I hauled out my old girlfriend. She's a blued 6" S&W 586 (no dash) Distinguished Combat Magnum named Missy. We went on a date to the range and shot up all my stock of 38 special and 357 magnum loads. Like, I don't know, 450 rounds. We were at the range for a whole afternoon. She was the only revolver all that time. I felt bad for her. BTW included in our menu choices that afternoon were my last 100 rounds of 38 special wadcutter that were manufactured in Yugoslavia and purchased at Walmart in Norman, OK for $5.95 a box of 50 back in the 1980s! No more Yugoslavia, we all know how that went, but the ammo was excellent.
SO...I needed more ammo, but then I decided -- maybe I needed to get a new girlfriend. Semi-automatic was necessary since I despeartely need to avoid being perceived as an old man with an even older gun. "OMG what is that?" "Is it a 22?" Then I had to decide. 9mm? 40? What? WHAT? So many choices. Saw the CZ-85 Combat and thought, "Yeah, that would be sweet." Then she caught my eye. Stainless. Something I'd made a rule about. Never again to have a firearm that wasn't made from stainless. Unless it's a .22 -- I can live with that.
Shopped the 'net and put together the deal for my new girlfriend about 2 weeks ago...she finally arrived at my dealer 2 days ago...we accomplished the FFL transfer yesterday afternoon and I brought Koko home. She's named after Koko Taylor. Video below if you don't know who that is. She's a woman. She's a ball of fire. She can change old to new. Also got a three-pack of mags from CZ-USA store and scored some ammo, but not much. More on order.
Meet Koko. She's still filthy from our date/workout earlier today. But it's good filth.
(https://dl.dropboxusercontent.com/u/17664131/DSC01961small.jpg)
(https://dl.dropboxusercontent.com/u/17664131/DSC01963small.jpg)
Shot 80 rounds today. Distance at about 7 yards. First target (annotated) was American Eagle 115 GR FMJ. Second target was 10 rounds SA as fast as the range allows (minimum 1 second between shots) of Speer +P 125 GR GDHP. The 7-ring is 3 inches. I do need a bit of work on my skillset to get where I used to be with the revolver and where I want to be again. That was also evident with the 586. My eyesight isn't what it was 19 years ago either. Must say that I love this CZ trigger. I did well over 500 dry fires both DA and SA into an old foam earplug blocking the firing pin last night, that was after a good cleaning and lubing up with moly. MY GOD the magazines were a GREASY MESS. Used hot water and dish soap to scrub it all out and then applied super-lube dri-film.
(https://dl.dropboxusercontent.com/u/17664131/DSC01961small_legend.jpg)
(https://dl.dropboxusercontent.com/u/17664131/DSC01966small.jpg)
OK. I lied. The REAL first target was someone elses all shot up, but I got to my lane at the range right after the cease fire was over and the range opened up so I couldn't wait and fired four rounds at a clean spot on the old paper to see if the sights were close. BTW the factory "hit pattern data chart" shows the windage is a bit right also. Elevation seems pretty much right on at 7 yards though for both types of ammo.
Koko Taylor, RIP
http://www.youtube.com/watch?v=UPh3zHwvGck (http://www.youtube.com/watch?v=UPh3zHwvGck)
-
my cz75b stainless with stream light TLR-1 HL and rail adapter.
(http://i201.photobucket.com/albums/aa46/pibool6553/df04b158-1f9f-4216-af37-01177a0205c9.jpg) (http://s201.photobucket.com/user/pibool6553/media/df04b158-1f9f-4216-af37-01177a0205c9.jpg.html)
-
Welcome to the Forum T2K
I love the looks of the Limited
The contrast between the Polish and the Matte is just too cool
Very nice
-
Just figured I'd post some pictures of mine. Just got her back from Cajun Gun Works. Only have these "dirty girl" pictures from the end of a range day. Performed flawlessly.
(http://i77.photobucket.com/albums/j45/sigthusiast/CZ75b%20Stainless/WP_20140327_16_42_08_Pro.jpg) (http://s77.photobucket.com/user/sigthusiast/media/CZ75b%20Stainless/WP_20140327_16_42_08_Pro.jpg.html)
(http://i77.photobucket.com/albums/j45/sigthusiast/CZ75b%20Stainless/WP_20140327_16_42_30_Pro.jpg) (http://s77.photobucket.com/user/sigthusiast/media/CZ75b%20Stainless/WP_20140327_16_42_30_Pro.jpg.html)
(http://i77.photobucket.com/albums/j45/sigthusiast/CZ75b%20Stainless/WP_20140327_16_43_45_Pro.jpg) (http://s77.photobucket.com/user/sigthusiast/media/CZ75b%20Stainless/WP_20140327_16_43_45_Pro.jpg.html)
(http://i77.photobucket.com/albums/j45/sigthusiast/CZ75b%20Stainless/WP_20140327_16_43_00_Pro.jpg) (http://s77.photobucket.com/user/sigthusiast/media/CZ75b%20Stainless/WP_20140327_16_43_00_Pro.jpg.html)
(http://i77.photobucket.com/albums/j45/sigthusiast/CZ75b%20Stainless/WP_20140327_16_42_36_Pro.jpg) (http://s77.photobucket.com/user/sigthusiast/media/CZ75b%20Stainless/WP_20140327_16_42_36_Pro.jpg.html)
-
Very nice and WELCOME SIG-t
Might that be a Model 41 my Eye spies ?
One of the few Guns that can out shoot a well tuned Kadet
Very nice indeed
-
Very nice and WELCOME SIG-t
Might that be a Model 41 my Eye spies ?
One of the few Guns that can out shoot a well tuned Kadet
Very nice indeed
Might be. ;) She does shoot very well. The only gun that I have that comes close in the accuracy department is my HS Victor. And it's not enough that I could measure the difference. Just never thought it would cost me as much to shoot them as my centerfires... :-[
-
new update (http://i201.photobucket.com/albums/aa46/pibool6553/20140807_123547.jpg)
-
new update (http://i201.photobucket.com/albums/aa46/pibool6553/20140807_123547.jpg)
Beautiful! !
-
Beautiful guns
-
This pic doesn't do it any justice. But I was really excited about this mod, so I had to get a quick and dirty pic from my phone's camera.
It's not my original idea, found it on official CZUB facebook page, not CZUSA's maybe it's there too, idk. But anyways, I felt I just had to have one of my own.
Thanks to 75Plus(Joe) on the mag baseplates. They just finish off the look that I was going for quite nicely.
(http://imagizer.imageshack.us/v2/800x600q90/540/Jly2JO.jpg)
-
My Xmas shopping list has increased having read through this thread!!! New grips for my stainless are the top item!
-
Welcome to the Forum, Likes
Beautiful Pistola you have there
You've added some sweet touches on 'er
AND YES, Joe is the MAN 8)
-
Thanks to 75Plus(Joe) on the mag baseplates. They just finish off the look that I was going for quite nicely.
Actually Verndog made the plates with the CZ logo. I just married them to the 10 round mags that California seems to like.
Joe
-
(http://tapatalk.imageshack.com/v2/14/12/08/17bbc669b669b51fab36d1118b72cbb7.jpg)(http://tapatalk.imageshack.com/v2/14/12/08/d1e26151895fc7669f23e4408de03e48.jpg)(http://tapatalk.imageshack.com/v2/14/12/08/3df08e9284548bda2265b8956d388a32.jpg)
Some pics of my new CZ75B SS with added SS mag plate. Last pic with big brother CZ97B in Glossy Blue
-
actvisner, very nice!
-
(http://tapatalk.imageshack.com/v2/14/12/08/17bbc669b669b51fab36d1118b72cbb7.jpg)(http://tapatalk.imageshack.com/v2/14/12/08/d1e26151895fc7669f23e4408de03e48.jpg)(http://tapatalk.imageshack.com/v2/14/12/08/3df08e9284548bda2265b8956d388a32.jpg)
Some pics of my new CZ75B SS with added SS mag plate. Last pic with big brother CZ97B in Glossy Blue
I am Easy CZ and I approve of these awesome pistolas. Wow.
Sent from my iPhone using Tapatalk
-
The Matte Stainless
(http://tapatalk.imageshack.com/v2/14/12/11/6dbfb342699b2e627e6fae60a40c87a9.jpg)
All the kids together.
(http://tapatalk.imageshack.com/v2/14/12/11/f19e8b6fbe1068361e0755360446fb82.jpg)
-
Just picked up this Stainless LE to use occasionally in IDPA (SSP) and USPSA (Production). My primary game guns are Tanfoglios, but after buying a P-07 for concealed carry, I decided I needed another CZ. The two-tone finish on the LE blew me away when I first saw it and knew I had to have it. 8)
(http://www.brazeauracing.com/firearms/cz75BSSLE_01.jpg)
(http://www.brazeauracing.com/firearms/cz75BSSLE_02.jpg)
(http://www.brazeauracing.com/firearms/cz75BSSLE_holstered.jpg)
-
IMHO, the two tone finish on the LE and New Edition are just about the best finish combination on a CZ and must be seen in person to be appreciated. It's certainly more attractive to me than say, scrollwork on some special editions. Congrats on the LE.
-
IMHO, the two tone finish on the LE and New Edition are just about the best finish combination on a CZ and must be seen in person to be appreciated. It's certainly more attractive to me than say, scrollwork on some special editions. Congrats on the LE.
Couldn't agree more
CZ's best looking Finish
Although;
I'd love to put a Gloss Blue Upper) over High Polish SS (Frame) DuoTone together 8)
-
IMHO, the two tone finish on the LE and New Edition are just about the best finish combination on a CZ and must be seen in person to be appreciated.
+1 Not having one is the biggest hole in my CZ collection. I sure wish CZ would make them again.
-
N
-
(http://i1183.photobucket.com/albums/x475/mlazarus5388/library/IMGP3005_zpsdf282f86.jpg) (http://s1183.photobucket.com/user/mlazarus5388/media/library/IMGP3005_zpsdf282f86.jpg.html)
(http://i1183.photobucket.com/albums/x475/mlazarus5388/library/IMGP3007_zpsc4ea4e70.jpg) (http://s1183.photobucket.com/user/mlazarus5388/media/library/IMGP3007_zpsc4ea4e70.jpg.html)
-
Very nice M
Now you need a B-SA Slide Stop too 8)
-
My baby
(http://i.imgur.com/urA7RM9.jpg)
Going to get some VZ tactical diamonds and do some polishing.
-
Nice pic thread it is making me want my 2nd CZ! I think it may be stainless too! My first is SP01 that I worked up with Cajun Gun parts for USPSA Production can't wait until summer to try it out.
-
More pics of my East European babe...
(http://tapatalk.imageshack.com/v2/15/01/24/50f4d88a6205ee7e28bcde3d3c367263.jpg)
(http://tapatalk.imageshack.com/v2/15/01/24/6321f13aa08f60717afe0737968419a9.jpg)
(http://tapatalk.imageshack.com/v2/15/01/24/2eefbd13b27c2e41880d3961126f469e.jpg)
Sent from my iPhone using Tapatalk
-
SWEET ECZ, Very sweet
-
IMHO, the two tone finish on the LE and New Edition are just about the best finish combination on a CZ and must be seen in person to be appreciated. It's certainly more attractive to me than say, scrollwork on some special editions. Congrats on the LE.
+1 what he said
-
SWEET ECZ, Very sweet
Thank you, sir.
Sent from my iPhone using Tapatalk
-
In this thread I have seen some amazing guns. Congratulations to all of you for your dedication in maintaining the highest standards.
Quick question for those with stainless polished and satin finish. How difficult is it to convert the parts from Matt black to a polished finish?
Andrew
-
The Matte Black / Polycoat is NOT on Stainless metal
Some are "White Steel" and some are Aloy
If you "buff" the Polycoat off, you'll have to Blue it, have it Case Harded, Nickel Plated or Hard Chromed
Or just let it rust :o
Now if you meant Matte Stainless....then just strip the Frame and Slide and Polish the #e[[ out of it 8)
-
The Matte Black / Polycoat is NOT on Stainless metal
Some are "White Steel" and some are Aloy
If you "buff" the Polycoat off, you'll have to Blue it, have it Case Harded, Nickel Plated or Hard Chromed
Or just let it rust :o
Now if you meant Matte Stainless....then just strip the Frame and Slide and Polish the #e[[ out of it 8)
What is the best way to polish it? I have access to a sandblaster in which we run silicon beads ...
-
Any pics of a Matt black with Matt Stainless slide? Just curious on how this would look!
-
(http://i1372.photobucket.com/albums/ag332/steven_moore6/IMG_0327_zpsmmf27on6.jpg) (http://s1372.photobucket.com/user/steven_moore6/media/IMG_0327_zpsmmf27on6.jpg.html)
First outing at the range. Shot great. Had trouble with Corbon hollow points not going into battery. Second trip shot a box of WWB with several FTE. Ammo was weak and dirty.
-
(http://i1372.photobucket.com/albums/ag332/steven_moore6/FullSizeRender_zpscldmjr9v.jpg) (http://s1372.photobucket.com/user/steven_moore6/media/FullSizeRender_zpscldmjr9v.jpg.html)
-
Nice looking pistol.
Second trip shot a box of WWB with several FTE. Ammo was weak and dirty.
What else were you shooting that you're comparing it to (the weak part, not the dirty part)?
-
Winchester white box was weak and dirty. Shot some re manufactured ammo from freedom munitions that worked flawless.
-
My personal experience is that WWB, Federal American Eagle, Remington UMC, Speer Lawman and CCI Blazer Brass are all about the same when it comes to their power. I think of them as regular power loads. Italian Fiocchi and Geco have a little more power. All of my CZ's will run with any of them except my CZ 75B SA which sometimes has trouble with the regular power loads. It's likely because of the heavier slide or the recoil spring.
-
My shooting buddy said that the freedom munitions ammo was kicking out several feet upon ejection, but the WWB was barely popping out. It was that 100 value pack I picked up at Academy sports. I read on several blogs that others have had trouble with this value pack. I bought some Aguila and Remington UMC to try out next time.
-
I originally planned on replacing the grips with the fancy CZ wood grips, but these rubber grips are sooo comfortable. I think I am just going to leave them on....
-
I bought some Aguila and Remington UMC to try out next time.
Do keep us informed about how they compare.
-
Any pics of a Matt black with Matt Stainless slide? Just curious on how this would look!
I went the other way
Matte Black over Matte / Brushed Stainless:
(http://i1108.photobucket.com/albums/h414/denstinettm14/CZs/0127151905a_zps602f224e.jpg)
-
What is the best way to polish it? I have access to a sandblaster in which we run silicon beads ...
The Media Blaster would be a great way to remove the PolyCoat and leave a nice Matte Finish on the Stainless
A Buffing Wheel works well to bring out a high polished finish
Personally, I used Cratex Tips on my Dremel Tool to polish my Stainless Frame before I "brush" finished it
-
Here's my matte stainless. Along with my SIG P226 Elite Stainless they are my favorite all steel 9mm pistols! Superbly accurate, nice trigger, ergonomic, reliable, and great looks. An all around great pistol. I only wish it had come with night sights like my SIG did.
(http://i2.photobucket.com/albums/y48/dtech114/Firearms/CZ-Mattestainless2_zps4a95dd0c.jpg) (http://s2.photobucket.com/user/dtech114/media/Firearms/CZ-Mattestainless2_zps4a95dd0c.jpg.html)
-
Here's my matte stainless pistol. I've added a Dawson front fiber optic sight and replaced the stock rubber grips for a Hogue one piece rubber grip. Both are a big help to me. I can see the fiber optic sight much better and the Hogue grip fits my hand a lot better.
(http://xtrooper.net/CZ_75_B_1_1200.jpg)
-
Just joined the SS club today :).
(http://i690.photobucket.com/albums/vv265/THEPATRIOT-X/SS%20CZ75B_zpsakq1bnx1.jpg) (http://s690.photobucket.com/user/THEPATRIOT-X/media/SS%20CZ75B_zpsakq1bnx1.jpg.html)
-
Truly beautiful, GAP
-
Truly beautiful, GAP
Thanks, just needs some nice grips and leather now... :)
-
Thanks, just needs some nice grips and leather now... :)
And some Stainless Mag Base Plates
Contact Joe(75plus) and get (at least) one:
(http://i944.photobucket.com/albums/ad289/AlveyJoe/Base%20Plates/FlatRadiused.jpg)
http://www.czfirearms.us/index.php?topic=25806.msg433549#msg433549
-
Thanks, just needs some nice grips and leather now... :)
And some Stainless Mag Base Plates
Contact Joe(75plus) and get (at least) one:
(http://i944.photobucket.com/albums/ad289/AlveyJoe/Base%20Plates/FlatRadiused.jpg)
http://www.czfirearms.us/index.php?topic=25806.msg433549#msg433549
Oh boy, I do NEED one or two of those as well... ;D
-
Has anyone received their CZ75B SS with machine marks on the slide release? Below are my before and after pics. Small files and a little elbow grease(http://images.tapatalk-cdn.com/15/06/02/2f5cd6ca5bb119d66ff16d3f4355b703.jpg)
(http://images.tapatalk-cdn.com/15/06/02/b535039b634ebe02ac32ba0230c0ad00.jpg)
-
You did a phenomenal job using a set of Files
You can also run a Dremel with Cratex Polishing Tips to get out all imperfections
-
Thanks. Used files, 2500 grit sandpaper then Mother's compound.
-
Do all the stainless models have the extended beavertail?
-
Do all the stainless models have the extended beavertail?
Short answer....No
But most of the newer models do though
-
Where do I find that rainbow TI coating for the controls?
-
Well I thought since I'm new to this forum I might as well contribute to the picture madness. Here's an older pic of my two CZs. The SP01 I've done more blinging up and CGWs upgrades (with race hammer, etc.), but haven't touched up the 75b stainless yet... though it's only a matter of time =).
(http://oi61.tinypic.com/35lw9ky.jpg)
-
Very nice duo! Tell us more about those grips.
-
Why thank you. Those are actually Hogue pearlite grips that I got custom laser etching from gungrips.net (though CZ is not listed there, they were nice enough to still etch the grips for me).
The stainless Chinese character is "dragon" (because my daughter is born in the year of the dragon, plus a dragon is always bada$$). There's actually different characters on the other side, but the SP01 characters, when combined, is "bright".
-
Very VERY nice !
-
Here is the CZ75B I pictured above except now it has the Coco Bolo half checker grips.
(http://images.tapatalk-cdn.com/15/08/19/4fc9cdea40f37915d4be8e62a8769a99.jpg)
Sent from my SM-G900T using Tapatalk
-
Just for fun I swapped my stainless slide on my polished 75B frame for my Accu Shadowed CZC modified TS slide with the Delta Point red dot.
(http://i20.photobucket.com/albums/b250/caliSTi/Firearms/EA2F4D37-9752-4D52-991E-F34FCB816AFB_zpsnmxzjow7.jpg) (http://s20.photobucket.com/user/caliSTi/media/Firearms/EA2F4D37-9752-4D52-991E-F34FCB816AFB_zpsnmxzjow7.jpg.html)
-
I love it
Did this with a Matte (now brushed) Stainless Lower under Polycoat Semi-Compact Upper
Added Poly Controls, Trigger and Hammer to create my DuoTone Semi Compact
Always thought a Polished Lower under a Bright Blue Upper would make the ultimate DuoTone though
-
very happy to[finally] be in this club. I stumbled across this on my day off work and couldn't resist. FO front sight and rear tactical are also on the way. going to have my LGS install those along with the spring kit from CGW. dated 08.
(http://i1274.photobucket.com/albums/y436/puddintame/CIMG3212_zpsudjqsfmx.jpg) (http://s1274.photobucket.com/user/puddintame/media/CIMG3212_zpsudjqsfmx.jpg.html)
-
Looks great Puddintame
All that's missing is a set of Stainless Torx or Hex Grip Screws
http://czscrews.angelfire.com/
-
My matte stainless 75B should be ready to pick up in a couple of weeks so I haven't handled it yet.
But I have a quick question; do the current matte stainless 75B's come with magazines that are stainless, chrome, or blued?
-
Mine are blued. Gun was manufactured earlier this year
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Mine are blued. Gun was manufactured earlier this year
Sent from my SAMSUNG-SM-N900A using Tapatalk
Ahh, thanks. I would have assumed that the stainless would come with chrome mags, but I am obviously wrong.
Even though I won't be picking mine up for a couple of weeks, I know I'll want spare magazines for it, so I've already ordered 3 of the 16-round in chrome and then 3 of the 18-round in blue.
-
Carter:
Welcome to the Forum and congrats on your new CZ
PM Joe (75plus) and ask if he still makes his Stainless Mag Bases in Matte too
Even one would be nice, even just for show 8)
http://www.czfirearms.us/index.php?topic=25806.msg136327#msg136327
-
Truly loved the looks of mine but decided a 75BD was more atuned to my needs so it is on consignment at the LGS and a black 75BD on order
Wish they made a 75BD in stainless
Don't know why they didn't
(http://bandb3536.com/firearms/cz75l.jpg)
-
Took some cool pics on my Stainless today. Thought I'd bring this thread back to the top!
75B Stainless polished:
(http://i.imgur.com/yZj3Qdn.jpg)
(http://i.imgur.com/1NZjEnl.jpg)
Details: CGW's EZ Drift sights, ring hammer, bushing, sear, disco, trigger pin, springs, grip screws. CZUB grips, extended firing pin. ppdbillet base pad. Work done by me.
-
That is truly beautiful, HW
-
This was my matte stainless until about two weeks ago when I sold it to a friend. I replaced it with a high polish stainless. I'll post a photo of that one once I figure out what grips to put on it.
(http://i433.photobucket.com/albums/qq59/88E30M50/Mechanical%20Things/20170227_194753_zpsfu8djkt4.jpg) (http://s433.photobucket.com/user/88E30M50/media/Mechanical%20Things/20170227_194753_zpsfu8djkt4.jpg.html)
-
That is truly beautiful, HW
Thanks!
This was my matte stainless until about two weeks ago when I sold it to a friend. I replaced it with a high polish stainless. I'll post a photo of that one once I figure out what grips to put on it.
(http://i433.photobucket.com/albums/qq59/88E30M50/Mechanical%20Things/20170227_194753_zpsfu8djkt4.jpg) (http://s433.photobucket.com/user/88E30M50/media/Mechanical%20Things/20170227_194753_zpsfu8djkt4.jpg.html)
Great pistol. Good luck with your lighting on the polished, they are hard to capture on film! (or memory card?) 8)
-
My original Matte Stainless mags are now NP3'd. The color is almost perfect. One of these days I'll check if photobucket is usable again or dig up my name and password for that hunting site that hosts images or maybe give in to tapatalk that lets you share images from a tablet as some have pointed out.
-
I been away for a while... don't ask 8)
Thought I would share some new projects... starting with my 75B-SA (Polished Black) that's waiting on its AAC Ti-Rant 9M
(https://www.dropbox.com/s/b8cb7pmhpgokhrw/2017-05-02%2015.15.42.jpg?raw=1)
-
Mine with some friends(https://uploads.tapatalk-cdn.com/20170505/f8eb6c316c5636ff0d005cf7e3e75ab7.jpg)
Sent from my iPhone using Tapatalk
-
Took out my 75B Matte Stainless yesterday along with my VP9. Living in CA these are almost impossible to find. I got lucky on both pistols.
On a side note, my test Target is the best I've seen. Lol
(http://i1158.photobucket.com/albums/p603/jdmquipas2/94C70529-8C29-4D8E-9D6F-2B77DE5E538D_zpsxcqxwzm5.jpg)
(http://i1158.photobucket.com/albums/p603/jdmquipas2/DAFF1CA3-8E99-4742-95F1-19570700C32C_zpskiw0bpzz.jpg)
(http://i1158.photobucket.com/albums/p603/jdmquipas2/8006BE8E-424D-4F6F-BF5F-C8AE90199329_zpsebrf8xnf.jpg)
-
Here is my CZ75B 75th Anniversary pistol with the eagle grips. 16 of 75. A rare bird!
It is SS. (https://uploads.tapatalk-cdn.com/20170506/7f8906f66f4a631de9846f72811db7c6.jpg)
Sent from my SM-G935T using Tapatalk
-
My High Polish as it was purchased new, except for the stainless grip screws.
(http://i65.tinypic.com/2ekk4zq.jpg)
-
Here is my CZ75B 75th Anniversary pistol with the eagle grips. 16 of 75. A rare bird!
It is SS. (https://uploads.tapatalk-cdn.com/20170506/7f8906f66f4a631de9846f72811db7c6.jpg)
Sent from my SM-G935T using Tapatalk
Okay, still jealous of this one......the grips are original, correct?
-
Here is my CZ75B 75th Anniversary pistol with the eagle grips. 16 of 75. A rare bird!
It is SS. (https://uploads.tapatalk-cdn.com/20170506/7f8906f66f4a631de9846f72811db7c6.jpg)
Sent from my SM-G935T using Tapatalk
Okay, still jealous of this one......the grips are original, correct?
Yes, the grips are original. That is how this edition leaves the factory.
Sent from my SM-G935T using Tapatalk
-
Okay I have to say this stainless thread is inspiring, I've owned many CZ's over the years but never a stainless one. I went through all 28 pages of this thread and can really appreciate each and every one of them.....the one I'm most drawn to is the polished version, they really POP!!! My question to those of you that have experience shooting the polished ones is this...is there too much glare/shine off the slide when shooting them outdoors. I've owned some stainless barreled rifles that were a bit too reflective, almost irritating after shooting for a while. Any feedback is appreciated 8)
-
The CZ75 looks great in any format. The polished SS CZ's look like a piece of Jewelry.
-
I love how they are all similar, but tweaked to the owners liking, great looking guns guys.
-
Just picked up this Stainless LE to use occasionally in IDPA (SSP) and USPSA (Production). My primary game guns are Tanfoglios, but after buying a P-07 for concealed carry, I decided I needed another CZ. The two-tone finish on the LE blew me away when I first saw it and knew I had to have it. 8)
(http://www.brazeauracing.com/firearms/cz75BSSLE_01.jpg)
(http://www.brazeauracing.com/firearms/cz75BSSLE_02.jpg)
(http://www.brazeauracing.com/firearms/cz75BSSLE_holstered.jpg)
What grip tape is that?
-
I guess a group like that doesn't need an image showing the the mean POI!!! 8)
Took out my 75B Matte Stainless yesterday along with my VP9. Living in CA these are almost impossible to find. I got lucky on both pistols.
On a side note, my test Target is the best I've seen. Lol
(http://i1158.photobucket.com/albums/p603/jdmquipas2/94C70529-8C29-4D8E-9D6F-2B77DE5E538D_zpsxcqxwzm5.jpg)
(http://i1158.photobucket.com/albums/p603/jdmquipas2/DAFF1CA3-8E99-4742-95F1-19570700C32C_zpskiw0bpzz.jpg)
(http://i1158.photobucket.com/albums/p603/jdmquipas2/8006BE8E-424D-4F6F-BF5F-C8AE90199329_zpsebrf8xnf.jpg)
-
Here is my contribution along with one of my favorite knives ( Boker Custom Auto w/Abalone inlays, High polished blade and file work on spine ).
(http://i789.photobucket.com/albums/yy175/9foxfield/P1010843_zpsbkjrm4r4.jpg) (http://s789.photobucket.com/user/9foxfield/media/P1010843_zpsbkjrm4r4.jpg.html)
-
Beautiful. Take another picture with the Matte's Abolone inlaid grips! Please!
-
Here's my 2014. Just bought it used in really great shape. Added the stainless base-plate and LOK grips. I like.
(http://i65.tinypic.com/acty4x.jpg)
(http://i67.tinypic.com/14metkj.jpg)
-
Looks GREAT ............... where do the stainless magazine base plates come from?
-
Thanks. I bought them awhile back. Somewhere earlier in this thread it mentions them. Sorry, I just don't recall. I think the member's name is 75Plus.
-
Thanks. I bought them awhile back. Somewhere earlier in this thread it mentions them. Sorry, I just don't recall. I think the member's name is 75Plus.
Yeah, PM Joe (75Plus) or you can also check-out this guy:
http://www.ppdbillet.com/CZ_75_Base_Plate.htm
-
Here is my 75b along with a great tanfoglio in 2 tone. Both are great guns!
Sorry don't know how to post the pic so just a link..
http://s1299.photobucket.com/user/h8louzn/media/IMG_20170605_193532459_zpsjdnziipl.jpg.html?sort=3&o=0
-
I'll help keep the thread going with a new CZ Custom stainless 75b:
(https://www.taurusarmed.net/forums/attachments/other-handguns/424891d1536876659-show-off-your-other-handguns-001.jpg)
-
(https://i.imgur.com/XnQyBQD.jpg?1)
-
(https://i.imgur.com/uEgMHsW.jpg[)
-
(https://preview.ibb.co/bKefZ9/C617119_F_23_DB_42_DE_B495_30949112325_C.jpg) (https://ibb.co/d7f9SU)
(https://preview.ibb.co/d4MG7U/E174_AD87_02_AB_4_C94_B9_C3_B7_B3537663_B7.jpg) (https://ibb.co/fcxpSU)
The stock rubber grips are fantastic, but I?ll still likely change them out to complete the look. Just brought her home today.
-
Just picked up the Limited Edition yesterday. Now I need some Stainless magazine baseplates.
(https://i.imgur.com/TAysbnD.jpg)
-
I couldn't pass up a good deal on another polished stainless CZ 75b.
(https://www.taurusarmed.net/forums/attachments/other-handguns/427633d1540511161-performance-range-report-cz-custom-polished-stainless-75b-003.jpg)
(https://www.taurusarmed.net/forums/attachments/other-handguns/427635d1540511190-performance-range-report-cz-custom-polished-stainless-75b-004.jpg)
-
Gorgeous!!!
-
Forgot to add a few once the Lok?s & Base Plates from Joe (75Plus) arrived to the thread
(https://preview.ibb.co/hR1o5q/397-E7851-8-ACE-4691-9-BE1-79-D07-F6-A76-A0.jpg) (https://ibb.co/eygo5q)
(https://preview.ibb.co/hhteBV/751-AF589-901-E-441-D-BCF6-42-E2-AD4-BA879.jpg) (https://ibb.co/f9H6rV)
(https://preview.ibb.co/mCBhWV/A55-EEE52-6-F3-D-4-F89-8-E6-E-E42-EB18-D7289.jpg) (https://ibb.co/kfa9BV)
(https://preview.ibb.co/ngVy5q/5-C84-C767-C4-C5-4823-980-F-E2-D429-BB9598.jpg) (https://ibb.co/iUbudA)
(https://aluminumsulfate.net/ammonium-sulfate)
-
Not sure if anyone still looks at this, but here’s mine.
(https://i.imgur.com/XSlouGq.jpg)
(https://i.imgur.com/XSlouGq.jpg)
(https://i.imgur.com/i7GURod.jpg)
(https://i.imgur.com/i7GURod.jpg)
-
https://www.youtube.com/watch?v=UvwVgIoMjTI&feature=emb_logo
-
We are still looking at it Branden0687. Nice looking CZs, thank you for the pics.
-
SP-01 Stainless?
I forget what site or Facebook feed I pulled this picture off of. I guess the guy is on Instagram or Twitter, and I do neither.
Have any of you seen a stainless SP-01, or is this some kind of cerakote voodoo?
(https://uploads.tapatalk-cdn.com/20200623/73388ac03a5d93db456225c02ba7d93a.jpg)
Sent from my iPad using Tapatalk
-
And my matte stainless CZ75B.…
(https://uploads.tapatalk-cdn.com/20200623/1b40ad0acfcdee7c1398e8d9d08ef9ab.jpg)
New holster I received today.…
(https://uploads.tapatalk-cdn.com/20200623/cfd0aa1becff4966f85988229d49308a.jpg)
Sent from my iPad using Tapatalk
-
SP-01 Stainless?
I forget what site or Facebook feed I pulled this picture off of. I guess the guy is on Instagram or Twitter, and I do neither.
Have any of you seen a stainless SP-01, or is this some kind of cerakote voodoo?
Sent from my iPad using Tapatalk
It is likely to be a Hard Chrome refinish, witch looks allot like matte stainless. To my knowledge CZ has never made a stainless SP-01 or SP-01 Shadow but there are refinished Hard Chrome instances of just about every CZ model.
-
Just read all 30 pages of this thread. What great pictures, variation and workmanship! All I can think is, "one more week, one more week..."
-
SP-01 Stainless?
I forget what site or Facebook feed I pulled this picture off of. I guess the guy is on Instagram or Twitter, and I do neither.
Have any of you seen a stainless SP-01, or is this some kind of cerakote voodoo?
Sent from my iPad using Tapatalk
It is likely to be a Hard Chrome refinish, witch looks allot like matte stainless. To my knowledge CZ has never made a stainless SP-01 or SP-01 Shadow but there are refinished Hard Chrome instances of just about every CZ model.
Could also be np3 finish?
Sent from my SM-A205U using Tapatalk
-
And my matte stainless CZ75B.…
(https://uploads.tapatalk-cdn.com/20200623/1b40ad0acfcdee7c1398e8d9d08ef9ab.jpg)
New holster I received today.…
(https://uploads.tapatalk-cdn.com/20200623/cfd0aa1becff4966f85988229d49308a.jpg)
Sent from my iPad using Tapatalk
SoloScuba - what holster is that?
-
I am having a Nickel Boron High Polish being made right now
-
I have a Pre B Blued 75 with OP's Grips on it. Very Clean gun.
-
(https://i.imgur.com/hQWKLpi.jpg)
Pretty stock looking, but Cajun magic
-
One of a kind Nickel Boron Bright High Polish by Ron Mahovsky (http://www.mahovskysmetalife.com/)
I highly recommend his work, his daughter Kim advised I do this finish.
(https://i.ibb.co/72VGP8M/IMG-7271.jpg)
(https://i.ibb.co/Cw4QkCV/IMG-7274.jpg)
(https://i.ibb.co/G72RnBT/IMG-7275.jpg)
(https://i.ibb.co/BwbSqdh/IMG-7277.jpg)
(https://i.ibb.co/WF7JPz2/IMG-7278-edit.jpg)
-
One of a kind Nickel Boron Bright High Polish by Ron Mahovsky (http://www.mahovskysmetalife.com/)
I highly recommend his work, his daughter Kim advised I do this finish.
(https://i.ibb.co/72VGP8M/IMG-7271.jpg)
(https://i.ibb.co/Cw4QkCV/IMG-7274.jpg)
(https://i.ibb.co/G72RnBT/IMG-7275.jpg)
(https://i.ibb.co/BwbSqdh/IMG-7277.jpg)
(https://i.ibb.co/WF7JPz2/IMG-7278-edit.jpg)
Doesn't look like Stainless to me.
-
This was sitting on my desk:
(https://i.imgur.com/EiclskI.jpg)
-
The above grips are of true Cocobolo wood.
One can identify true Cocobolo wood by that specific browny-red chestnut color and the depth and figure and inherent beauty of the grain. Good examples of Cocobolo are getting scarce in today's profit-generated world and the best of them are commanding higher and higher prices. As such in cost-cutting measures, fake impostor woods of similar-appearance and sources of lesser quality Cocobolo are becoming popular and ubiquitous.
Padauk wood is the most prominent source of fake Cocobolo and is now being slyly introduced as true "Cocobolo", under the legal loophole that "Cocobolo" by definition is just an "appearance" similar to true Cocobolo wood and as such, is a fully-legal label as nobody can patent a species per se.
For proof of this assertion, just look at the majority of SS CZ-75B grips pictured on the internet labelled as Cocobolo wood. The vast majority are of the half-checkered "Cocobolo" variety of Padauk, the much more purple-red coloured wood, the current Chinese impostor and leader in the extinction of true Cocobolo.
Padauk is much cheaper to produce and thus profits are huge and really, the gaudy color is not worthy of our guns.
So in seeking the right look of Cocobolo grips for your prized CZ-75B of polished SS or not, do your homework as a consumer. A set of grips that are way too orange or too purple or red are not the true Cocobolo wood - labelled as such or not - that truly complements the look of of your prized CZ-75B.
-
Perhaps if the introduction of the term "FauxCobolo" were introduced, it might defuse the gap between the hapless buyers' disappointment in their uninformed purchase and that MAYBE unscrupulous sellers potentially conflicted by moral hazard in "unintentionally misrepresenting" their products in the gas-lit hope that their consumers will not notice and buck up for a lesser product and the sense of a better deal masked as a lower price anyway.
-
Nickel vs Stainless(https://uploads.tapatalk-cdn.com/20211224/dc6e2c12385685e0f015496da3094eea.jpg)(https://uploads.tapatalk-cdn.com/20211224/70252374b32b5b0338d94d66344f1dd0.jpg)
Sent from my SM-G996U1 using Tapatalk