The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: golfneat on February 11, 2018, 12:47:02 AM
-
I got a nice cheat for the CZ P10C mags. Not sure others know this so here goes. The Vickers Tactical baseplates for the SW M&P fit the CZ mags perfectly. They are awesome. $21 for 5 off of websites. Just wanted everyone to know they work and are awesome.
-
Thanks for the info. It will come in handy.
-
Thanks for that!!
Sent from my SM-G900P using Tapatalk
-
Good info, has any one tried any othe base pads like the Taran extensions for m&p on cz mags
Sent from my iPhone using Tapatalk
-
Thanks for the heads up.
-
Any malfunctions? Gotta look into this.
-
What do they look like? I suppose they offer an advantage stripping a stuck mag? (Might be OK for P07/09 use also).
-
I decided to try swapping mag baseplates from my CZ P10C and my M&P full size and they were swappable with both fitting each other no problem. More interesting though was when I compared Magazine springs between the two models. Both Magazine springs were about the same length, with the CZ having one more coil. I'd almost bet that the M&P spring would work in the CZ magazine. Maybe this would give P10 owners another option for mag springs if others are hard to source. I'm not saying that is a problem, just that it's just good to have options.
(https://farm5.staticflickr.com/4710/26352990108_3c1d2a670a_z_d.jpg)
-
What do they look like? I suppose they offer an advantage stripping a stuck mag? (Might be OK for P07/09 use also).
What dd the BASES look like ON THE p10c? Tried the MP base plate on the P07 last night and it sticks out a ton in the front. Do the Vcicker's bases look the same?
-
What do they look like? I suppose they offer an advantage stripping a stuck mag? (Might be OK for P07/09 use also).
What dd the BASES look like ON THE p10c? Tried the MP base plate on the P07 last night and it sticks out a ton in the front. Do the Vcicker's bases look the same?
This is what a stock M&P baseplate looks like on the CZ mag in the P10C. Note the gap between the grip and baseplate. Second pic is with CZ stock baseplate. I'm guessing dimensionally the M&P stock baseplate is very similar to the Vickers one.
(https://farm5.staticflickr.com/4770/25369888787_8cca0204cd_z_d.jpg)
(https://farm5.staticflickr.com/4670/40208098532_69e15f30cd_z_d.jpg)
-
Thank you sir - that helps a bunch. Truth is that the P10C mag base does not fit the P07 exactly, and CZ does not sell the REGULAR P07 bases.
-
I took a few screen shots of a YouTube video of a guy putting on the Vickers base plate for the M&P. There's a lot bigger gap similar to above. Not my cup of tea.
He mentions the Vickers Glock base plates fit but says he can't source the base plate retainers. They're easy to find so I'm curious what they'd look like.
(https://uploads.tapatalk-cdn.com/20180215/5a9098d2ae706a013a4764672cefd217.jpg)
(https://uploads.tapatalk-cdn.com/20180215/806c4f7e4d3d081e06f893903eb77547.jpg)
https://youtu.be/HUDV_k6k-bc
-
I took a few screen shots of a YouTube video of a guy putting on the Vickers base plate for the M&P. There's a lot bigger gap similar to above. Not my cup of tea.
He mentions the Vickers Glock base plates fit but says he can't source the base plate retainers. They're easy to find so I'm curious what they'd look like.
(https://uploads.tapatalk-cdn.com/20180215/5a9098d2ae706a013a4764672cefd217.jpg)
(https://uploads.tapatalk-cdn.com/20180215/806c4f7e4d3d081e06f893903eb77547.jpg)
https://youtu.be/HUDV_k6k-bc
Thanks for sharing.
-
I wonder if these would fit any better?
Apex 10-8 Performance M&P Base Pads - 4 Pack
https://store.apextactical.com/WebDirect/Products/Details/191988
-
I wonder if these would fit any better?
Apex 10-8 Performance M&P Base Pads - 4 Pack
https://store.apextactical.com/WebDirect/Products/Details/191988
Gap will be the same.
-
I wonder if these would fit any better?
Apex 10-8 Performance M&P Base Pads - 4 Pack
https://store.apextactical.com/WebDirect/Products/Details/191988
Gap will be the same.
Maybe or maybe not. It depends if the Apex improve on the gap that already exists on the M&P.
Some of the M&P factory fit are worse than others.
(https://uploads.tapatalk-cdn.com/20180218/3294baae69dca23a9268273ae258e028.jpg)
(https://uploads.tapatalk-cdn.com/20180218/69d7bcff2ae986c111372cff66390727.jpg)
(https://uploads.tapatalk-cdn.com/20180218/9c87567db9dc2fdc0dd1b8c623b1c23d.jpg)
-
Looking at the pic I took of the M&P baseplate on the CZ magazine, the gap is significant. The gap is almost half as thick as the baseplate.
-
Looking at the pic I took of the M&P baseplate on the CZ magazine, the gap is significant. The gap is almost half as thick as the baseplate.
Just like the gap is almost half as thick as the plate on the first two stock M&P photos I posted.
(https://uploads.tapatalk-cdn.com/20180218/414374010582d3f9f19dc4c137736ca4.jpg)
All I'm suggesting is the tolerances *could* vary enough to matter to some people that it would or wouldn't be an issue. I'm willing to admit more than likely I'm wrong, but until we see the Apex actually installed on a CZ mag, it's hard to say.
If you noticed the pictures I just posted, the M&P base plate fit varies *a lot* between individual samples just as the base plate gap varies between p10 samples.
Life's too short to argue on the internet.
Have a nice one.
-
Not trying to argue Sir. I just think the gap is so significant with the M&P baseplate on the CZ mag, that a baseplate from a different manufacturer who is making them to a similar spec isn't going to look much better. I'm not afraid to admit when I'm wrong. If I had the extra money I'd be the guinea pig, since I already own both pistols.