Author Topic: Problem with P01 Omega  (Read 519 times)

0 Members and 1 Guest are viewing this topic.

Offline marinedoc

  • Newbie
  • *
  • Posts: 9
Problem with P01 Omega
« on: October 18, 2018, 12:32:01 PM »
I was considering buying he CZ P01 Omega until I saw several people on U tube showing problem that they were having with the Po1 Omega involving the decocking mechanism resulting in failure to fire problems. This appeared to be starting in 2017 but someone posted that  they had purchased a gun in June 2018 and were still having that problem. Has CZ addressed and fixed that problem?

Online M1A4ME

  • Hero Member
  • *****
  • Posts: 4082
  • I've shot the rest, I now own the best - CZ
Re: Problem with P01 Omega
« Reply #1 on: October 18, 2018, 03:31:20 PM »
Some of the members on this forum had issues with P01 Omegas made in 2017.

I didn't realized people with pistols made in 2018 were having issues.

I use the safeties on both of mine and haven't had an issue.  It's just the decocker set up that people had problems with.

There's an 18 or 20 page thread here on it.  Just do a search.
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline del4c

  • Jr. Member
  • **
  • Posts: 36
Re: Problem with P01 Omega
« Reply #2 on: October 18, 2018, 03:48:49 PM »
Marinedoc:


When posting ,   please do your research first before putting this information out    " Failure to fire"

That was`nt the right description- do your research a little more.

Offline SI VIS PACEM PARRABELLUM

  • Hero Member
  • *****
  • Posts: 2759
Re: Problem with P01 Omega
« Reply #3 on: October 18, 2018, 07:17:59 PM »
Just buy a standard P-01 or a PCR. Best compact pistols around. Better than any striker fired S&W or block.

Offline christak

  • Full Member
  • ***
  • Posts: 111
Re: Problem with P01 Omega
« Reply #4 on: October 18, 2018, 08:06:10 PM »
I have a 2018 P-01 Omega (91229) purchased in June 2018. It's been flawless. I also have a 2017 standard P-01 (91199). It has also been flawless. I prefer the flat trigger on the Omega, but I highly recommend either one. I've never had a malfunction of any kind with any of my 4 CZs...they are wonderful handguns.

Offline bigern314

  • Newbie
  • *
  • Posts: 5
Re: Problem with P01 Omega
« Reply #5 on: October 19, 2018, 01:09:05 PM »
I have a P-01 I bought last month and no FTF or malfunctions beyond a feed failure on the first mag I ran though it. 

Offline LPRoad

  • Newbie
  • *
  • Posts: 4
Re: Problem with P01 Omega
« Reply #6 on: November 08, 2018, 02:35:08 PM »


I use the safeties on both of mine and haven't had an issue.  It's just the decocker set up that people had problems with.


I am considering a P-01 Omega as a lighter, higher capacity alternative to my edc Commander. Do you carry cocked and locked?

Online M1A4ME

  • Hero Member
  • *****
  • Posts: 4082
  • I've shot the rest, I now own the best - CZ
Re: Problem with P01 Omega
« Reply #7 on: November 08, 2018, 06:17:13 PM »


I use the safeties on both of mine and haven't had an issue.  It's just the decocker set up that people had problems with.


I am considering a P-01 Omega as a lighter, higher capacity alternative to my edc Commander. Do you carry cocked and locked?

Yes, cocked and locked, just like my 1911.  Just like the P07/P09, the Pre B CZ85, the CZ75 Compacts.  Cocked and locked.  While I do switch from one carry pistol to another (depending on where I'm going, who I'm with, etc.) they all work the same way, cocked and locked.

That's why I bought the Omega P01's instead of the older version, so I could install the thumb safeties and carry them like my Colt 1911's.
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

 

anything