Author Topic: Customers 97B Targets  (Read 1691 times)

0 Members and 1 Guest are viewing this topic.

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2861
Customers 97B Targets
« on: November 14, 2018, 08:26:31 AM »
One of our customers sent us a group of targets he shot with his 97B"E" conversion.  Customer was also using our EZ/d 97 sight set.  I'll check the distance and post.



Online Shawrco

  • Jr. Member
  • **
  • Posts: 31
Re: Customers 97B Targets
« Reply #1 on: November 14, 2018, 09:04:05 AM »
That's impressive! Was that from a rest or off hand? What load, cast or jacketed, etc? I put a reflex sight on the 97BE y'all did for me and have not shot much (it did very well though). Gives me incentive to go out and show mine again.

Sent from my XT1650 using Tapatalk


Online Joe L

  • Hero Member
  • *****
  • Posts: 5412
Re: Customers 97B Targets
« Reply #2 on: November 14, 2018, 09:11:17 AM »
I don't care how he did it--that's pretty!! 

Joe
CZ-75B 9mm and Kadet, 97B"E", two P-09's, P-07, P-10C, P-10F

Online Shawrco

  • Jr. Member
  • **
  • Posts: 31
Re: Customers 97B Targets
« Reply #3 on: November 14, 2018, 09:47:55 AM »
Agreed! Just wanted to brag on shooter even more if off hand!

Sent from my XT1650 using Tapatalk


Offline thedude

  • Full Member
  • ***
  • Posts: 347
Re: Customers 97B Targets
« Reply #4 on: November 14, 2018, 07:53:12 PM »
Those targets are impressive, David!  Does the 'E' bushing come out just like a 1911?  Does it utilize the stock 97 guide rod plug or does CGW provide their own plug? 

Offline aussie57

  • Jr. Member
  • **
  • Posts: 86
Re: Customers 97B Targets
« Reply #5 on: November 14, 2018, 09:18:40 PM »
It would be hard to complain about those groupings.

Offline gtcooper

  • Full Member
  • ***
  • Posts: 121
Re: Customers 97B Targets
« Reply #6 on: November 15, 2018, 06:49:44 AM »
Those targets are impressive, David!  Does the 'E' bushing come out just like a 1911?  Does it utilize the stock 97 guide rod plug or does CGW provide their own plug?
Reuses the stock plug.


Sent from my iPhone using Tapatalk Pro

Offline thedude

  • Full Member
  • ***
  • Posts: 347
Re: Customers 97B Targets
« Reply #7 on: November 15, 2018, 08:39:02 AM »
Looks good, does CGW crown the barrel when they do the 1911 bushing or was that extra?

Offline gtcooper

  • Full Member
  • ***
  • Posts: 121
Re: Customers 97B Targets
« Reply #8 on: November 15, 2018, 09:51:14 AM »
Looks good, does CGW crown the barrel when they do the 1911 bushing or was that extra?
Yes they do


Sent from my iPhone using Tapatalk Pro

Offline Litespeeds

  • Full Member
  • ***
  • Posts: 114
Re: Customers 97B Targets
« Reply #9 on: November 16, 2018, 10:40:29 AM »
The CZ 97B-E is no joke. It's the real deal. Here is my SAO Copperhead that I put 10 shots into a ragged hole at 10 yards freehand.  The target is 3". Amazing firearm thanks the CGW.


Offline aussie57

  • Jr. Member
  • **
  • Posts: 86
Re: Customers 97B Targets
« Reply #10 on: November 16, 2018, 05:37:33 PM »
Another on the "look at list". I want to put one in hand before I lay down $$$ but cannot find a 97 anywhere to look at.

Offline painter

  • Hero Member
  • *****
  • Posts: 5845
Re: Customers 97B Targets
« Reply #11 on: November 24, 2018, 04:48:03 PM »
I sent this pic to David several years ago. He likely forgot. It was shot by a friend, single hand at 50' indoors with his 97 BD-E. This is a timed fire target. Two 5 shot strings, in 20 seconds each. I score it a 99.  I wish I could do that.

I had the right to remain silent...

but not the ability.

Offline leelandoconner

  • Newbie
  • *
  • Posts: 2
Re: Customers 97B Targets
« Reply #12 on: February 23, 2019, 05:08:30 PM »
First 10 shots through my E-conversion. Slow fire, standing, first shot double-action, remaining single, 35ft:



https://imgur.com/QLSDxdj

Totally different gun after the conversion. I've already bought another 97b and will be sending it in for work as soon as the threaded barrel arrives.  That one will be a SAO conversion with red dot.
« Last Edit: February 23, 2019, 05:18:38 PM by leelandoconner »

Offline ejb1975

  • Jr. Member
  • **
  • Posts: 74
Re: Customers 97B Targets
« Reply #13 on: February 23, 2019, 05:26:17 PM »


I usually shoot at steel with my 97B-E, but I can tell you it is dead nuts accurate...will hang with my Dan Wesson all day.


Sent from my iPhone using Tapatalk

Offline GeneticallySwiss

  • Full Member
  • ***
  • Posts: 474
Re: Customers 97B Targets
« Reply #14 on: February 23, 2019, 08:16:17 PM »
I am tempted to send by 97BD into Cajun, but my concern is if I get the full E conversion whether or not my pistol would still be reliable enough for self defense/carry.  My concern, specifically is whether by making the 97BD tighter and undoubtedly more accurate, whether that makes it a bit more finicky feeding, or precludes the use of certain ammunition’s.

GS
"Rules are for the obedience of fools and guidance of wise men"

 - Douglas Bader -