« previous next »
Pages: [1]   Go Down

Author Topic: Issues with Decocker Reassembly ----P01  (Read 969 times)

0 Members and 1 Guest are viewing this topic.

Offline dirkdiggler

  • Jr. Member
  • **
  • Posts: 51
Issues with Decocker Reassembly ----P01
« on: January 12, 2019, 09:14:47 AM »
I've full kits on both BD and Omega decockers without any issues but my P01 is giving me hell. When I'm driving the slave pin out from left to right the lifter spring is getting knocked of position...the last 7 times I've tried.

Any secret "black magic" you guys can share would be great.
Logged

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 5254
Re: Issues with Decocker Reassembly ----P01
« Reply #1 on: January 12, 2019, 11:48:56 AM »
Never ?drive out? the slave pin. You should be able to ?push? it out. You may have to tweak the cage a little to work the pin thru.
Logged
If guns are outlawed.........
 Only outlaws will have guns.

Offline dirkdiggler

  • Jr. Member
  • **
  • Posts: 51
Re: Issues with Decocker Reassembly ----P01
« Reply #2 on: January 12, 2019, 12:38:42 PM »
Yeah poor choice of words. I have been pressing it in and out with my thumb.... vocabulary becomes limited when the blood pressure is off the charts. Finally figured it out. The slave pin that I made had a slight burr that was probably catching the spring. Another stress inducing project completely self inflicted.

Logged

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 5254
Re: Issues with Decocker Reassembly ----P01
« Reply #3 on: January 12, 2019, 02:19:45 PM »
Gotcha[emoji6] glad you got it. They can be ah,er, difficult at times to say the least.
Logged
If guns are outlawed.........
 Only outlaws will have guns.

Offline Chuck James

  • Full Member
  • ***
  • Posts: 331
Re: Issues with Decocker Reassembly ----P01
« Reply #4 on: January 13, 2019, 10:59:14 AM »
Quote from: dirkdiggler on January 12, 2019, 12:38:42 PM
Yeah poor choice of words. I have been pressing it in and out with my thumb.... vocabulary becomes limited when the blood pressure is off the charts. Finally figured it out. The slave pin that I made had a slight burr that was probably catching the spring. Another stress inducing project completely self inflicted.

I hate working on something only to find out the problems I'm having were self induced.   ;) ;)

Glad to see you worked it out.  :)
Logged
Pages: [1]   Go Up
« previous next »