Author Topic: (2) P01 projects completed....  (Read 1154 times)

0 Members and 1 Guest are viewing this topic.

Offline The Guardian

  • Full Member
  • ***
  • Posts: 277
  • CZ dreamin'... zzzzzzz..... don't wake me
(2) P01 projects completed....
« on: April 13, 2019, 02:01:45 PM »
Just got these finished up today.....did one yesterday and the other today.  Each is modified slightly different, details on each included.....

P01 OD Green

CZC Trijicon Tactical Short Night Sights (w/Gold Ring Front)
CZC Competition Hammer
Wolff 14# Recoil Spring
CGW 10X Barrel Bushing
CGW RRK (Reach Reduction Kit) w/Black Nitride Trigger
CGW Ultra-Lite Kit (13# main/hammer spring)
CGW Floating Trigger Pin
CGW Burnt Orange G10 Grips
Cool Hand CZ 75 Grip Screws
Internals Highly Polished
(2) Mecgar 15rd Mags







P01 Black

CZC Trijicon Tactical Short Night Sights (w/Gold Ring Front)
CZC Competition Hammer
Wolff 14# Recoil Spring
CGW 10X Barrel Bushing
CGW Reach Reduction Kit (RRK) w/Black Nitride Trigger
CGW Ultra-Lite Kit (13# Main/Hammer Spring)
CGW Floating Trigger Pin
Cool Hand G10 Grenade Grips
Cool Hand CZ 75 Grip Screws
Internals Highly Polished
(2) 14rd CZ Factory Mags w/Rubber Base Pads







« Last Edit: May 27, 2019, 10:31:50 PM by The Guardian »
“I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them."  John Wayne as J.B Books in "The Shootist" 1976

Offline Squonk

  • Jr. Member
  • **
  • Posts: 96
  • BANNED for being an ass
Re: (2) P01 projects completed....
« Reply #1 on: April 13, 2019, 02:47:52 PM »
Wow, very nice. The black one looks like it has a shorter trigger pull.
I was an ass and got myself banned.

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 4855
  • I've shot the rest, I now own the best - CZ
Re: (2) P01 projects completed....
« Reply #2 on: April 13, 2019, 03:19:32 PM »
I like the green one.  Those grips and the green finish really go together.
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline The Guardian

  • Full Member
  • ***
  • Posts: 277
  • CZ dreamin'... zzzzzzz..... don't wake me
Re: (2) P01 projects completed....
« Reply #3 on: April 13, 2019, 04:23:24 PM »
Wow, very nice. The black one looks like it has a shorter trigger pull.

The Black P01 has the Reach Reduction Kit (RRK) installed, which does move the position of the trigger back a bit by design. 
“I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them."  John Wayne as J.B Books in "The Shootist" 1976

Offline adrian

  • Sr. Member
  • ****
  • Posts: 954
Re: (2) P01 projects completed....
« Reply #4 on: April 13, 2019, 05:07:05 PM »
     Hiya and thanks for sharing. They turned out great,unfortunately the real treat of shooting them,we can't enjoy. Be well.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4422
Re: (2) P01 projects completed....
« Reply #5 on: April 13, 2019, 06:02:32 PM »
Nice looking builds, thank you for the pics.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline czdrifter

  • Jr. Member
  • **
  • Posts: 62
Re: (2) P01 projects completed....
« Reply #6 on: April 13, 2019, 09:39:20 PM »
Nice job on the P-01s. After you get a chance to shoot them I would be very interested to hear your thoughts about the RRK and 11.5# hammer spring vs the 15# hammer spring. With the other components of the builds being so similar it should be a great chance to do a side by side comparison. Let us know what you think. Have fun at the range!

Offline The Guardian

  • Full Member
  • ***
  • Posts: 277
  • CZ dreamin'... zzzzzzz..... don't wake me
Re: (2) P01 projects completed....
« Reply #7 on: April 14, 2019, 12:36:22 PM »
Nice job on the P-01s. After you get a chance to shoot them I would be very interested to hear your thoughts about the RRK and 11.5# hammer spring vs the 15# hammer spring. With the other components of the builds being so similar it should be a great chance to do a side by side comparison. Let us know what you think. Have fun at the range!

i?ve had some set up identical to these in the past.....

The OD Geen DA pull is a bit stiffer on the 15# main with the associated longer trigger pull and a longer take-up in SA. Look at as an improved stock trigger and action.

The RRK and Ultra-Lite Kit (11.5# main) on the Black make for a lighter trigger pull and virtually no take-up other than what I set it up for. SA is a bit lighter than the OD set up as well with very little take-up or over travel due to the adjustability of the trigger. Much more a custom feel & set-up.
“I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them."  John Wayne as J.B Books in "The Shootist" 1976

Offline czdrifter

  • Jr. Member
  • **
  • Posts: 62
Re: (2) P01 projects completed....
« Reply #8 on: April 14, 2019, 09:08:30 PM »
Nice job on the P-01s. After you get a chance to shoot them I would be very interested to hear your thoughts about the RRK and 11.5# hammer spring vs the 15# hammer spring. With the other components of the builds being so similar it should be a great chance to do a side by side comparison. Let us know what you think. Have fun at the range!

i?ve had some set up identical to these in the past.....

The OD Geen DA pull is a bit stiffer on the 15# main with the associated longer trigger pull and a longer take-up in SA. Look at as an improved stock trigger and action.

The RRK and Ultra-Lite Kit (11.5# main) on the Black make for a lighter trigger pull and virtually no take-up other than what I set it up for. SA is a bit lighter than the OD set up as well with very little take-up or over travel due to the adjustability of the trigger. Much more a custom feel & set-up.

That is exactly what I was expecting. Thanks for the reply and now I know how to proceed with my P-01. Looking for a more custom feel with the lighter pull and little take-up and over travel.

Offline thedude

  • Full Member
  • ***
  • Posts: 392
Re: (2) P01 projects completed....
« Reply #9 on: April 14, 2019, 10:35:42 PM »
Very nice P-01s, I really like that OD Green!  :-* The only thing I would change are the grip screws, really don't belong imo.

Offline The Guardian

  • Full Member
  • ***
  • Posts: 277
  • CZ dreamin'... zzzzzzz..... don't wake me
Re: (2) P01 projects completed....
« Reply #10 on: April 15, 2019, 05:46:55 PM »
Very nice P-01s, I really like that OD Green!  :-* The only thing I would change are the grip screws, really don't belong imo.

Agreed......I actually had ordered screws, the wrongs ones arrived in the mail.....I do have some other pretty cool ones on their way as I write this  ;)
« Last Edit: April 18, 2019, 09:41:23 PM by The Guardian »
“I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them."  John Wayne as J.B Books in "The Shootist" 1976

Offline dbarn

  • Full Member
  • ***
  • Posts: 349
Re: (2) P01 projects completed....
« Reply #11 on: April 16, 2019, 02:03:36 PM »
Have you had good luck with the CZC 14 lb recoil springs? I've tried the CGW version and it did not last long at all.

Offline Texas377

  • Jr. Member
  • **
  • Posts: 45
Re: (2) P01 projects completed....
« Reply #12 on: April 16, 2019, 07:59:42 PM »
Wow!  Very impressive work.   8)
CZ Compact PCR
Sig Sauer P320
Walther CCP
Others, etc.

Offline The Guardian

  • Full Member
  • ***
  • Posts: 277
  • CZ dreamin'... zzzzzzz..... don't wake me
Re: (2) P01 projects completed....
« Reply #13 on: April 17, 2019, 09:59:03 AM »
Have you had good luck with the CZC 14 lb recoil springs? I've tried the CGW version and it did not last long at all.

I can only speak to the non-colored one?s CZC used to sell, I?m not sure if they changed manufacturing or just colored the same springs to define the various weights. They were a bit more ridged than the CGW piano wire recoil springs......and yes I had very good luck with the CZC springs. I?ve also used Wolff (www.gunsprings.com ) replacement springs with excellent results as well.

I get why CZC & CGW color the springs, BUT....really don?t care for all the paint flakes that creates during use and then having to clean the insides of the gun is a bit of a pain.....so anymore I use the Wolff springs, with no paint  ;D
« Last Edit: April 17, 2019, 10:03:08 AM by The Guardian »
“I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them."  John Wayne as J.B Books in "The Shootist" 1976

Offline dbarn

  • Full Member
  • ***
  • Posts: 349
Re: (2) P01 projects completed....
« Reply #14 on: April 17, 2019, 01:22:48 PM »
Have you had good luck with the CZC 14 lb recoil springs? I've tried the CGW version and it did not last long at all.

I can only speak to the non-colored one?s CZC used to sell, I?m not sure if they changed manufacturing or just colored the same springs to define the various weights. They were a bit more ridged than the CGW piano wire recoil springs......and yes I had very good luck with the CZC springs. I?ve also used Wolff (www.gunsprings.com ) replacement springs with excellent results as well.

I get why CZC & CGW color the springs, BUT....really don?t care for all the paint flakes that creates during use and then having to clean the insides of the gun is a bit of a pain.....so anymore I use the Wolff springs, with no paint  ;D

Thank you. I too do not like the paint flakes which seem to be never ending. I'll give the Wolff springs a try. It's good to know other 14 lb springs may last longer.

 

anything