Author Topic: Baby Uplula  (Read 665 times)

0 Members and 1 Guest are viewing this topic.

Offline viking499

  • Hero Member
  • *****
  • Posts: 4299
Baby Uplula
« on: January 04, 2020, 08:10:58 PM »
Will this work on the 75 Kadet mags or does it need to be a fullsize modified Uplula.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4812
Re: Baby Uplula
« Reply #1 on: January 04, 2020, 08:48:21 PM »
Full size modified, the Baby lula is too narrow for the CZ Kadet magazines. CZ Kadet mags are similar in dimension to the factory CZ 9mm/40 S&W mags so that you can use them in a 75 variant frame/lower once you install a Kadet slide.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline viking499

  • Hero Member
  • *****
  • Posts: 4299
Re: Baby Uplula
« Reply #2 on: January 04, 2020, 09:15:37 PM »
Thanks Tok

Offline DenStinett

  • Hero Member
  • *****
  • Posts: 5865
  • HALT, Who goes there?
Re: Baby Uplula
« Reply #3 on: January 08, 2020, 12:38:07 AM »
Full size modified, the Baby lula is too narrow for the CZ Kadet magazines. CZ Kadet mags are similar in dimension to the factory CZ 9mm/40 S&W mags so that you can use them in a 75 variant frame/lower once you install a Kadet slide.

Todd:
As Tok said, the Baby is for SOME Single Stack Mags only, not even a 1911 Mag will fit in it either
MagLULA does make the 22UpLULA
It is designed for Double Stack 22 (or .17) Mags ONLY
It's Top Yoke has a limiter so it only open enough to allow Rimfire Rounds to fit under it
And the Beak is shorter by about an eighth of an inch

So tell me again how Trump will be worse then the 8 years before HIM !

Offline Trblshtr

  • Full Member
  • ***
  • Posts: 117
Re: Baby Uplula
« Reply #4 on: January 16, 2020, 08:33:43 AM »
I use the 22UpLula to load my Kadet mags, almost a requirement when the magazines are new (where I found it impossible to get the last couple rounds in).  After running a few hundred rounds through each mag I can finally load them by hand but still often use the 22UpLula as it's somewhat quicker.
Steve

Offline DenStinett

  • Hero Member
  • *****
  • Posts: 5865
  • HALT, Who goes there?
Re: Baby Uplula
« Reply #5 on: January 18, 2020, 02:13:21 AM »
The 22UpLULA is nice .... for loading .22 (or .17) Mags ONLY

I thought it was funny;
That when the UpLULA first came-out, MagLULA made fun of HKS;
Saying that you needed several of their (HKS) Loaders, to load all the different Magazines out there
And that the UpLULA was a "One Loader does it all" type of deal
But the UpLULA didn't load most .380s and really nothing smaller than a 9mm
Then MagLULA offered their BabyUpLULA, for Single Stack Mags only .... but it doesn't even fit the 1911 Mags ....
What's up with THAT ? ! ?
THEN their 22UpLULA comes out .... mainly for us KADET Owners and all the other .22 Conversion Mags out there
So now you need all 3 MagLULA UpLULA Loaders, and you STILL can't load any Double Stack Magazines smaller than a 9mm, but larger than a .22lr, i.e a CZ 82 / 83 ! ! !

MagLULA should scrap all three of their current designs and just make one;
A Double Stack, .22 thru .45 .... Let's call it .... the UpLula-K   ;)
So tell me again how Trump will be worse then the 8 years before HIM !

Offline AZ_CZ

  • Hero Member
  • *****
  • Posts: 2763
Re: Baby Uplula
« Reply #6 on: January 18, 2020, 09:27:09 AM »
Don't forget the model-specific up-lula just for Uzi owners.

I think it's a great style loader for ARs but a modified HKS style for the Kadet is sweet. I love how it "holds" the mag so I dont have to jam it against something .
CZ Fanbot since 1996

Offline larryflew

  • Hero Member
  • *****
  • Posts: 3045
  • Minnesota
Re: Baby Uplula
« Reply #7 on: January 18, 2020, 01:24:34 PM »
DenStinett

MagLULA should scrap all three of their current designs and just make one;
A Double Stack, .22 thru .45 .... Let's call it .... the UpLula-K   ;)



Or make one like your mod that works with all and call model UlLula- D
, []]]]]]]]]]]\>
        )'_\   (
'            \ *\
'              \ _\


Larry

Minnesota shooter
and CZ fanatic
NRA life since the 70's
USAF 66-70

A rubber band pistol was confiscated from an algebra class because it was a weapon of math disruption.

Offline eastman

  • Hero Member
  • *****
  • Posts: 2623
Re: Baby Uplula
« Reply #8 on: January 18, 2020, 08:24:53 PM »
Don't tell my vz82 that the Uplula doesn't work, she thinks it works fine.
I don't look like my avatar!

Offline DenStinett

  • Hero Member
  • *****
  • Posts: 5865
  • HALT, Who goes there?
Re: Baby Uplula
« Reply #9 on: January 19, 2020, 12:59:06 AM »
Don't tell my vz82 that the Uplula doesn't work, she thinks it works fine.

I would guess it all depends on which Caliber it's in
So tell me again how Trump will be worse then the 8 years before HIM !

Offline eastman

  • Hero Member
  • *****
  • Posts: 2623
Re: Baby Uplula
« Reply #10 on: January 19, 2020, 08:56:32 PM »
Don't tell my vz82 that the Uplula doesn't work, she thinks it works fine.

I would guess it all depends on which Caliber it's in

9x18mm Mak, but I've also used it for the 83 with 9x17.
I don't look like my avatar!

Offline larryflew

  • Hero Member
  • *****
  • Posts: 3045
  • Minnesota
Re: Baby Uplula
« Reply #11 on: January 19, 2020, 09:15:50 PM »
Don't tell my vz82 that the Uplula doesn't work, she thinks it works fine.

I would guess it all depends on which Caliber it's in

9x18mm Mak, but I've also used it for the 83 with 9x17.

Should work on any 9 mm and 380.  Too wide for 32 and 22.  Den's modified works for all from my 44 Desert eagle to my Kadet.
, []]]]]]]]]]]\>
        )'_\   (
'            \ *\
'              \ _\


Larry

Minnesota shooter
and CZ fanatic
NRA life since the 70's
USAF 66-70

A rubber band pistol was confiscated from an algebra class because it was a weapon of math disruption.

Offline sberres

  • Full Member
  • ***
  • Posts: 222
Re: Baby Uplula
« Reply #12 on: January 20, 2020, 06:40:26 PM »
I just use the Den-mod version to load everything- single stack, double stack, 22, 380, 9, 40. Everyone complaining about the Taurus 22 mini-button difficult just needs to use this instead.  It’s about as close to universal as can be.
Alcohol, tobacco, and firearms should be the name of a convenience store, not a government agency.
SB