Author Topic: A neat trick for Decocking lever install for the P-07/09 published by CZ  (Read 659 times)

0 Members and 1 Guest are viewing this topic.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4810
Watch how he catches the decocking spring as he rotates the left side lever into place. The cool part stats at around (1:50).

« Last Edit: January 15, 2020, 12:04:32 AM by Tok36 »
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Wideload

  • Full Member
  • ***
  • Posts: 265
Thanks for sharing! That was the one thing that I've had trouble with during reassembly.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 2504
Wow - I NEED to try that.  I have a tool now, but that is megaslick!!!!  (If it works - as displayed).

Offline MarilynMonbro

  • Jr. Member
  • **
  • Posts: 95
Well that is neat!

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 2504
WARNING - one wrong move and it will slash up the nice finish on the P01 - NOT RECOMMENDED.  Do it with the P07 - NOT the P01. 

Offline Indy_Tim

  • Sr. Member
  • ****
  • Posts: 859
Did this on my P07 last night.  Works well and forever changes how I reassemble the P07/P09s in the collection.

Offline jurek

  • Sr. Member
  • ****
  • Posts: 518
WARNING - one wrong move and it will slash up the nice finish on the P01 - NOT RECOMMENDED.  Do it with the P07 - NOT the P01.
:o
works with P-01 Omega without single scratch.  8)

Offline Dasashooter

  • Newbie
  • *
  • Posts: 19
I do something very similar that I can’t remember were I saw basically put the decocker on while straight up and then use a polymer cleaning puck to very slightly separate left aid from frame to allow rotation and push back together. Never scratched a 75 omega and works well on the p07 etc. This may be even quicker though.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 2504
Again. One wrong move...

Can it be done with no scratch?  Obviously. Can one wrong move put a ding I’m your finish?  Yup.

Online jpy15026

  • Jr. Member
  • **
  • Posts: 31
good information to file for the future

Offline punisher12b

  • Jr. Member
  • **
  • Posts: 28
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #10 on: February 11, 2020, 06:02:21 AM »
ooooo gonna try that this weekend

 

anything