« previous next »
Pages: [1]   Go Down

Author Topic: A neat trick for Decocking lever install for the P-07/09 published by CZ  (Read 2542 times)

0 Members and 1 Guest are viewing this topic.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
A neat trick for Decocking lever install for the P-07/09 published by CZ
« on: January 14, 2020, 11:50:26 PM »
Watch how he catches the decocking spring as he rotates the left side lever into place. The cool part stats at around (1:50).

https://www.youtube.com/watch?v=JRIqDth3fAw&t=3s
« Last Edit: January 15, 2020, 12:04:32 AM by Tok36 »
Logged
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Wideload

  • Full Member
  • ***
  • Posts: 353
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #1 on: January 15, 2020, 07:13:14 AM »
Thanks for sharing! That was the one thing that I've had trouble with during reassembly.
Logged
A-1 Dinsintegrating Pistol
Illudium Q36 Explosive Space Modulator

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3311
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #2 on: January 18, 2020, 04:54:23 PM »
Wow - I NEED to try that.  I have a tool now, but that is megaslick!!!!  (If it works - as displayed).
Logged

Offline MarilynMonbro

  • Jr. Member
  • **
  • Posts: 82
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #3 on: January 25, 2020, 08:20:44 AM »
Well that is neat!
Logged

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3311
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #4 on: January 30, 2020, 06:07:48 PM »
WARNING - one wrong move and it will slash up the nice finish on the P01 - NOT RECOMMENDED.  Do it with the P07 - NOT the P01. 
Logged

Offline Indy_Tim

  • Sr. Member
  • ****
  • Posts: 884
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #5 on: January 30, 2020, 10:27:31 PM »
Did this on my P07 last night.  Works well and forever changes how I reassemble the P07/P09s in the collection.
Logged

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #6 on: January 31, 2020, 01:02:09 AM »
Quote from: briang2ad on January 30, 2020, 06:07:48 PM
WARNING - one wrong move and it will slash up the nice finish on the P01 - NOT RECOMMENDED.  Do it with the P07 - NOT the P01.
:o
works with P-01 Omega without single scratch.  8)
Logged

Offline Dasashooter

  • Jr. Member
  • **
  • Posts: 26
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #7 on: January 31, 2020, 02:44:59 PM »
I do something very similar that I can’t remember were I saw basically put the decocker on while straight up and then use a polymer cleaning puck to very slightly separate left aid from frame to allow rotation and push back together. Never scratched a 75 omega and works well on the p07 etc. This may be even quicker though.
Logged

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3311
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #8 on: January 31, 2020, 06:18:11 PM »
Again. One wrong move...

Can it be done with no scratch?  Obviously. Can one wrong move put a ding I’m your finish?  Yup.
Logged

Offline jpy15026

  • Jr. Member
  • **
  • Posts: 36
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #9 on: February 07, 2020, 04:24:08 PM »
good information to file for the future
Logged

Offline punisher12b

  • Newbie
  • *
  • Posts: 22
Re: A neat trick for Decocking lever install for the P-07/09 published by CZ
« Reply #10 on: February 11, 2020, 06:02:21 AM »
ooooo gonna try that this weekend
Logged
Pages: [1]   Go Up
« previous next »