Author Topic: P-10S grip extension  (Read 1331 times)

0 Members and 1 Guest are viewing this topic.

Offline downtown0309

  • Newbie
  • *
  • Posts: 11
P-10S grip extension
« on: May 14, 2021, 08:35:29 PM »
Does anyone make a grip extension for the magazine baseplate on the P-10S? I don't want a "plus round" extension, just a little extension for my pinky like a Pearce.

Offline gwes351

  • Jr. Member
  • **
  • Posts: 88
Re: P-10S grip extension
« Reply #1 on: May 16, 2021, 07:36:18 AM »
The only version I have found so far is from CZ itself (CZ parts).  They are pricey and shipping from Czech republic adds to this cost - but they are in stock per the website.  I've had 2 on order for a couple of weeks now.

https://www.cz-parts.com/cz-p-10-extended-mag-pad-aluminium

Offline downtown0309

  • Newbie
  • *
  • Posts: 11
Re: P-10S grip extension
« Reply #2 on: May 16, 2021, 07:39:24 AM »
Thank you!

Offline Ducksrus

  • Newbie
  • *
  • Posts: 11
Re: P-10S grip extension
« Reply #3 on: July 07, 2021, 10:24:54 PM »
gwes351, did the mag extensions come in from CZ-CR?
HB industries has had the CZ mag extensions, but out and not sure when delivery is coming from CZ-CR. Same with Greg Cote, they are out also. Both have been out for a while, probably like most things nowadays.

Offline gwes351

  • Jr. Member
  • **
  • Posts: 88
Re: P-10S grip extension
« Reply #4 on: July 14, 2021, 08:47:53 PM »
Ducksrus - no, they have not arrived.  Their website says available when they decide to make them (or a small run etc).  I'll let everyone know when (if?) they arrive

Offline alp3367

  • Full Member
  • ***
  • Posts: 152
Re: P-10S grip extension
« Reply #5 on: July 15, 2021, 01:58:15 PM »
The only version I have found so far is from CZ itself (CZ parts).  They are pricey and shipping from Czech republic adds to this cost - but they are in stock per the website.  I've had 2 on order for a couple of weeks now.

https://www.cz-parts.com/cz-p-10-extended-mag-pad-aluminium

 Just to be clear, that cz-parts.com company is not a part of CZ Group. It's a parts reseller that put CZ in their name.

Offline CCWLearner

  • Full Member
  • ***
  • Posts: 421
Re: P-10S grip extension
« Reply #6 on: July 18, 2021, 01:57:05 AM »
That's a decent-looking base pad... looks like it would be a good compromise between not being too bulky for CCW while also providing a full grip for your pinky finger.

Too bad they are kind of expensive and not widely available.

Anyway, depending on whether you plan to carry with your P10-S with this magazine or not, you might look into one of these:

https://leapers.com/index.php?act=prod_detail&itemno=PUBCZ01&midx=2381&allids=2377_2381

They are too bulky for CCW in my opinion but they work good for range mags.  They don't say they are specifically compatible with the P10-S but if they work with P10-C mags then they'll probably work with P10-S also.  They are also relatively cheap and easy to find on eBay.

I run them on my P-07 range mags.  I also stuck some adhesive foam weather stripping to the bottom of them, to cushion their impact when I drop my mags.

Offline Phyffe

  • Full Member
  • ***
  • Posts: 103
Re: P-10S grip extension
« Reply #7 on: August 09, 2021, 03:34:01 AM »
My P10S came with 2 grip extensions that look a lot like the UTG ones.

I really needed them and I have girly hands compared to most of you.

Offline Ducksrus

  • Newbie
  • *
  • Posts: 11
Re: P-10S grip extension
« Reply #8 on: August 26, 2021, 08:13:05 PM »
Has anyone tried the grip extensions from Galloway Precision and/or Springer Precision for P10-C or S?

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19264
Re: P-10S grip extension
« Reply #9 on: August 30, 2021, 04:05:58 AM »
No, but if you do will you tell us how they work? I find the P-10S grip is JUST barely long enough for me to get a full grip.

Offline Phyffe

  • Full Member
  • ***
  • Posts: 103
Re: P-10S grip extension
« Reply #10 on: September 05, 2021, 03:27:22 AM »
Does anyone make a grip extension for the magazine baseplate on the P-10S? I don't want a "plus round" extension, just a little extension for my pinky like a Pearce.

Sorry for the late response. This is what I bought.

https://www.ebay.com/itm/274264732595

Not quite identical to the pinky extensions that came with my P10S, its a tad shorter but it still does the job well for me and my smallish hands

Offline Butters

  • Newbie
  • *
  • Posts: 5
  • Jack of all trades and a master of none
Re: P-10S grip extension
« Reply #11 on: September 09, 2021, 03:32:35 AM »
This is late response but Henning makes some too that are really nice, a bit pricey but they look good. I pick up my P10S on Friday and will eventually get one. I already have 2 of the CZ +2s laying around that I used for my P-07, and also will use a shield arms +5, but think the Henning will look a lot better than the plastic CZ ones.
Butters 🧈

Offline Ducksrus

  • Newbie
  • *
  • Posts: 11
Re: P-10S grip extension
« Reply #12 on: September 12, 2021, 12:13:19 PM »
Purchased a Galloway +2 extension. The rear chamfer of the pad hits the inside tail of the backstrap. The magazine appears to work fine with dummy rounds, not shot yet. Gap between grip & extension is about same as standard mag. The extension should work, but I am going to increase the angle of chamfer on extension to improve matchup with backstrap.

Offline gwes351

  • Jr. Member
  • **
  • Posts: 88
Re: P-10S grip extension
« Reply #13 on: September 14, 2021, 08:53:16 PM »
well, I finally got around to contacting CZ-parts about my spring order for their extended mag base plates (I got busy doing summer things for a few months).  They found that their shipment to me got lost in NYC USPS for some reason.  They immediately offered a full refund, or to re-ship my order - I chose re-ship.  So I'll let y'all know when I get these.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19264
Re: P-10S grip extension
« Reply #14 on: September 15, 2021, 06:53:37 AM »
Good customer service there.

 

anything