Author Topic: 75b project - going Cajun - SP01  (Read 14607 times)

0 Members and 1 Guest are viewing this topic.

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #15 on: March 26, 2022, 07:53:38 PM »
13lb recoil. 13lb hammer.

Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #16 on: March 26, 2022, 08:02:50 PM »
I make mistakes along the way.   ::)

Shot the trigger return spring across the room, once.  Found it.

Lost the teeny lil hammer pin retention pin.  Had to get creative and shorten an old Hpin to fit.

Looking forward to seeing how it shoots at the range.  Horribly busy on Saturdays.   :o
Boomer on CZ

Offline Underwhere

  • Hero Member
  • *****
  • Posts: 1238
Re: 95b project - going Cajun
« Reply #17 on: March 26, 2022, 09:33:23 PM »
Nice job on this.

I especially like the full length guide rod. Every 75 I have is going to get that same treatment. What a difference it makes.

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #18 on: March 27, 2022, 04:24:23 PM »
Nice job on this.

I especially like the full length guide rod. Every 75 I have is going to get that same treatment. What a difference it makes.

Thanks underwhere.

I did a late run to the range last night.
Shot a couple boxes thru both my sp01 and the newest 95b modded here.

I'm in love with the CGW adjustable sear/hammer performance.  Very little creep compared to my sp01 with factory sear/hammer.

My sp01 has the $30 MCARBO trigger kit installed.   Everything is acceptable....except the creep.  So now the sp01 needs a little Cajun spice!



Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #19 on: March 31, 2022, 02:50:21 AM »
 Installed Dawson sights


Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #20 on: April 01, 2022, 04:08:12 AM »
Cajuninzation of my SP01.
It was jealous of the 75b.

Setting up to drive the pin - without scarring the hammer.  I drove the pin so I could just slip the hammer bar in onto the peg.



« Last Edit: April 01, 2022, 04:15:36 AM by OldFinger »
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #21 on: April 01, 2022, 04:16:22 AM »
To the vise for driving it home
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #22 on: April 01, 2022, 04:18:41 AM »
Cajun adjustable sear getting the red

Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #23 on: April 01, 2022, 04:21:52 AM »
Install reward.  Also...red.  😆
(Gun room locked up)
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #24 on: April 01, 2022, 07:28:18 PM »
SP-01.  Done deal.  Cajun Pro.
Only difference - using the OEM trigger return spring in the sp01.
3lb avg. pull weight.  Nice!
Just need Sights.


« Last Edit: April 01, 2022, 07:38:25 PM by OldFinger »
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #25 on: April 01, 2022, 07:31:11 PM »
My Spice girls with Cajun Pro injections.

The 75b avgs 2.75lb pull weight, using the cgw reduced power trigger return spring.

Both Hammer springs 13lb
Recoil springs 12 and 13lb.
 

 
« Last Edit: April 01, 2022, 07:42:20 PM by OldFinger »
Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #26 on: April 01, 2022, 07:45:57 PM »
Nasty Moly on my semi-polished rails.

Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #27 on: April 01, 2022, 07:55:38 PM »
75b exposed rod.

Boomer on CZ

Offline OldFinger

  • Full Member
  • ***
  • Posts: 148
Re: 95b project - going Cajun
« Reply #28 on: April 02, 2022, 04:24:11 PM »
Range day starter kit


Boomer on CZ

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: 95b project - going Cajun
« Reply #29 on: April 03, 2022, 08:14:57 AM »
Your subject line "95b" made me wonder if there was a CZ model that I was missing!

I went through all of the pictures that you posted and still couldn't find anything "95b", so I presume you meant "75b" and it is just a typo.

You can go back to your original post and select "Modify" and correct your subject line.
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD