Author Topic: P-01 holster chart  (Read 229374 times)

0 Members and 1 Guest are viewing this topic.

Pzerone

  • Guest
P-01 holster chart
« Reply #30 on: August 15, 2007, 06:55:59 PM »
For my P-01 I have a Galco Fed Paddle that was made for the sig P229.  It fits real well and the retention is adjustable so thats a plus.  It is also a roto paddle so you can put it at whatever cant you like.
heres a link
www.usgalco.com/HolsterG3.asp?ProductID=384&GunID=153
-Pzerone

Offline amc31b

  • Jr. Member
  • **
  • Posts: 28
P-01 holster chart
« Reply #31 on: August 21, 2007, 05:25:20 PM »
In responce to stdlrf11 and others, If you want a good fobus holster, the model number must be RU97. The HK1 doesnt fit the P01 correctly and there isnt enough retention. Fobus updated their holster usage chart and the RU97 has (fits the ruger 9 series) a much better fit and retention. I bought the HK1 from Gander Mountain and wasnt happy with it after about a week. I called Fobus to see if I could exchange the HK1 for the RU97 and they said "not a problem, your return authorization number is......" The whole process took 10 business days and I am alot happier now.
If others have this problem and dont abosolutely need their fobus holster, this would be the way to go. The cost for me to ship the holster back to Fobus was only $1.78.
I hope this helps those of you that have or are looking at the Fobus holsters.

Offline stdlrf11

  • Hero Member
  • *****
  • Posts: 623
    • FIN Gear, Quality Gun Cleaning Gear
P-01 holster chart
« Reply #32 on: August 21, 2007, 06:49:21 PM »
That is good to know, amc31b. Thank you.

Here is the updated list so far:

BRAND--------STYLE---------GUN FIT
Fobus---------Any style------HK1 (usp compact)
---------------------------------updated: RU97 (ruger p series)
High Noon----IWB (Mr. Softy)--CZ40B
Bianchi--------Paddle---------HK compact
Galco----------Paddle---------Glock 19
Bianchi--------IWB------------M-100
Galco----------Sky Ops--------Glock 19
G&G-----------IWB 890--------Glock 27or19 (required wet fitting)
Galco----------CSL224B-------Glock
K&D-----------Laredo DefenderOWB--- not stated
Fist-----------#17A, IWB------not stated
Fist-----------#18, Paddle-----not stated
Fist-----------IWB tuckable---not stated
Galco---------M5X Matrix------P01--M5X470
Safariland----6280 Mid-Ride Level II Holster - Right / Plain-#290 CZ 75 P-01 3.8-inch BBL
Galco--------Fed paddle-------Sig 229
Bianchi------Model 7500 paddle------size 11

If anyone can make the list look better, have at it.


Thanks again, everyone for the good info.
stdlrf11
Any poor souls who trespass against us
Whether it be beast or man
Will suffer the bite or be stung dead on sight
By those who inhabit this land

For there's is the power and this is the kingdom
As sure as the sun does burn
So enter this path, but heed these four words,
You shall never return

Offline Murph50

  • Newbie
  • *
  • Posts: 18
P-01 holster chart
« Reply #33 on: August 30, 2007, 05:14:17 PM »
I just got a Bianchi Model 7500 paddle holster for my P01. The gun fits perfect. It's a multi-position carry and adjusts for draw angle,draw height and can be used strong side or crossdraw.It's a closed end holster and the barrel fits right up to the end and the trigger is covered. Also on the package it says size 11.
Wish I could post a pic but I'm a computer idiot and don't know how to do that.:lol
On the list above this may be the same holster you have listed that says --Bianchi--paddle--HK compact

Offline DWARREN123

  • Full Member
  • ***
  • Posts: 131
P-01 holster chart
« Reply #34 on: September 30, 2007, 11:56:49 AM »
Don Hume - H715 M NO. 36-4" - IWB - CZ 75 compact 40S&W
I believe this is for Glock 19/23.
It is leather with metal spring clip.

Don Hume - H715 M NO. 26F-4.5 - IWB - CZ 75 Compact 9mm
I believe is for a Beretta Cougar 8000/8040/8045.
It is leather with metal clip.

Both picked up at a gun show and checked for fit.
A good place to pick up Don Hume leather holsters is  WWW.GUNNERSALLEY.COM

Offline goishi

  • Jr. Member
  • **
  • Posts: 43
P-01 holster chart
« Reply #35 on: December 01, 2007, 03:30:15 AM »

Could we have a sticky for this please?  Finding a holster for the P01 is such a pain, and this is the only decent database of holsters that fit it.

Offline Il Hunter

  • Jr. Member
  • **
  • Posts: 79
P-01 holster chart
« Reply #36 on: December 01, 2007, 09:37:31 AM »
Blade-Tech sting ray................  


 


 


 



Offline stdlrf11

  • Hero Member
  • *****
  • Posts: 623
    • FIN Gear, Quality Gun Cleaning Gear
P-01 holster chart
« Reply #37 on: December 25, 2007, 01:30:14 PM »
I just received my Galco M5X Matrix holster yesterday. I am still adjusting the tension screws to get the retention I want.













It sits much closer to the body, and conceals much better than a Fobus, and it provides good retention. For $23, it is a great paddle holster.



stdlrf11



Any poor souls who trespass against us
Whether it be beast or man
Will suffer the bite or be stung dead on sight
By those who inhabit this land

For there's is the power and this is the kingdom
As sure as the sun does burn
So enter this path, but heed these four words,
You shall never return

Offline DirksterG30

  • Jr. Member
  • **
  • Posts: 62
P-01 holster chart
« Reply #38 on: December 28, 2007, 06:29:11 AM »






My P-01 rides IWB in a C-TAC

Offline RFWobbly

  • Full Member
  • ***
  • Posts: 107
P-01 holster chart
« Reply #39 on: December 30, 2007, 11:13:54 AM »
The store that sold me my P01 had no holsters, so a quick trip to my favorite gun store netted me a very comfortable DeSantis "Cozy Partner" model 028 to fit a Sig 226. (The holster is labeled "028 M9") The fit, holding power and protection for the gun is excellent. This is a closed end, inside the belt, adjustable pinch, leather holster that is extremely comfortable and very well made.

http://www.desantisholster.com/028.html

My only complaint about the design is the DeSantis method of belt retention involves 2 leather straps, rather than the more common metal clip. These loose straps go under the belt (at the same time you are sliding the holster inside the rear of your pants), then the loops fold around the outside of the belt and snap back at the top. It is very hard to install without almost getting dressed with the holster. So much so that for a quick 45 min walk with my wife I usually use another holster. However, for any wear longer than 2 hours the comfort is well worth it.

This is definitely all-day on-duty cop gear, not casual wear.





Addendum

In finding this holster the clerk and I went through maybe 30 holsters. On form-fitting holsters we noted that you must only consider holsters for full rail, mid-sized, auto-loaders. The Sig 226 and Glock slide release levers are flush stampings, so their kydex types won't work with the P01's protruding slide release, but some leather holsters for the 226 will. You simply have to try.

Offline RFWobbly

  • Full Member
  • ***
  • Posts: 107
P-01 holster chart
« Reply #40 on: December 30, 2007, 01:08:43 PM »
Rear view....

 



Offline petr123

  • Newbie
  • *
  • Posts: 8
P-01 holster chart
« Reply #41 on: December 30, 2007, 10:02:40 PM »
The Fabos RU-97 works well.
It's a little longer than the Fabos HK-1.
I have no problems, even with the Crimson Laser Grips.
Not too bad for plastic.

Offline Wild Rice.fz1ownersassoci...

  • Jr. Member
  • **
  • Posts: 59
P-01 holster chart
« Reply #42 on: December 31, 2007, 12:42:21 PM »
If you want an inexpensive inside-the-waist-band holster, try the Uncle Mike's Sidekick "Inside the Pants" with Velcro retention (size #15). Make sure to buy the one with retention. The non-retention version sits the gun up higher and I find myself touch checking the gun far too often. The retention version is safe and secure and gives peace of mind. I like wearing it at the small of the back where it is comfortable for standing and walking, but makes me sit bolt upright in the car.

The outside lower corners of the holster's plastic clip are sharp and will rub upholstery. I filed the sharp corners to a smooth blunt edge. Don't know why Uncle Mike's sells them with sharp corners. They should have picked up on that trait with field testing.

I made a correction.  It is size #15 that you want for the P01.
« Last Edit: December 31, 2007, 06:42:30 PM by Wild Rice »

Dahwg-czechpistols82792

  • Guest
P-01 holster chart
« Reply #43 on: January 11, 2008, 12:19:05 PM »
Thanks for the info and all the pics. I'm really interested in the Galco M5X Matrix, seems to be really good for the price. Can we get this stickied? This is a fantastic reference! Anyone have any experience with the Bianchi 7001? Looks like a good no-nonsense holster, as I do not have my CCW permit yet, I will be carrying open- if at all (mostly hiking and out and about during the weekend). Any thoughts on this particular holster?

Offline stdlrf11

  • Hero Member
  • *****
  • Posts: 623
    • FIN Gear, Quality Gun Cleaning Gear
P-01 holster chart
« Reply #44 on: January 11, 2008, 12:55:59 PM »
The Bianchi 7001 is a good holster. I use one similiar (only with the duty-belt attachment) for my dept. issued SIG 226 when I'm at the range. As with most holsters, one sized for the Glock 19 or Sig 226/229 should work, but I can't guarantee it will. I can definitely recommend the M5X. stdlrf11
Any poor souls who trespass against us
Whether it be beast or man
Will suffer the bite or be stung dead on sight
By those who inhabit this land

For there's is the power and this is the kingdom
As sure as the sun does burn
So enter this path, but heed these four words,
You shall never return

 

anything