Author Topic: P-01 holster chart  (Read 261441 times)

0 Members and 2 Guests are viewing this topic.

Offline goishi

  • Jr. Member
  • **
  • Posts: 43
P-01 holster chart
« Reply #30 on: December 01, 2007, 03:30:15 AM »

Could we have a sticky for this please?  Finding a holster for the P01 is such a pain, and this is the only decent database of holsters that fit it.

Offline Il Hunter

  • Jr. Member
  • **
  • Posts: 79
P-01 holster chart
« Reply #31 on: December 01, 2007, 09:37:31 AM »
Blade-Tech sting ray.
« Last Edit: July 02, 2025, 07:50:11 AM by Wobbly »

Offline DirksterG30

  • Jr. Member
  • **
  • Posts: 62
P-01 holster chart
« Reply #32 on: December 28, 2007, 06:29:11 AM »






My P-01 rides IWB in a C-TAC

Offline RFWobbly

  • Full Member
  • ***
  • Posts: 105
P-01 holster chart
« Reply #33 on: December 30, 2007, 11:13:54 AM »
The store that sold me my P01 had no holsters, so a quick trip to my favorite gun store netted me a very comfortable DeSantis "Cozy Partner" model 028 to fit a Sig 226. (The holster is labeled "028 M9") The fit, holding power and protection for the gun is excellent. This is a closed end, inside the belt, adjustable pinch, leather holster that is extremely comfortable and very well made.

http://www.desantisholster.com/028.html

My only complaint about the design is the DeSantis method of belt retention involves 2 leather straps, rather than the more common metal clip. These loose straps go under the belt (at the same time you are sliding the holster inside the rear of your pants), then the loops fold around the outside of the belt and snap back at the top. It is very hard to install without almost getting dressed with the holster. So much so that for a quick 45 min walk with my wife I usually use another holster. However, for any wear longer than 2 hours the comfort is well worth it.

This is definitely all-day on-duty cop gear, not casual wear.





Addendum

In finding this holster the clerk and I went through maybe 30 holsters. On form-fitting holsters we noted that you must only consider holsters for full rail, mid-sized, auto-loaders. The Sig 226 and Glock slide release levers are flush stampings, so their kydex types won't work with the P01's protruding slide release, but some leather holsters for the 226 will. You simply have to try.

Offline petr123

  • Newbie
  • *
  • Posts: 8
P-01 holster chart
« Reply #34 on: December 30, 2007, 10:02:40 PM »
The Fabos RU-97 works well.
It's a little longer than the Fabos HK-1.
I have no problems, even with the Crimson Laser Grips.
Not too bad for plastic.

Offline Wild Rice.fz1ownersassoci...

  • Jr. Member
  • **
  • Posts: 59
P-01 holster chart
« Reply #35 on: December 31, 2007, 12:42:21 PM »
If you want an inexpensive inside-the-waist-band holster, try the Uncle Mike's Sidekick "Inside the Pants" with Velcro retention (size #15). Make sure to buy the one with retention. The non-retention version sits the gun up higher and I find myself touch checking the gun far too often. The retention version is safe and secure and gives peace of mind. I like wearing it at the small of the back where it is comfortable for standing and walking, but makes me sit bolt upright in the car.

The outside lower corners of the holster's plastic clip are sharp and will rub upholstery. I filed the sharp corners to a smooth blunt edge. Don't know why Uncle Mike's sells them with sharp corners. They should have picked up on that trait with field testing.

I made a correction.  It is size #15 that you want for the P01.
« Last Edit: December 31, 2007, 06:42:30 PM by Wild Rice »

Dahwg-czechpistols82792

  • Guest
P-01 holster chart
« Reply #36 on: January 11, 2008, 12:19:05 PM »
Thanks for the info and all the pics. I'm really interested in the Galco M5X Matrix, seems to be really good for the price. Can we get this stickied? This is a fantastic reference! Anyone have any experience with the Bianchi 7001? Looks like a good no-nonsense holster, as I do not have my CCW permit yet, I will be carrying open- if at all (mostly hiking and out and about during the weekend). Any thoughts on this particular holster?

Offline stdlrf11

  • Sr. Member
  • ****
  • Posts: 619
    • FIN Gear, Quality Gun Cleaning Gear
P-01 holster chart
« Reply #37 on: January 11, 2008, 12:55:59 PM »
The Bianchi 7001 is a good holster. I use one similiar (only with the duty-belt attachment) for my dept. issued SIG 226 when I'm at the range. As with most holsters, one sized for the Glock 19 or Sig 226/229 should work, but I can't guarantee it will. I can definitely recommend the M5X. stdlrf11
Any poor souls who trespass against us
Whether it be beast or man
Will suffer the bite or be stung dead on sight
By those who inhabit this land

For there's is the power and this is the kingdom
As sure as the sun does burn
So enter this path, but heed these four words,
You shall never return

Dahwg-czechpistols82792

  • Guest
P-01 holster chart
« Reply #38 on: January 11, 2008, 01:10:57 PM »
Quote from: stdlrf11
The Bianchi 7001 is a good holster. I use one similiar (only with the duty-belt attachment) for my dept. issued SIG 226 when I'm at the range. As with   most holsters, one sized for the Glock 19 or Sig 226/229 should work, but I can't guarantee it will. I can definitely recommend the M5X. stdlrf11
 

Good to know - the only hesitation I have with the M5X is that it is retained by friction.  I think I would rather trust a retention strap.  I dunno.  Guess I'll have to try it out at my local gun shop when my P0-1 gets here.


Offline ShortyBP

  • Full Member
  • ***
  • Posts: 137
P-01 holster chart
« Reply #39 on: January 11, 2008, 02:22:01 PM »
+1 for the M5X!



And much thanks to wlchase and others who helped convince me to give it a try.

I couldn't dump my Fobus HK1 fast enough after getting the Galco. Would still like to get a leather IWB at some point, but for now, the M5X is all I need and then some. Definitely give one a try if you get a chance.

Offline CleftAsunderP01

  • Newbie
  • *
  • Posts: 20
P-01 holster chart
« Reply #40 on: January 12, 2008, 11:27:59 AM »
You don't ever want to get a closed end holster, they are an outdated design. Dirt builds up at the bottom, going into the barrel. The main problem is that moisture builds up from sweat, causing the weapon to rust over time.

Dahwg-czechpistols82792

  • Guest
P-01 holster chart
« Reply #41 on: January 21, 2008, 08:52:36 AM »
My M5X is on the way as well.

Offline JM05588

  • Newbie
  • *
  • Posts: 4
P-01 holster chart
« Reply #42 on: January 23, 2008, 09:39:29 AM »
I've found a great little holster for my P-01. It's a Gould & Goodrich (G&G) Gold Line Yaqui Slide Holster Model B801-G20. It's designed for either a Glock, HK, Ruger and/or a Sig with a rail. My P-01 fits snug as a bug after tightening the retention screws a little bit. I purchased the holster from GT Distributors (www.gtdist.com) in Austin, Texas for $28.95.

Offline stdlrf11

  • Sr. Member
  • ****
  • Posts: 619
    • FIN Gear, Quality Gun Cleaning Gear
P-01 holster chart
« Reply #43 on: January 23, 2008, 03:07:42 PM »
Updated 1/23/08

BRAND--------------STYLE--------------GUN FIT---------PART #
Bianchi---------------Paddle----------------HK compact
Bianchi---------------IWB------------------M-100
Bianchi--------------paddle----------------not stated----------Model 7500 size 11
Blade Tech--------Stingray----------------P-01
DeSantis-----------IWB--------------------Sig 226------------028-M9
Don Hume---------IWB-------------------Glock 19/23-------H715 M NO. 36-4"
Don Hume---------IWB-------------------Beretta Cougar----H715 M NO. 26F-4.5
Fist-------------------#17A, IWB----------not stated
Fist-------------------#18, Paddle----------not stated
Fist-------------------IWB tuckable-------not stated
Fobus-----------------Paddle---------------HK1 (usp compact)
------------------------------------------------updated: RU97 (ruger p series)
Galco-----------------Paddle----------------Glock 19
Galco-----------------Sky Ops--------------Glock 19
Galco----------------CSL224B-------------Glock
K&D-----------------Laredo OWB--------not stated
Galco----------------M5X Matrix---------P01-----------------M5X470
Galco----------------Fed paddle-----------Sig 229
G&G-----------------IWB 890-------------Glock 27or19 (required wet fitting)
G&G----------------Yaqui Slide-----------Glock, HK, Ruger, Sig---B801-G20
High Noon-----------IWB (Mr. Softy)---CZ40B
Uncle Mikes-------IWB-------------------size 15
Safariland---------6280 Mid-Ride Level II Holster - Right / Plain-#290 CZ 75 P-01



stdlrf11
Any poor souls who trespass against us
Whether it be beast or man
Will suffer the bite or be stung dead on sight
By those who inhabit this land

For there's is the power and this is the kingdom
As sure as the sun does burn
So enter this path, but heed these four words,
You shall never return

Dahwg-czechpistols82792

  • Guest
P-01 holster chart
« Reply #44 on: January 24, 2008, 02:06:27 PM »
Try wrapping code tags around the table like this:

 BRAND--------------STYLE--------------GUN FIT-----------PART # 
==============================================================
Bianchi------------Paddle-------------HK compact
Bianchi------------IWB----------------M-100
Bianchi------------paddle-------------not stated--------Model 7500 size 11
Blade Tech---------Stingray-----------P-01
DeSantis-----------IWB----------------Sig 226-----------028-M9
Don Hume-----------IWB----------------Glock 19/23-------H715 M NO. 36-4"
Don Hume-----------IWB----------------Beretta Cougar----H715 M NO. 26F-4.5
Fist---------------#17A, IWB----------not stated
Fist---------------#18, Paddle--------not stated
Fist---------------IWB tuckable-------not stated
Fobus--------------Paddle-------------HK1 (usp compact)
--------------------------------------updated: RU97 (ruger p series)
Galco--------------Paddle-------------Glock 19
Galco--------------Sky Ops------------Glock 19
Galco--------------CSL224B------------Glock
K&D----------------Laredo OWB---------not stated
Galco--------------M5X Matrix---------P01---------------M5X470
Galco--------------Fed paddle---------Sig 229
G&G----------------IWB 890------------Glock 27or19 (required wet fitting)
G&G----------------Yaqui Slide--------Glock, HK, Ruger, Sig---B801-G20
High Noon----------IWB (Mr. Softy)----CZ40B
Uncle Mikes--------IWB----------------size 15
Safariland---------6280 Mid-Ride Level II Holster - Right / Plain-#290 CZ 75 P-01
« Last Edit: January 24, 2008, 02:08:45 PM by Dahwg »