« previous next »
Pages: [1] 2   Go Down

Author Topic: My Poor-man's DOH for the Duty  (Read 7599 times)

0 Members and 1 Guest are viewing this topic.

Offline AbyssDncr

  • Full Member
  • ***
  • Posts: 425
My Poor-man's DOH for the Duty
« on: April 04, 2009, 03:42:00 AM »
Kydex showed up yesterday, and luckily for me Harbor Freight had the heat guns on sale for $10.

So a couple hours later, I have the poor-man's Dropped Offset Holster for my P07.  I didn't think I could wait for Bladetech to try it out on USPSA night. 

This was my first attempt at Kydex work, and I didn't get started til midnight after a couple long-islands  ::), so it isn't real "purty" per se.  But it'll work!

And I still have lots more kydex to monkey with!   ;D







I'll hit my dad's place tomorrow and clean up the corners & whatnot with his belt sander to make it a little more presentable.  Cool thing is that it's about $9 worth of materials and $5 of that is the belt loop that can be swapped to any other holster if I want.  I can also flip the belt loop around to make it ride high for carry.  I've still hot some minor tweaks to make because the serial number plate is gradually shaving the insides, but whatever...  I'm tickled with it!   ;)
Logged
SP-01, P-01, CZ-75 Compact, CZ-75 Kadet, CZ-40B, CZ-83 Nickel, CZ-52, CZ-70, CZ-50, CZ 700 Sniper,  CZ 527 Kevlar, CZ 452 Ultra Lux, CZ 452 American 16", CZ 452 Scout, CZ V22 AR Upper, Sar K2

Offline natgas

  • Jr. Member
  • **
  • Posts: 60
Re: My Poor-man's DOH for the Duty
« Reply #1 on: April 04, 2009, 07:23:43 AM »
Looks good so far. Let us know how your "detail" work goes
Logged

Offline dusty10

  • Hero Member
  • *****
  • Posts: 875
Re: My Poor-man's DOH for the Duty
« Reply #2 on: April 04, 2009, 07:34:02 AM »
Nice job.  ;D  How about trying an IWB model too?  8)
Logged
"When people are universally ignorant and debauched in their manners, they will sink under their own weight without the aid of foreign invaders."   Samuel Adams

Offline knightrider

  • Newbie
  • *
  • Posts: 9
Re: My Poor-man's DOH for the Duty
« Reply #3 on: April 04, 2009, 01:00:50 PM »
would you make me one? i would pay you for the trouble.
 thanks
KR
Logged

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8620
Re: My Poor-man's DOH for the Duty
« Reply #4 on: April 04, 2009, 03:14:08 PM »
that's cool..
you may have to build me one.
Logged

Offline AbyssDncr

  • Full Member
  • ***
  • Posts: 425
Re: My Poor-man's DOH for the Duty
« Reply #5 on: April 04, 2009, 04:15:05 PM »
Quote from: knightrider on April 04, 2009, 01:00:50 PM
would you make me one? i would pay you for the trouble.
 thanks
KR

Tried to send you a PM - holler if it didn't make it through.

This one is from 0.080" sheet; I'll start playing with the 0.093" next to see if its a little more durable.
Logged
SP-01, P-01, CZ-75 Compact, CZ-75 Kadet, CZ-40B, CZ-83 Nickel, CZ-52, CZ-70, CZ-50, CZ 700 Sniper,  CZ 527 Kevlar, CZ 452 Ultra Lux, CZ 452 American 16", CZ 452 Scout, CZ V22 AR Upper, Sar K2

Offline pitbull

  • Hero Member
  • *****
  • Posts: 1054
Re: My Poor-man's DOH for the Duty
« Reply #6 on: April 04, 2009, 04:49:25 PM »
The holster looks good to me. For less than $10 you can't beat it. The best part is you have the holster now and don't have to wait 3 to 6 months for someone to come out with their design.
Logged

ClarkstonCZ

  • Guest
Re: My Poor-man's DOH for the Duty
« Reply #7 on: April 04, 2009, 04:55:24 PM »
I love how innovative CZF members are. Seems like you guys are willing to go the extra mile to get something new and exciting
to work for your guns.
Logged

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19903
Re: My Poor-man's DOH for the Duty
« Reply #8 on: April 05, 2009, 04:50:30 PM »
And this is why AbyssDncr is the mod for this forum, nice work!
Logged

Chongo

  • Guest
Re: My Poor-man's DOH for the Duty
« Reply #9 on: April 06, 2009, 12:01:46 AM »


Don Hume IWB for the 4" Springfield XD works.
Logged

Offline AbyssDncr

  • Full Member
  • ***
  • Posts: 425
Re: My Poor-man's DOH for the Duty
« Reply #10 on: April 06, 2009, 12:14:03 AM »
My Blackhawk SOB for a G19 also fits my P07, but the side frame stippling scratches the inside of the leather pretty heavily.

How tight is the Don Hume?
Logged
SP-01, P-01, CZ-75 Compact, CZ-75 Kadet, CZ-40B, CZ-83 Nickel, CZ-52, CZ-70, CZ-50, CZ 700 Sniper,  CZ 527 Kevlar, CZ 452 Ultra Lux, CZ 452 American 16", CZ 452 Scout, CZ V22 AR Upper, Sar K2

Chongo

  • Guest
Re: My Poor-man's DOH for the Duty
« Reply #11 on: April 06, 2009, 01:27:10 AM »
Quote from: AbyssDncr on April 06, 2009, 12:14:03 AM
My Blackhawk SOB for a G19 also fits my P07, but the side frame stippling scratches the inside of the leather pretty heavily.

How tight is the Don Hume?

Perfectly, as if it was made for it.  I was quite surprized.
Logged

Offline knightrider

  • Newbie
  • *
  • Posts: 9
Re: My Poor-man's DOH for the Duty
« Reply #12 on: April 07, 2009, 12:16:56 AM »
That ISW holster looks super dutyful. Get it like beutiful dutyful whahahahhah
Logged

Offline knightrider

  • Newbie
  • *
  • Posts: 9
Re: My Poor-man's DOH for the Duty
« Reply #13 on: April 07, 2009, 12:20:07 AM »
I was speaking of the kydex holster the thread auther made I do not know if he has posted picks here yet but he is doing a great job. GO CZ FORUM!
Logged

Offline pjhride

  • Jr. Member
  • **
  • Posts: 44
Re: My Poor-man's DOH for the Duty
« Reply #14 on: April 07, 2009, 10:15:15 AM »
That's a pretty darn good job for the first try.   I have been monkeying with kydex holsters for several months now.    The more you work with it the better you get.   
Logged
Pages: [1] 2   Go Up
« previous next »