P-10Cs should be coming

[ragingbulldaily]

Does it look anything like this? Hope you don't mind. Being new to CZ I need to fill my information basket.. Thanks again for your help.

[Gretsch9]

I put 300 rounds through my P10c today. 50 defensive, 150 Win white box and 100 of my reloads. I had three  reloads that were a little long but chambered and went bang with a light tap to the slide. It's Easy to control, nice trigger, feels great in the hand. I did sand the backstrap a little and black out the rear sights. I've got 2 Glock holsters that Fit it,one from Harry's Holsters and one from JM Custom.
My only dislike at the moment is that the magazines stick a little when ejected. . The internal release lever teeters when the mag release is pushed (top moves in and the bottom teeters out) and it seems like the bottom of the lever rubs on the mag. It's like the mag brakes on the 75 that retain the magazine when ejected, so the mag drops about 1/4 of the way out. I'll fix that as well and am not worried about it. Overall a great range day!

[ragingbulldaily]

What grit did you use and how well did it take the edge off? Thanks for the report. How accurate was the gun, if you knew how to shoot.. Joke....

[deadduck357]

I have not pulled the trigger yet on this p10 I picked up yesterday. From the looks of the wear on the slide rails it looks like someone has. Also anyone who has a p10 does the slide wiggle a good amount when mated with the frame. Thanks for the help in advance.

Jeez, that looks like it's had a thousand rounds through it. You may have gotten one of the media demo guns.

[ragingbulldaily]

I can see your stand up show is about to begin... Let me have a drink so I can laugh at your bad jokes...

[ragingbulldaily]

Good to know you're here to help.

[picklenav130]

I have not pulled the trigger yet on this p10 I picked up yesterday. From the looks of the wear on the slide rails it looks like someone has. Also anyone who has a p10 does the slide wiggle a good amount when mated with the frame. Thanks for the help in advance.

I wouldn't worry about the finish wear. CZ runs every pistol they sell through a machine that cycles the action repeatedly something like 1000 times. It is a quality control process. So feel good your gun passed muster.

Matt

[ragingbulldaily]

Thanks Matt. I had another gentleman show me his gun that's not been fired yet, and it looked the same as mine. The wear on the slide rails had me bothered just because I don't honestly know much about CZ production system. Now if one of my new Glocks looked like that, then that would tell me it was used and not new. Same with the Smith. First day of getting a new gun is all the fun, second day is the OCD INSPECTION....

[Gretsch9]

What grit did you use and how well did it take the edge off? Thanks for the report. How accurate was the gun, if you knew how to shoot.. Joke....

Hehe, there's some truth to that joke. I used 180 grit and a light touch. Finer grit wasn't making a difference and it's what I had laying around. It's definitely more accurate than I am, like most pistols. I shot a 15 round slow fired group at 15yrds yielding a 3.38" group shot off hand  standing. This is plenty accurate for me.

[ragingbulldaily]

Thanks for the help/information kind sir.

[ragingbulldaily]

Thank you for your photo. I assume you're referring to the marks on your frame rails? If so, rest easy. Our pistols are cycled approximately 2,000+ times during the building process; this cycling replicates how hard the slide reciprocates when shooting live ammunition and this all is for insuring that each pistol is consistent in quality and ready to go out of the box. This cycling is why all pistols show such wear marks out of the box, and it means your CZ is built right, and ready to run.  I hope this helps explain to you why this is there, and brings you comfort.


Let us know if you have any further questions or concerns.


Thanks,


Dereck Miller

Sales Assistant

800-955-4486 x 334

fax: 913-321-2251

CZ-USA

[ragingbulldaily]

You where exactly right guys, thanks for all your help. Matt and the other nice guy gres9 sorry if I have the names wrong. Just wanted to say thanks again, and CZ verified exactly what you said. Have any of you ever used freedom ammo? I found a deal on the site, 115 grrn new, 500 rounds for 90$ free shipping on mother's day

[ragingbulldaily]

Thank you for your photo. I assume you're referring to the marks on your frame rails? If so, rest easy. Our pistols are cycled approximately 2,000+ times during the building process; this cycling replicates how hard the slide reciprocates when shooting live ammunition and this all is for insuring that each pistol is consistent in quality and ready to go out of the box. This cycling is why all pistols show such wear marks out of the box, and it means your CZ is built right, and ready to run.  I hope this helps explain to you why this is there, and brings you comfort.


Let us know if you have any further questions or concerns.


Thanks,


Dereck Miller

Sales Assistant

800-955-4486 x 334

fax: 913-321-2251

CZ-USA

[ragingbulldaily]

If you need a couple mags for the p10 the shop where I bought mine has two in stock. Let me know if you're interested and I can get you two together. I think it was 69.00

[ragingbulldaily]

Are you looking for mags Matt?