P-01 Omega Safety Concern?

[EZECZ75]

Still not back from CZ.

When did you send it in? Anyone else have any updates? I ended up selling mine.

I got it back today. It has been 3 weeks since I dropped it off at the store. They shipped 2 days later. They replaced the TRS. I ran 100 rounds through it today. No problems. I'll take it back this weekend for more range time. Trigger feels great and no decocker issues either.

[Criz]

That is a fast turnaround!
Sig took 6 weeks for the warranty on the 320. 

[M1A4ME]

That is a fast turnaround!
Sig took 6 weeks for the warranty on the 320.

Maybe they had a lot more 320's to deal with.  I'm not a SIG guy, just hear about the issues on many of the forums.  The decocker issue on the Omega P01's seems to be more random (and probably no where near as many Omega P01's out there as SIG 320's.)

[Criz]

WAAAAAAY more 320s to deal with and I actually think 4-6 weeks is pretty fast for Sig as long as it is done right.
I think the P01 issue is more 2017 models from what I can tell. 

[briang2ad]

What about 2018?  And what about the real cause and fix?  Too early to tell?

[s0nspark]

WAAAAAAY more 320s to deal with and I actually think 4-6 weeks is pretty fast for Sig as long as it is done right.
I think the P01 issue is more 2017 models from what I can tell.

It is also fair to say that Sig has a lot more resources assigned to the P320 recall.

IMO CZ-USA does a really good job, all things considered.

[del4c]

EZECZ75--

Did you have a prob with your decocker and they just replaced the TRS?

[EZECZ75]

EZECZ75--

Did you have a prob with your decocker and they just replaced the TRS?

I bought it used. Someone had replaced the stock decocker spring with th P-07/09 decocker spring before my possession. CZ replaced the TRS with a SP-01 spring. I don't know if that is any different from the regular P-01 spring. So, no I didn't have an issue with the decocker, my issue was the lack of triggers reset.

[2tango2]

Hmmmm I have a P-01 Omega I bought last year that hasn?t been to the range or even taken apart for an initial cleaning.

Chances are this is going to have the issues mentioned in this thread?


Sent from my iPhone using Tapatalk

[2tango2]

Hey guys.  I just took a closer look at my P-01 Omega.  It has a target date of 3/2/17 so it is an early 2017 build.  What dates do you guys have on your targets?

I?m not sure if I?m doing the test right though.....with the slide still on the frame and locked to the rear, I pressed down on the ejector a number of times.  I didn?t see or feel any movement on the decocker.


Am I looking for movement in the decocker to determine if my gun has the issue?

I?m also looking at a 18 Urban Gray P-01 Omega but maybe holding off if still a known issue


Sent from my iPhone using Tapatalk

[twowheels]

Hey guys.  I just took a closer look at my P-01 Omega.  It has a target date of 3/2/17 so it is an early 2017 build.  What dates do you guys have on your targets?

I?m not sure if I?m doing the test right though.....with the slide still on the frame and locked to the rear, I pressed down on the ejector a number of times.  I didn?t see or feel any movement on the decocker.


Am I looking for movement in the decocker to determine if my gun has the issue?

I?m also looking at a 18 Urban Gray P-01 Omega but maybe holding off if still a known issue


Sent from my iPhone using Tapatalk

If the ejector doesn't move down when you press on it with the slide locked back, that's good!  I am surprised however if that is the case as the ejector is held up by spring pressure. 

[2tango2]

Hey guys.  I just took a closer look at my P-01 Omega.  It has a target date of 3/2/17 so it is an early 2017 build.  What dates do you guys have on your targets?

I?m not sure if I?m doing the test right though.....with the slide still on the frame and locked to the rear, I pressed down on the ejector a number of times.  I didn?t see or feel any movement on the decocker.


Am I looking for movement in the decocker to determine if my gun has the issue?

I?m also looking at a 18 Urban Gray P-01 Omega but maybe holding off if still a known issue


Sent from my iPhone using Tapatalk

If the ejector doesn't move down when you press on it with the slide locked back, that's good!  I am surprised however if that is the case as the ejector is held up by spring pressure.

No the ejector moves, I think it needs to in order for the Omega system to function.

The decocker doesn?t have any visible movement in it when pressing down on the ejector.  I thought people who were having issues had movement of the decocker and or it was popping loose when the ejector was pressed down on more than once


Am I correct in saying that?


Sent from my iPhone using Tapatalk

[del4c]

Yes, that is correct- ejector will move and has some play, if  de-cocker pops out or moves when pressing down on ejector- problem exists

[YoungGun]

Picked up a 17 P-01 Omega Urban Grey yesterday for a great price (unfired from a private party with an extra mag).  Tested for the decocker issue by pressing on the ejector with the slide locked back. Result was a very slight outward movement of the left decocker.  Pressed it back in and using a sharp tooth pick, applied blue loctite on the right decocker. No more movement now with pressing of the ejector.

https://imgur.com/a/35eUG

Yg

[Criz]

Just got mine back from CZ.
Service was great.  Communition great.
Took 4 weeks back to the house.
Can't wait to shoot!