Good load for CZ TS2 Blue 9MM

[Wobbly]

• We have a template (HERE) in the Stickies that will help you post results, so that you don't forget the info we'd like to know. Now you'll need to answer some questions.

• I saw the bench setup and know you were shooting from a supported position. But how many rounds did you shoot of each load... and is your reported velocity the Average Velocity of each group ??

[wa1911]

• I shot 8 rounds for each load, the velocity I posted is the average. Temperature was 56 deg.
• I forgot to report that I happen to find some of the 124 gr RMR match winner that I ordered back in 2021 and loaded them at 1.085" COL over 4.0gr N320. It turned out was my best load of the date.
• Here is the report for that load. The picture is the first one on the list.

Equipment
Caliber:  9x19 Luger
Bullets:  RMR 124gr-FN-MW
Brass:    Win
Powder:  Vihta N320
Max Velocity:  1034  fps
Primer:  CCI Small Pistol
OAL:     1.085"
Pistol:    CZ TS2 Blue
Qty:      8 rounds each, slow fired
Weather:  56F and sunny
Chrono:  ProChrono

Load      Avg Vel           SD   
4.0 gr         1024           9

Now that I found the load I like, I am planning on loading 50 rounds of each and will test again and fine tune it.

I will start a new topic soon for reload 380 ACP defense load.

Thank you for all of your support.
   

[Wobbly]

• That is excellent reporting and great news for you !! I'm so happy it all worked out.

• Do us a favor and COPY this and PASTE it into a duplicate post in the N320 thread.... HERE.  That info is worth keeping in the N320 Vit thread. Thanks.

• N320 should do equally well in 380Auto... which is nothing more than 9x17mm, where the ones you just shot were 9x19mm. And if you end up doing your testing with 380Auto and Vit... you can just post it there to begin with.

All the best !

[Wobbly]

I saw you added this to the N320 thread. Thank you.

So the POI is higher than you want. You can do a "6 o'clock hold" where you point the sights at the bottom edge of the circle (the 6 o'clock position), or you can fit a taller front sight post.