CZ Bren Picture Thread?

[scotheocelot]

Hello CZ brethren!  I was not able to locate a picture thread for CZ Brens.  I just completed my Bren 2 Ms build (had the parts stock piled ready to go).  The Bren arrived Friday.  Anyways I wanted to ask before posting pictures here.  Thanks!!

Quick Rundown:

CZ Bren 2 Ms Pistol 9” 5.56
Dan Haga ACR Adapter Pistol Brace
KBI Trigger
KBI Charging Handle
KBI Selector Nubs
Cloud Defense Switch Holder
Surefire Tape Switch
Arisaka 300 Light
Bobro QD Scout Light Mount
TDI Arms Hybrid Hand Stop
Surefire Warcomp Flash Hider Comp
Surefire Warden
EOTech EXPS3-2






Sent from my iPhone using Tapatalk

[scotheocelot]

Crickets........ I guess I’ll just post them here. If there is an existing thread for Bren 2’s please feel free to move the pictures there.
 


Sent from my iPhone using Tapatalk

[scotheocelot]

Very Nice!

Thank you!


Sent from my iPhone using Tapatalk

[rdcinhou]

I've not found a "picture thread" specifically for Bren 2, but here's a link to a photo of my Bren as well as a few other people's:

https://czfirearms.us/index.php?topic=97811.msg754628#msg754628

[the war wagon]

Veddy, veddy, nice!  Are you a lefty, perchance?  As a STRONGLY dominant righty, my flashlights are ALWAYS on the left (offhand) side.  I see a lot more on the right side these days, but if one is NOT a lefty (or has foot-long fingers!!!), I'm curious as to the reason for strong-side migration of lights for rightys!

[rbuzz00]

Sent from my iPhone using Tapatalk

Great looking Bren 2, I'm jealous!  Just out of curiosity, how do you like the Dan Haga brace? I've been tempted to order the exact same setup as you have but I've been concerned about the finish on the brace adaptor. According to the website repeated usage can cause the finish to wear revealing the white plastic underneath. Other than that concern, it looks first class. 

How is your doing so far?

[scotheocelot]

I've not found a "picture thread" specifically for Bren 2, but here's a link to a photo of my Bren as well as a few other people's:

https://czfirearms.us/index.php?topic=97811.msg754628#msg754628

Very nice!  I love the two tones of the 805’s.  The pistol grip makes me cringe a little but hats off for exercising your rights. 


Sent from my iPhone using Tapatalk

[scotheocelot]

Veddy, veddy, nice!  Are you a lefty, perchance?  As a STRONGLY dominant righty, my flashlights are ALWAYS on the left (offhand) side.  I see a lot more on the right side these days, but if one is NOT a lefty (or has foot-long fingers!!!), I'm curious as to the reason for strong-side migration of lights for rightys!

Well, as you can tell from the picture, the hand guard is quite short so space is a premium. I am right handed so I prefer to have my “essentials” on the left typically. BUT given the Cloud Defense/Surefire Switch on top rail, it creates an Ambi operation of the light. If that’s the case, I prefer my lights on the right to free up space on the left for more grip area/options.  Given the extent of CZ design to create a nearly complete AMBI pistol, I wanted to extend that philosophy to added accessories.


Sent from my iPhone using Tapatalk

[scotheocelot]

Great looking Bren 2, I'm jealous!  Just out of curiosity, how do you like the Dan Haga brace? I've been tempted to order the exact same setup as you have but I've been concerned about the finish on the brace adaptor. According to the website repeated usage can cause the finish to wear revealing the white plastic underneath. Other than that concern, it looks first class. 

How is your doing so far?

I absolutely LOVE Dan Haga’s ACR adapting brace.  It absolutely makes this pistol a useful setup. Adjustable pull and cheek riser. I am getting consistent cheek welds just as my AR’s. And of course it looks absolutely AWESOME on the Bren.  I get your concern regarding the finish. However there is a couple of solutions I have already planned for if it comes to that.  1) You could have it hydrodipped a semi flat black or 2) SEM black trim paint available online or automotive store is very close and designed for painting plastic pieces.

In my opinion no other brace comes close to fit, finish and most of all USABILITY.  I am already planning to replace the SB brace from my Scorpion to a Dan Haga.

[rbuzz00]

I absolutely LOVE Dan Haga’s ACR adapting brace.  It absolutely makes this pistol a useful setup. Adjustable pull and cheek riser. I am getting consistent cheek welds just as my AR’s. And of course it looks absolutely AWESOME on the Bren.  I get your concern regarding the finish. However there is a couple of solutions I have already planned for if it comes to that.  1) You could have it hydrodipped a semi flat black or 2) SEM black trim paint available online or automotive store is very close and designed for painting plastic pieces.

In my opinion no other brace comes close to fit, finish and most of all USABILITY.  I am already planning to replace the SB brace from my Scorpion to a Dan Haga.

Thanks for the information. I have to admit the ACR stock and the Dan Hagan adaptor makes the best looking brace for the Bren 2.  The Strongarm brace also looks great.  I had wanted to SBR my Bren when I get it, but since CZ hasn't shown any signs of coming out with the CZ stock, I might just go the brace route. It's kind of expensive, but it sure looks nice. The only thing holding me back is the durability question.   

[anubismp]

I was looking around for a telescoping option but that is pretty nice. I love the ACR stock so that should be pretty nice.

[Lima26]

8" Bren 2MS with Dan Haga Designs ACR Tailhook adapter. 

[COJeff]

8" Bren 2MS with Dan Haga Designs ACR Tailhook adapter. 

How is the adapter given it is plastic?

[beanz2]

8" Bren 2MS with Dan Haga Designs ACR Tailhook adapter. 

How is the adapter given it is plastic?

The initial batch of 10 (which sold out within hours) were plastic just like his current B&T APC adapters, but the production Bren 2 adapters are aluminum AFAIK.


.

[Brenfan]

Bren 805 PS1 in FDE