Author Topic: Show me your P10 with optic. . .  (Read 2305 times)

0 Members and 1 Guest are viewing this topic.

Offline Hammer Time

  • Sr. Member
  • ****
  • Posts: 870
Re: Show me your P10 with optic. . .
« Reply #15 on: April 08, 2021, 12:54:38 PM »
Hammertime, I have the exact same set up except I have yet to replace the rear sight.  can you post a pic of the sight picture? also, how easy is the removal and replacement of the rear sight with the J point sights?  I do not have a sight pusher.  thanks.

My rear sight was jammed in there pretty good. Since the only sight pusher I own at the moment is pretty lame, I ended up taking it to my gunsmith and having him push the rear sight out and mount the new one.

I'll grab a pic of the sight picture when I get a chance...

Offline SEAKPhotog

  • Full Member
  • ***
  • Posts: 200
Re: Show me your P10 with optic. . .
« Reply #16 on: April 08, 2021, 09:04:45 PM »
Nice looking P10. Do you have specs for the back up sights?

Don't know.  I'll check.

Offline SEAKPhotog

  • Full Member
  • ***
  • Posts: 200
Re: Show me your P10 with optic. . .
« Reply #17 on: April 09, 2021, 02:00:58 PM »
I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.

P10C - Czech made
Holosun 507c
Glock sights
Killer Innovation threaded barrel
HB Industries Theta trigger
OLight PL Pro Valkyre
Milling and camo cerakote by Primary Machine

p10c by Joe, on Flickr
Nice looking P10. Do you have specs for the back up sights?

Front post: Dawson precision .280in
Rear: Ameriglo GL404 .394in

Offline cfrock

  • Jr. Member
  • **
  • Posts: 51
Re: Show me your P10 with optic. . .
« Reply #18 on: April 09, 2021, 07:03:18 PM »
Shroud thickness... the reason I prefer Vortex to Holosun









« Last Edit: April 09, 2021, 07:49:43 PM by cfrock »

Offline Hammer Time

  • Sr. Member
  • ****
  • Posts: 870
Re: Show me your P10 with optic. . .
« Reply #19 on: April 25, 2021, 11:55:01 AM »
Hammertime, I have the exact same set up except I have yet to replace the rear sight.  can you post a pic of the sight picture? also, how easy is the removal and replacement of the rear sight with the J point sights?  I do not have a sight pusher.  thanks.

Hey - apologies for not getting around to getting a good photo of the sight picture yet. What I can tell you is that I had to have my gunsmith use a sight pusher to get the OEM rear sight out and mount the OR rear sight. In general, these sights are a little taller than I would prefer, but I blacked them out which has helped with the sight picture being less 'busy.'

I may experiment with a different set of OR sights at some point, but experimenting gets costly, so I'd like to get some solid info first on another option that isn't quite as tall as these, but will still function as BUIS with the Venom (I don't co-witness my pistol optics).

Offline Hammer Time

  • Sr. Member
  • ****
  • Posts: 870
Re: Show me your P10 with optic. . .
« Reply #20 on: May 02, 2021, 08:40:32 PM »
Update - as mentioned above, the sights I was running before were higher than I really wanted and made the sight picture a little too busy. After checking out the height measurements for the Night Fision OR sights, I decided to try them out. Easy to mount and I really like that both the front and rear sights have set screws. I went with the "yellow" (which really seems more like neon green to me) front sight, blacked out rear. They work perfectly with the Venom, being at the very bottom of the optic window but still fully visible if I need them - exactly what I want in a BUIS that isn't co-witnessed.


Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 4593
Re: Show me your P10 with optic. . .
« Reply #21 on: May 02, 2021, 09:51:57 PM »
Thanks for the update.

Offline awmp

  • Newbie
  • *
  • Posts: 4
Re: Show me your P10 with optic. . .
« Reply #22 on: May 07, 2021, 07:04:56 PM »
I have been trying to find a P10 C Optics Ready but no luck so far. A lot of good setups in here.

Offline Maynard

  • Full Member
  • ***
  • Posts: 318
Re: Show me your P10 with optic. . .
« Reply #23 on: May 10, 2021, 06:56:56 PM »

P-10F Trijicon SRO, factory suppressor sights, local toolmaker milled the slide
P-10C Trijicon SRO, factory suppressor sights, local toolmaker milled the slide


Offline Greenbean

  • Newbie
  • *
  • Posts: 21
Re: Show me your P10 with optic. . .
« Reply #24 on: May 10, 2021, 08:18:25 PM »
What’s the co/witness area with the SRO + factory suppressor sights?

I almost purchased a P10F suppressor ready today with the though I’d just having the slide milled.

My preference is lower 1/3rd of the glass area or below.

Offline Maynard

  • Full Member
  • ***
  • Posts: 318
Re: Show me your P10 with optic. . .
« Reply #25 on: May 12, 2021, 05:07:17 AM »
What’s the co/witness area with the SRO + factory suppressor sights?

I almost purchased a P10F suppressor ready today with the though I’d just having the slide milled.

My preference is lower 1/3rd of the glass area or below.

It's very low in the FOV, definitely 1/3 or below.


Offline Greenbean

  • Newbie
  • *
  • Posts: 21
Show me your P10 with optic. . .
« Reply #26 on: May 12, 2021, 05:25:01 AM »
Thank you for posting the picture,

I have a P-09 SR coming instead....
I may just have to send it off to be milled but I wanna shoot it first and see what it's like.
« Last Edit: June 10, 2021, 07:13:52 PM by Greenbean »

Offline KineticAp1

  • Newbie
  • *
  • Posts: 17
Re: Show me your P10 with optic. . .
« Reply #27 on: June 09, 2021, 04:15:31 PM »
Posted
This pistol before with an RMR... just upgraded to the SRO for competitions






Sent from my iPhone using Tapatalk

Offline Greenbean

  • Newbie
  • *
  • Posts: 21
Re: Show me your P10 with optic. . .
« Reply #28 on: June 10, 2021, 07:15:00 PM »
That’s trick man!

Full size body and comp added to a P-10C

Well played Sir! Well played INDEED!