Author Topic: What holsters fit the P-01?  (Read 170151 times)

0 Members and 1 Guest are viewing this topic.

Offline hrdguera

  • Jr. Member
  • **
  • Posts: 65
Re: What holsters fit the P-01?
« Reply #75 on: September 21, 2015, 04:47:31 PM »
I use a Galco Jak-Slide for almost every pistol I have.
Almost, because there are few where the pistol hammer or something else bothers my "Spare Tire" just a bit.

Offline bobandmikako

  • Newbie
  • *
  • Posts: 6
P-01 fits Kramer IWB for Sig P229R
« Reply #76 on: December 29, 2015, 09:41:11 AM »
My P-01 fits nearly perfectly in a Kramer #3 IWB made for the Sig P229R.  It fits so well that I've decided to just use it instead of buying another holster for it.  Retention seems just about the same as using the holster with the P229R for which it's made.  I can hold it upside down and it won't fall out but it comes out very smoothly on the draw.  It's not an exact fit, obviously, but it works just fine.
« Last Edit: July 02, 2025, 08:27:28 AM by Wobbly »

Offline SR22PSHOOTER

  • Newbie
  • *
  • Posts: 14
Re: What holsters fit the P-01?
« Reply #77 on: April 03, 2016, 08:45:38 PM »
I really like my CnC Holster:










« Last Edit: December 14, 2022, 10:26:52 AM by Wobbly »
CZ 75 P-01

Offline crand16

  • Jr. Member
  • **
  • Posts: 25
Re: What holsters fit the P-01?
« Reply #78 on: April 27, 2016, 03:19:24 PM »
Cool how the holster pattern and grips match on the CNC holster!

Offline Low@xis

  • Jr. Member
  • **
  • Posts: 33
Re: What holsters fit the P-01?
« Reply #79 on: April 29, 2016, 07:23:55 PM »
The P01 fits nicely w/o light in the K-Rounds #2036.
Also, the P01 w/TLR-1 or TLR-1 HL fits nicely in the K-Rounds #2640

I have both and use them both in above mentioned configurations, for Glock 19 G4 and CZ75 P-01
« Last Edit: April 29, 2016, 07:27:23 PM by Low@xis »

Offline CPTKILLER

  • Full Member
  • ***
  • Posts: 359
Re: What holsters fit the P-01?
« Reply #80 on: May 27, 2016, 12:59:26 PM »
I mentioned in the Holster Section that I now have an excellent El Paso Saddlery 1942 "Tanker" Holster.  For secure Open Carry, it is hard to beat. It was made to fit my CZ PO1 and the fit, form, and function is perfect.

http://www.epsaddlery.com/pc-154-14-1942-tanker-holster-3-to-5-barrels.aspx

Offline Thebillsman

  • Full Member
  • ***
  • Posts: 233
Re: What holsters fit the P-01?
« Reply #81 on: May 29, 2016, 11:08:44 PM »
Do you guys think the new Omega will be a tough fit for normal P-01 holsters because of the ambi safety?

Offline montigre

  • Newbie
  • *
  • Posts: 14
Re: What holsters fit the P-01?
« Reply #82 on: June 05, 2016, 08:09:05 AM »
I am curious to find out which OWB holsters should fit the new Omega P-01 convertibles with the raised suppressor sights.  I just purchased the gun yesterday and have found many holsters online for the standard P-01, but none specifically that will accommodate the suppressor sights.

Any insight would be greatly appreciated.

Offline inspectagadget

  • Newbie
  • *
  • Posts: 8
Re: What holsters fit the P-01?
« Reply #83 on: June 19, 2016, 07:50:09 PM »
I really like the Vedder Holsters. They are EXTREMELY comfortable.

Offline Thebillsman

  • Full Member
  • ***
  • Posts: 233
Re: What holsters fit the P-01?
« Reply #84 on: June 19, 2016, 07:56:16 PM »
I am curious to find out which OWB holsters should fit the new Omega P-01 convertibles with the raised suppressor sights.  I just purchased the gun yesterday and have found many holsters online for the standard P-01, but none specifically that will accommodate the suppressor sights.

Any insight would be greatly appreciated.

I run an AG Cloak Tuck 3. I just got my P-01 Omega a few days ago and it fits great with the sights and ambi decocker. Being a fairly heavy carry gun the cloak tuck distributes the weight well due it's size.

Offline Rutherford2

  • Full Member
  • ***
  • Posts: 259
Re: What holsters fit the P-01?
« Reply #85 on: July 09, 2016, 09:28:41 AM »
I recently acquired a holster for the CZ P-01 with TLR-1 mounted. It is a Geaux Hard Holsters Genesis model, which is a WML appendix holster with concealment wing that ships with a Raven clip, standard over clip and soft loops with pull-the-dot fasteners.

Great fit, excellent retention and concealability. These are now my go-to EDC IWB holsters.

They were great to work with and turnaround on the custom order was about 2 weeks. They also have P07 and P09 options available.

Offline TheCZLife

  • Newbie
  • *
  • Posts: 4
Re: What holsters fit the P-01?
« Reply #86 on: July 15, 2016, 07:12:39 PM »
i just recently bought a TLR-1 for my cz p01.

is there a holster to carry a p01 with the tlr-1 attached? preferably for open carry. thanks  ;D

anyone?

I recently purchased a blue gun and had Fury carry solutions make me a holster, they should be making them now for the p-01 since I bought them the blue mold gun for them. I had them make me two holsters, one with a light (the tlr-1) and one without, they are kydex. so far I like them. hope that helps.

Offline Geared4me

  • Jr. Member
  • **
  • Posts: 43
Re: What holsters fit the P-01?
« Reply #87 on: July 31, 2016, 08:26:19 PM »
Winthrop Holsters makes a really nice owb fitted leather holster for the Glock 19 that fits my P-01 perfectly. Their craftsmanship is very good and their prices are fantastic for the quality of the product.
http://www.winthropholsters.com/glock-19-outside-the-waistband-w-shield-holster-right-handed-black-0013/

Offline CPTKILLER

  • Full Member
  • ***
  • Posts: 359
Re: What holsters fit the P-01?
« Reply #88 on: January 24, 2017, 10:11:22 PM »
https://scontent-dft4-2.xx.fbcdn.net/v/t31.0-8/15936759_10108892864031070_8231373675735912466_o.jpg?oh=a4f3ea60ec33553444225e0d9c85c80c&oe=5914522B

Forget the old guy me, that is my PO1 in a El Paso Saddlery military style shoulder holster.  This is at the Texas State Capitol.

Offline BrenToo

  • Full Member
  • ***
  • Posts: 130
« Last Edit: August 22, 2017, 04:47:51 PM by BrenToo »