I got mine two weeks ago. Put in a 13lb Wolff hammer spring and a 18lb trigger bar plunger spring, CGW trigger return spring, and polished everything. My sear/hammer engagement was very rough and gritty and took a good deal of polishing to smooth out. I typically don't mess with sear and hammer hook surfaces but this one was pretty bad. All good now. Smooth as glass. A fraction of the camming a stock CZ has. Tanfos have a much better hammer cut and Reset out of the box. Very easy to bring up to speed. 3lb 9oz SA pull after the springs and tuning. My biggest disappointment is it hits an inch+ low at 15 yards. I believe the adjustable LPA rear sight from the Elite Match will work so I'm going to find one and bring the POI up. If I really fall in love with the pistol I'll have the front sight cut down and milled for a fiber optic. Right now the pistol is good but not exceptional. I'm also getting an occasional light strike with the 13lb mainspring. This is not an issue in my two other Tanfos that are running the same spring. Maybe it needs some more break in. I initially had a few FTE issues where the extractor was not pulling the spend round out of the chamber. A good soaking with oil cured that. Definitely worth what I paid but not up to par with my 1994 EA9L compact as far as overall quality.
