lol last time we had a thread like this it went south...thankfully we now have 922R compliant kits available!
Akuser47, what bag is that you have your evo in?
Akuser47, what bag is that you have your evo in?Condor compact assault pack I had it laying around new. It works not perfect, but it has a use now. I like it
Sent from my iPhone using Tapatalk
Question,
Buying a Scorpion as a pistol, just what can you do to it and keep it a pistol?
A stock and foregrip are understood SBR mods.
I know you can get grips [for an AR] that go on the frame where barrel meets - and covers magwell. I don't think those count toward SBR, right?
You should see the black holes in my bank account! :)
I believe a stock is the only thing that makes it a SBR.
Not exactly.....put a vertical forearm grip on a pistol and you are NFA as a AOW !!
Sent from my iPad using Tapatalk HD
Thanks for the info, do you have a link to that?I believe a stock is the only thing that makes it a SBR.
Not exactly.....put a vertical forearm grip on a pistol and you are NFA as a AOW !!
Sent from my iPad using Tapatalk HD
Never say "Final Configuration." New eyes, light and grip.
(http://i214.photobucket.com/albums/cc115/marcoc74/ae4a6f05-2ed4-42dd-bed0-76efdfcf03ac.jpg)
From Wiki,
The BATFE Firearms Technology Branch has issued opinions that when a pistol (such as an AR-type pistol) is fitted with a vertical fore-grip, it is no longer "designed, made and intended to fire ... when held in one hand," and therefore no longer meets the definition of a pistol. Such a firearm then falls only within the definition of "any other weapon" under the NFA.[9]
This was before I had the stock on there.are you using a thread adapter or did you re thread the barrel?
(http://i62.photobucket.com/albums/h113/Seed_of_Ares/Guns/CZ%20Scorpion%20EVO%20III/VZM.IMG_20151019_153709_zpsiz9d0sze.jpg)
Crappy iPhone pic. I'll SBR it one day but for now the brace works just fine.
(http://i107.photobucket.com/albums/m316/QuickShotxMLx/image%205_zpsjsrf8ors.jpeg)
The first time I took it to the range it was almost unbearable. Perhaps I'm being overly dramatic but it really did detract from the experience. After that I took a dremel to the safety and never looked back.
How is the safety digging into the finger issue, with the Shockwave. Is it an issue with this setup?
Howsabout this one? No my photo, obviously... 8)
(http://i16.photobucket.com/albums/b13/armoredman/CZ%20posters/21616_10204166438321091_864567839849075946_n_zpsjcgdjl5e.jpg) (http://s16.photobucket.com/user/armoredman/media/CZ%20posters/21616_10204166438321091_864567839849075946_n_zpsjcgdjl5e.jpg.html)
Howsabout this one? No my photo, obviously... 8)
(http://i16.photobucket.com/albums/b13/armoredman/CZ%20posters/21616_10204166438321091_864567839849075946_n_zpsjcgdjl5e.jpg) (http://s16.photobucket.com/user/armoredman/media/CZ%20posters/21616_10204166438321091_864567839849075946_n_zpsjcgdjl5e.jpg.html)
Howsabout this one? No my photo, obviously... 8)
(http://)[/URL]
What optic is that?
Just got back from the laser engraver. SBR'd with M-Lok forend, SE flat trigger, and Octane 45HD. 16" AR-15 for size comparison. Definitely needs a steeper grip from YetiWurks.
(http://i18.photobucket.com/albums/b129/earlan357/File%20Jan%2009%201%2013%2057%20PM.jpeg)
Just got back from the laser engraver. SBR'd with M-Lok forend, SE flat trigger, and Octane 45HD. 16" AR-15 for size comparison. Definitely needs a steeper grip from YetiWurks.
(http://i18.photobucket.com/albums/b129/earlan357/File%20Jan%2009%201%2013%2057%20PM.jpeg)
Where did you get the Mlok Forend??
No, I'm friends with the owner of RDRHolsters.com. He makes the best kydex holsters and mag pouches I've ever used. I dropped off a couple mags and he put that together for me.
Can you really co-witness the sights with that Bushnell?
Here's the picture:Nice pic I've tried to take the same pic of my sparc 2 as it is 100% cowitness but cannot get that shot lol
(http://i83.photobucket.com/albums/j313/Border_Dave/Firearms/DSCF0847_zpsjerzh9v8.jpg)
Nice pic I've tried to take the same pic of my sparc 2 as it is 100% cowitness but cannot get that shot lolLOL. Believe me, it wasn't easy!
How do you like that AK style safety?
(https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xfa1/v/t1.0-9/13055365_1323332654348583_6959572303756593162_n.jpg?oh=ebc6cf54fd27da9c943dde6226e2ec0c&oe=57B6A457)
(https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xfa1/v/t1.0-9/13055365_1323332654348583_6959572303756593162_n.jpg?oh=ebc6cf54fd27da9c943dde6226e2ec0c&oe=57B6A457)
(https://scontent.fsnc1-1.fna.fbcdn.net/v/t1.0-9/13087854_1323332677681914_8662728714008039457_n.jpg?oh=b11b90d53549968584d7e9b120148d06&oe=57AA94E6)
(https://scontent.fsnc1-1.fna.fbcdn.net/v/t1.0-9/13043510_1323333184348530_3630368140183127359_n.jpg?oh=f82bae978e46a9c467dd01e4fdf267b8&oe=57BBE9A6)
Not to clutter the thread, but, The first of it's kind! Production sample of the modular Hand guard! 2 piece design utilizing MP5 HG push pins, Some pictured with Barrel extension and some pics of Omega 9k with 3 lug Adapter. Got this in today and going to do some QA testing on it stay tuned.
Not to clutter the thread, but, The first of it's kind! Production sample of the modular Hand guard! 2 piece design utilizing MP5 HG push pins, Some pictured with Barrel extension and some pics of Omega 9k with 3 lug Adapter. Got this in today and going to do some QA testing on it stay tuned.
What's the scoop on the pistol grip?
The CZ Scorpion SBR gets hassled by some of the older residents of the gun safe - just for being new and "different" and .... not German (or Israeli) ... The quiet tragedy that is - SMG bullying...THAT is a nice shorty collection! Kudos
(http://i404.photobucket.com/albums/pp125/matthewrgill/Gun%20Collection/SMG%203_edited-1_zpsj319kyqr.jpg)
In all seriousness, the Scorpion has proven to be a great addition to my SMG collection. Probably my favorite class of weapon in my gun collection.
Enjoy. Matt
Guess I won't be posting my picts with reviews. Having to sign up for photo dump service sucks and it keeps wanting to install stuff on my computer I don't want. No thanks. Please fix this to remove the middle man. >:(
Guess I won't be posting my picts with reviews. Having to sign up for photo dump service sucks and it keeps wanting to install stuff on my computer I don't want. No thanks. Please fix this to remove the middle man. >:(
Found this........ :o ;D
(http://www.shwiggie.com/contents/uploads/2015/06/scorp4.jpg)
Cause why the #$%& not!
(https://hbindustries.net/store/wp-content/uploads/2016/06/DSC_0720-e1466646342846.jpg)
The red mag release and selector are not production parts, we just did a couple to see how they might look :-)
(https://hbindustries.net/store/wp-content/uploads/2016/07/DSC_0724-e1469235938966.jpg)
These carbines are a blast!!! Is anyone else running one? What do you think? More fun than a 9mm AR?
(http://www.sonic.net/~claudel/scorpion-01.jpg)
I prefer the sling to dealing with the bureaucracy to SBR it.
Seems to be steady, and the sights align naturally when I bring it to firing position.
Only things I've changed so far are the right side safety ( deleted ) and the trigger spring.
Someday this year the muffler will be out of NFA jail...
New member here, would like to contribute with a picture of my FDE Evo...
Not sure how you are all including photos...do I need to host them somewhere then link to them?
Thanks...this site has been a great resource for me.
A firearm coating based on a Stuka...now that's a wild connection. Wonder if any are left flying?Not too much snow outside Phoenix. It should be 112 or so today. I just wanted something different and I think we achieved different.
That looks great, lots of snow up by you?
Interesting..I've been contemplating on putting a pistol length handguard on my carbine w/ a faux suppressor.
Would you happen to have a pic of it with the pistol length handguard and faux suppressor?
Dang that's quite the barrel sticking out of that gun.
YESSSSS!!!! BiggerHammer is bringing the originality! Nicely done!
(http://i941.photobucket.com/albums/ad257/bonestock_Wood/CZ%20Scorpion_zps3tiz8ebn.jpg)
I kinda like that look...:)
How about a pisto-bine :o?
...
-Fire selector detents reshaped and polished to ease fire/safe required effort. I have a set of HB AR type selectors but I really like the factory Scorpion's selectors. After performing the work on the detents, they perform quite nicely. This made a world of difference.
...
On my way home with it...
(https://dl.dropboxusercontent.com/u/40800955/2016-08-23%2014.25.36.jpg)
How about a pisto-bine :o?
...
-Fire selector detents reshaped and polished to ease fire/safe required effort. I have a set of HB AR type selectors but I really like the factory Scorpion's selectors. After performing the work on the detents, they perform quite nicely. This made a world of difference.
...
I'm curious about what kind of reshaping you did here. Sounds like a great idea. Have any more details or Pics of this?
What is that on the right side? :o
How about a pisto-bine :o?
...
-Fire selector detents reshaped and polished to ease fire/safe required effort. I have a set of HB AR type selectors but I really like the factory Scorpion's selectors. After performing the work on the detents, they perform quite nicely. This made a world of difference.
...
I'm curious about what kind of reshaping you did here. Sounds like a great idea. Have any more details or Pics of this?
Here you go. Basically, I just reduced the height of and smoothed the peak of the center hump between the "FIRE" and "SAFE" grooves on the selector shaft. Warning: Do not alter your selector shaft or any other components on any firearm if you are not a competent gunsmith. Any alterations are at your own risk. This post is simply to inform you of what I did to my firearm and is in no way meant to serve as advise or recommendations to anyone.
(http://i1367.photobucket.com/albums/r795/greankrayon/DC138DB5-68D3-4027-A800-3F9CC3874BAE_zpshfipz3hs.jpg) (http://s1367.photobucket.com/user/greankrayon/media/DC138DB5-68D3-4027-A800-3F9CC3874BAE_zpshfipz3hs.jpg.html)
(http://i1367.photobucket.com/albums/r795/greankrayon/C8EDD726-3EF1-43CC-8757-6FC112BE76FA_zpsakrgihyy.jpg) (http://s1367.photobucket.com/user/greankrayon/media/C8EDD726-3EF1-43CC-8757-6FC112BE76FA_zpsakrgihyy.jpg.html)
(http://i1367.photobucket.com/albums/r795/greankrayon/DC138DB5-68D3-4027-A800-3F9CC3874BAE_zpshfipz3hs.jpg) (http://s1367.photobucket.com/user/greankrayon/media/DC138DB5-68D3-4027-A800-3F9CC3874BAE_zpshfipz3hs.jpg.html)
(http://i1367.photobucket.com/albums/r795/greankrayon/C8EDD726-3EF1-43CC-8757-6FC112BE76FA_zpsakrgihyy.jpg) (http://s1367.photobucket.com/user/greankrayon/media/C8EDD726-3EF1-43CC-8757-6FC112BE76FA_zpsakrgihyy.jpg.html)
[/quote
Who makes this muzzle device? Just what I'm looking for.
http://www.czfirearms.us/index.php?topic=81008.0 See Greankrayon's post, and mine toward the end of the thread.
Welcome to the club !!! U r going to luv ur Scorpion !!!
Sent from my iPhone using Tapatalk
(http://i1367.photobucket.com/albums/r795/greankrayon/DC138DB5-68D3-4027-A800-3F9CC3874BAE_zpshfipz3hs.jpg) (http://s1367.photobucket.com/user/greankrayon/media/DC138DB5-68D3-4027-A800-3F9CC3874BAE_zpshfipz3hs.jpg.html)
(http://i1367.photobucket.com/albums/r795/greankrayon/C8EDD726-3EF1-43CC-8757-6FC112BE76FA_zpsakrgihyy.jpg) (http://s1367.photobucket.com/user/greankrayon/media/C8EDD726-3EF1-43CC-8757-6FC112BE76FA_zpsakrgihyy.jpg.html)
[/quote
Who makes this muzzle device? Just what I'm looking for.
http://www.czfirearms.us/index.php?topic=81008.0 See Greankrayon's post, and mine toward the end of the thread.
Thanks!!!!
"Ex Umbris Venimus"
The wife's new toyNice toy !!!
(http://i666.photobucket.com/albums/vv27/dukeyjoe_2009/IMG_1829%20copy.jpg)
(http://i666.photobucket.com/albums/vv27/dukeyjoe_2009/IMG_1818%20copy.jpg)
Not sure how you are all including photos...do I need to host them somewhere then link to them?\
That's awesome, nice pictures and love the red/black contrast. :) The Scorpion King and Queen!
And the very happy coupleQuestion: I see the shockwave and I also see the foregrip. Does that grip make this weapon a SBR now? When you take it off are you now making a "pistol"?
(http://i666.photobucket.com/albums/vv27/dukeyjoe_2009/IMG_1846%20copy.jpg)
Final form (for awhile)
Picked up a Holosun and a couple more 20 rnd mags from the JoeBob sale. All it needs now is a CZC trigger job.
(http://i120.photobucket.com/albums/o173/mesabill/image_zpstyen3fmr.jpeg) (http://s120.photobucket.com/user/mesabill/media/image_zpstyen3fmr.jpeg.html)
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/752903BA-5AFE-4D82-9D97-046A80E90822.jpg)
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/8B3B1841-DF96-492E-AC5B-477ABFED8CAC.jpg)
Pretty much final configuration with the new muzzle device and Yeti Wurks mag release and +3 mag extension. Only thing missing is the new grip. Waiting for it to return from Cerakote.
"Ex Umbris Venimus"
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/752903BA-5AFE-4D82-9D97-046A80E90822.jpg)Very sweet one !!!
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/8B3B1841-DF96-492E-AC5B-477ABFED8CAC.jpg)
Pretty much final configuration with the new muzzle device and Yeti Wurks mag release and +3 mag extension. Only thing missing is the new grip. Waiting for it to return from Cerakote.
"Ex Umbris Venimus"
Beautiful!!!
Very sweet one !!!
Sent from my iPad using Tapatalk
As far as sealing goes, you can use duracoat or ceracoat. They have a final finish clear coat for people to apply a smooth finish over their custom camo design. It usually comes in a spray can with options from a flat matte to a high gloss.
You could even just go to your local hardware store and pick up a spray can of rustoleum/krylon oil based clear coat. Again, offered from matte to gloss.
This got me thinking...could you apply a temp tattoo and seal it with a clear coat as well?
Yes you can: https://temporarytattoos.com/blog/temporary-tattoos-not-your-average-decorating-tool/
And now the scorpion, pick your poison: https://temporarytattoos.com/catalogsearch/result/?q=scorpion
This was just a random site on Google, but it did answer my question and they do have scorpion tats
(https://temporarytattoos.com/pub/media/catalog/product/cache/1/image/700x560/e9c3970ab036de70892d86c6d221abfe/g/r/gray-scorpion-temporary-tattoo_ani-32.jpg)
Nice paint job by the way
Greetings,
I just wanted to take the time to introduce my self to the forum and figured sharing my Scorpion would be a fantastic way to do so.
The forum has truly been a great resource and has helped me learn a great deal. The Scorpion has been my dream gun since its release . Thanks to all of you who have contributed to schooling me; as, now that i finally own one, I feel i have the required knowledge to care for it and realize the potential that the firearm has to offer.
<3 from oregon
(http://i79.photobucket.com/albums/j142/thirteenmoons/Mobile%20Uploads/image_1.jpeg) (http://s79.photobucket.com/user/thirteenmoons/media/Mobile%20Uploads/image_1.jpeg.html)
Sent from my iPhone using Tapatalk
Greetings,
I just wanted to take the time to introduce my self to the forum and figured sharing my Scorpion would be a fantastic way to do so.
The forum has truly been a great resource and has helped me learn a great deal. The Scorpion has been my dream gun since its release . Thanks to all of you who have contributed to schooling me; as, now that i finally own one, I feel i have the required knowledge to care for it and realize the potential that the firearm has to offer.
<3 from oregon
(http://i79.photobucket.com/albums/j142/thirteenmoons/Mobile%20Uploads/image_1.jpeg) (http://s79.photobucket.com/user/thirteenmoons/media/Mobile%20Uploads/image_1.jpeg.html)
Sent from my iPhone using Tapatalk
Welcome to the forum AND the addiction! You will nee a P-09 to go with that Scorpion, you know. ;)
Greetings,
I just wanted to take the time to introduce my self to the forum and figured sharing my Scorpion would be a fantastic way to do so.
The forum has truly been a great resource and has helped me learn a great deal. The Scorpion has been my dream gun since its release . Thanks to all of you who have contributed to schooling me; as, now that i finally own one, I feel i have the required knowledge to care for it and realize the potential that the firearm has to offer.
<3 from oregon
(http://i79.photobucket.com/albums/j142/thirteenmoons/Mobile%20Uploads/image_1.jpeg) (http://s79.photobucket.com/user/thirteenmoons/media/Mobile%20Uploads/image_1.jpeg.html)
Sent from my iPhone using Tapatalk
Welcome to the forum AND the addiction! You will nee a P-09 to go with that Scorpion, you know. ;)
hah... next up is folding stock adapter.. then form 4 and a k stock!
Sent from my iPhone using Tapatalk
Greetings,
I just wanted to take the time to introduce my self to the forum and figured sharing my Scorpion would be a fantastic way to do so.
The forum has truly been a great resource and has helped me learn a great deal. The Scorpion has been my dream gun since its release . Thanks to all of you who have contributed to schooling me; as, now that i finally own one, I feel i have the required knowledge to care for it and realize the potential that the firearm has to offer.
<3 from oregon
(http://i79.photobucket.com/albums/j142/thirteenmoons/Mobile%20Uploads/image_1.jpeg) (http://s79.photobucket.com/user/thirteenmoons/media/Mobile%20Uploads/image_1.jpeg.html)
Sent from my iPhone using Tapatalk
Welcome to the forum AND the addiction! You will nee a P-09 to go with that Scorpion, you know. ;)
hah... next up is folding stock adapter.. then form 4 and a k stock!
Sent from my iPhone using Tapatalk
Did you buy it as a pistol? If so, I believe you need to file on a Form 1 and not a 4...if you're referring to SBR'ing it.
As was said...welcome to the addiction!
Does anyone have pictures of a FDE evo 3 with a FDE shockwave blade? Would like to know if they colors match.
(http://i.imgur.com/uyjWjhY.jpg?3)
Picked this up last weekend, only have a couple of minor add-ons so far. The BCM Gunfighter Mod 3 is so accommodating to the way I hold long arms that I'm planning to swap the RVG I have on my AR to one as well. I also put a Magpul M-LOK handstop on the front end because I felt the Scorpion looked naked without its "stinger."
Sorry for the poor-quality photo; good lighting is hard to come by in my apartment once the sun goes down.
Valk, I have to agree, that photo looks great, as does your Scorpion, of course.
Mine just arrived at my local FFL moments ago, and I get to see it Friday night...
EDIT / ADD: The "BCM Gunfighter Mod 3" is for the Bravo Company line, right? Sorry for the ignorant question...
This looks to be it here:
http://www.bravocompanyusa.com/BCMGUNFIGHTER-Vertical-Grip-Mod3-1913-Black-p/bcm-vg-1913-mod-3-blk.htm
Thanks for the kind words - the lighting *effects* look nice, but the general poor quality lighting is what's causing the photo to look all nasty and grainy due to the high ISO my phone throws on it. For comparison, this is a quickie I shot of my new Glock 19 with my iPhone with good, direct lighting, a much lower ISO, and a simple filter for that moody look ;D: http://i.imgur.com/5k1M4ET.jpgValk, I have to agree, that photo looks great, as does your Scorpion, of course.
Mine just arrived at my local FFL moments ago, and I get to see it Friday night...
EDIT / ADD: The "BCM Gunfighter Mod 3" is for the Bravo Company line, right? Sorry for the ignorant question...
This looks to be it here:
http://www.bravocompanyusa.com/BCMGUNFIGHTER-Vertical-Grip-Mod3-1913-Black-p/bcm-vg-1913-mod-3-blk.htm
Yep, that's the one. I originally considered putting a Magpul M-LOK MVG on the Scorpion, but figured I'd try the Gunfighter since I wanted to try it on my AR as well (I have a cantilevered flashlight that encourages me to tilt my support hand forward on that gun). Turns out it feels better than the MVG in basically every way to me just because of that slight angle, so I left it on the Scorpion and ordered a second one for my AR. (I ended up with two Aimpoint H-1s last month in the same way.) There's also a "standard" Gunfighter grip that has integrated storage and a "broomstick" variant, but I don't really need either of those things and don't consider the additional $20 I'd pay worth it for either anyway. If you want to try one of the grips out yourself, I'd recommend ordering through AIM Surplus, who has them in a variety of colors and offers free shipping on all their BCM stuff.
Only downside to the Gunfighter is that BCM is wholly committed to Keymod since they more or less pioneered it, and that means no M-LOK versions of their accessories. Mine is attached to a 5-slot polymer M-LOK rail. The Gunfighter Mod 3 is juuuust long enough that one end of the 5-slot rail pokes out (you can see it in the front), and the other end of the grip hangs over the back end of the rail, leaving a small gap between the grip and the handguard. Annoying, but I can live with it.
Sigma05. That is very sharp. Is that a krinkov style muzzle break on there, and if so, did it change your point of impact? Just wondering, because I have one myself that I was going to put on mine, but when I had it on my AR pistol, it changed the POI so much that I didnt feel like messing with it and removed.
Cool. I took the cone out of mine because it's supposed to be for 556, and not willing to take the chance it wont clear 9mm. Enjoying everyones pictures. Keep them coming.
Here is mine with its shorter cousin.
(http://i178.photobucket.com/albums/w259/hyryz/GENERAL%20PICTURES/sbrs.jpg)
Here is mine with its shorter cousin.
(http://i178.photobucket.com/albums/w259/hyryz/GENERAL%20PICTURES/sbrs.jpg)
Hey there,
The front end of the sbr is very unique .. would you mind listing a parts detail?
(Apologies for derailing the thread a lil-bit)
Sent from my iPhone using Tapatalk
The wife's new toy
(http://i666.photobucket.com/albums/vv27/dukeyjoe_2009/IMG_1829%20copy.jpg)
(http://i666.photobucket.com/albums/vv27/dukeyjoe_2009/IMG_1818%20copy.jpg)
(http://uploads.tapatalk-cdn.com/20160725/0785f210bfddaad3b0c14e5cc90e2383.jpg)
I've posted pics of my Scorpion before but i changed out optics so i figured I'd update. Took the Vortex Sparc II off and put a Burris Fastfire III on an ADM QD mount with a Burris speedbead 1/4" spacer. Field of view is much improved and so is cowitness with the Troy micro sights.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Best scorpion pic in this thread by far. Anyone know what kind of pistol grip that is?Thank you for the compliment!! The vertical grip is a Troy Industries aluminum modular grip, the pistol grip is a Yeti Werks - Everest.(http://uploads.tapatalk-cdn.com/20160725/0785f210bfddaad3b0c14e5cc90e2383.jpg)
I've posted pics of my Scorpion before but i changed out optics so i figured I'd update. Took the Vortex Sparc II off and put a Burris Fastfire III on an ADM QD mount with a Burris speedbead 1/4" spacer. Field of view is much improved and so is cowitness with the Troy micro sights.
Sent from my SAMSUNG-SM-G930A using Tapatalk
(http://www.fototime.com/D5C7A15F18E0198/medium800.jpg)
*cough* BREN *cough*... 8)
Nice! I've had an itch for a SCAR 17 or FAL Para that I have been wanting to scratch.
Just got the Form 1 back on Friday...Sweet set up !!! Congrats
(http://people.virginia.edu/~rjs7m/Guns/Scorp-sbr-1.jpg)
(http://people.virginia.edu/~rjs7m/Guns/Scorp-sbr-2.jpg)
(http://people.virginia.edu/~rjs7m/Guns/Scorp-sbr-3.jpg)
Messer, which adapter is that for the Yugo?
Just got the Form 1 back on Friday...Sweet set up !!! Congrats
(http://people.virginia.edu/~rjs7m/Guns/Scorp-sbr-1.jpg)
(http://people.virginia.edu/~rjs7m/Guns/Scorp-sbr-2.jpg)
(http://people.virginia.edu/~rjs7m/Guns/Scorp-sbr-3.jpg)
Sent from my iPad using Tapatalk
Nice! Is the length of this stock extended longer than the CZ 922r folding stock and by how much? Thanks.
Sent from my iPad using Tapatalk
(http://uploads.tapatalk-cdn.com/20161115/0c8e0fdac569e030a5ca77f1dfd0f674.jpg)
Sent from my SM-G930V using Tapatalk
Love it. HB Industries AK safety is on the other side.(http://uploads.tapatalk-cdn.com/20161115/0c8e0fdac569e030a5ca77f1dfd0f674.jpg)
Sent from my SM-G930V using Tapatalk
How do you like the Apex safety?
(https://hbindustries.net/store/wp-content/uploads/2016/11/HBI-MICRO-K-SCORPION-HANDGUARD-2-e1479165161724.jpg)
Finally got my form 1 back and installed 922r kit. Also have a Burris FF zeroed.
(http://i1077.photobucket.com/albums/w464/GoldTop556/Mobile%20Uploads/2016-11/IMG_20161105_091940459_zps7igfpop3.jpg) (http://s1077.photobucket.com/user/GoldTop556/media/Mobile%20Uploads/2016-11/IMG_20161105_091940459_zps7igfpop3.jpg.html)
I'll get better pics at the range soon!
Sent from my XT1254 using Tapatalk
Who makes that VFG?That's a HK Parts stubby VFG. https://www.hkparts.net/shop/pc/Vertical-Grip-HK-Style-Stubby-138p16409.htm (https://www.hkparts.net/shop/pc/Vertical-Grip-HK-Style-Stubby-138p16409.htm)
Finally got my form 1 back and installed 922r kit. Also have a Burris FF zeroed.
(http://i1077.photobucket.com/albums/w464/GoldTop556/Mobile%20Uploads/2016-11/IMG_20161105_091940459_zps7igfpop3.jpg) (http://s1077.photobucket.com/user/GoldTop556/media/Mobile%20Uploads/2016-11/IMG_20161105_091940459_zps7igfpop3.jpg.html)
I'll get better pics at the range soon!
Sent from my XT1254 using Tapatalk
Added this little bad boy on tonight, gonna sight in tomorrow morning. It's a Sig Sauer Romeo 4c. So far I love this thing!Co-witness?
(http://uploads.tapatalk-cdn.com/20161120/54df106a2542fc46c1430dd09164de61.jpg)
Sent from my SM-G930V using Tapatalk
Barely lower 1/3 cowitness. Gotta cram your face nice and tight in the stock to see it.Added this little bad boy on tonight, gonna sight in tomorrow morning. It's a Sig Sauer Romeo 4c. So far I love this thing!Co-witness?
(http://uploads.tapatalk-cdn.com/20161120/54df106a2542fc46c1430dd09164de61.jpg)
Sent from my SM-G930V using Tapatalk
Is someone working on some flip up back up sights for the scorpion that would be an absolute cowitness with low profile mounts?
Sent from my SM-G930V using Tapatalk
Show it off amigo, it's unique because it's all yours! 8)Manticore Arms
KevGuillot, that is an eCZellent extended charging handle, what is it?
Picked it up yesterday but didn't get home until dark. Nothing y'all haven't seen before of course, but I'm pretty pumped. Ran 50 rounds thru it while doing some work outside today, zero problems as expected.
(http://uploads.tapatalk-cdn.com/20161210/9d606bd1079bb67ca27359c510da84ee.jpg)
(http://uploads.tapatalk-cdn.com/20161210/9d606bd1079bb67ca27359c510da84ee.jpg)
VFG on pistol=BAD juju...
just saying...
VFG on pistol=BAD juju...
just saying...
You're totally right, and the VFG is already reinstalled on its real home. Back in the safe with the pistol. :-\
(http://uploads.tapatalk-cdn.com/20170106/3ed2e325662b21609d381bb34cd604c6.jpg)I don't think there is anything left to suggest....she looks amazing....how does she shoot ?
Can't stop tweaking with mine!
So far:
HBi reduced trigger spring kit
HBi AK safety
HBi mini AK safety (left side)
CZ Custom MKII Blue compensator
Aeon tac flat serrated copper trigger
Manticore Arms extended charging handle
YetiWurks FDE switchback grip
YetiWurks avalanche mag release (raw/bronze)
Magpul FDE AFG
Primary Arms micro red dot
UTG handguard covers
In transit:
Manticore Arms sliding stock!
Also have the carbine handguard that I plan to put on once I get all my paperwork straight and can purchase a SilencerCo Omega 9k (fell in love with the look from MAC's video and impressed with the review)
Any other suggestions??
Sent from my SAMSUNG-SM-G935A using Tapatalk
(http://i.imgur.com/7NW6TiN.jpg)
HBI Theta Forward trigger
HBI AK Style Safety
HBI Trigger springs
HBI K handguard
Gear Head Works mag release
Yeti Wurks Switchback grip
Sig Sauer Hand Stop
Holosun HS503C
^Nice! @Tosb that handstop is a great idea.
There s special process in getting the sig handstop to work?
Yea how'd you get the Sig hand stop to work? Pics of work requires? Thanks
^Nice! @Tosb that handstop is a great idea.
Thanks, I'm not so patiently waiting on your new polymer extended charging handle.There s special process in getting the sig handstop to work?Yea how'd you get the Sig hand stop to work? Pics of work requires? Thanks
So when I saw that sig handstop it was exactly what I was looking for only issue is it was Keymod only and currently HBI only makes mlok rails.
so after comparing some of my magpul mlok to picatinny rails to the attachment point of the keymod sig grip I figured it was worth a shot (the grip was only $30)
(https://www.rainierarms.com/media/product/2ce/sig-sauer-fore-grip-hand-stop-keymod-grip-hs-keymodblk-by-sig-sauer-332.jpg)
(http://i.imgur.com/sosISXa.png)
This is pretty much where i made cuts there was a lot of measuring / cutting / test fitting / cutting again. I used a dremmel with one of the sanding bits to melt/cut away the extra plastic.
(http://i.imgur.com/u93qtjJ.jpg)
note I did have to take some material off the back end other wise it would over overlapped the lower and blocked me from taking it down without removing the handstop
I picked up some longer bolts also, the mlok ones I had laying around just BARLEY engaged the mlok nuts and I wanted some more grab. I also had to drill out the holes a tiny bit, aparently mlok uses bigger bolts then keymod.
Now before someone chimes in an says something about that not being a secure/safe attachment I can push my full body weight (250lbs) against the hand stop and it doesn't budge I also used some loctite blue on the screws just encase.
(http://i268.photobucket.com/albums/jj2/medphys3/E4E29A5D-DE42-45BE-90A2-0E1A66A3EBE6_zpscpal5yps.jpg)
(https://uploads.tapatalk-cdn.com/20170211/a8fa58bac3ccf00bade4f5bb1b27cc05.jpg)
(https://uploads.tapatalk-cdn.com/20170215/12331e8bb7a4aa4645078edaf58bc61c.jpg)(https://uploads.tapatalk-cdn.com/20170211/a8fa58bac3ccf00bade4f5bb1b27cc05.jpg)
bleep those Shooters element mag releases look sexy, bleepit now I gotta sell my gearhead works >:(
Current setup after receiving back my form 1:Love it and how's that Po9 I'm wanting one of those really bad as well. Some day
(http://i1077.photobucket.com/albums/w464/GoldTop556/Mobile%20Uploads/2016-11/IMG_20161121_105415007_zpsqqripqnj.jpg) (http://s1077.photobucket.com/user/GoldTop556/media/Mobile%20Uploads/2016-11/IMG_20161121_105415007_zpsqqripqnj.jpg.html)
Sent from my XT1254 using Tapatalk
(https://uploads.tapatalk-cdn.com/20170306/90cdb0cd98c4aa3eb121857ff9bbefce.jpg)(https://uploads.tapatalk-cdn.com/20170306/606846c50e33d9e6e7e2b14f50ad3714.jpg).Full auto Scorpion!? How the hell are you so lucky to have that?
Sent from my iPhone using Tapatalk
Easy. Courtesy of PhotoShop. I was wondering if anyone would catch it. It's still an S1.(https://uploads.tapatalk-cdn.com/20170306/90cdb0cd98c4aa3eb121857ff9bbefce.jpg)(https://uploads.tapatalk-cdn.com/20170306/606846c50e33d9e6e7e2b14f50ad3714.jpg).Full auto Scorpion!? How the hell are you so lucky to have that?
Sent from my iPhone using Tapatalk
Full auto Scorpion!? How the hell are you so lucky to have that?Easy. Courtesy of PhotoShop. I was wondering if anyone would catch it. It's still an S1.
Finally got my stamp a couple weeks ago. Still waiting for my can to get out of Nfa jail so took some pictures with one of my muzzle extensions with both pistol and carbine handguards. Not sure why you'd want one with a pistol handguard but hey what the heck. I'm no photographer so forgive the picture quality
Hmm...if you painted the two round burst and full auto on above the trigger guard, would people freak out? Just thinking out loud....They shouldn't since it's just paint. If they do, who cares...LOL
You guys have some nice setups! I really wish I'd bought the Shockwave...waiting for the Tailhook.
Nice! The Spitfire is my favorite optic. It works awesome on the Scorpion.
Finally got good pictures with one of my fake suppressors. This one is finished in alodine and paint.
(https://uploads.tapatalk-cdn.com/20170311/0bfd92bafbcfb52a15cd30ef4276638e.jpg)
(https://uploads.tapatalk-cdn.com/20170311/ec8c31fd7b0f34dc15b0cd25a02f7ecf.jpg)
(https://uploads.tapatalk-cdn.com/20170311/7b701ab54d654134ee3bf5f000321c9c.jpg)
(https://uploads.tapatalk-cdn.com/20170311/e0843c38222193dac008a3e0a0e49206.jpg)
Nate
NAAH Tool Works
Naahtoolworks.com
Naahtoolworks@gmail.com
Been lurking and drooling. Time to show mine!Nice Scorpion. Did you have to use the mount for the Razor?
Broke it down to the blaster with the Yeti switchback. Getting the barrel but off was easily the hardest "gunsmithing" project I've ever done:
(https://uploads.tapatalk-cdn.com/20170322/913dc83a994996267e63e7237a1fcb9e.jpg)
Cleaned up the rails with a drill press and mill vise:
(https://uploads.tapatalk-cdn.com/20170322/f70a37a0c9dda7a63d11e72f92216eb1.jpg)
But settled on the longer hand guard:
(https://uploads.tapatalk-cdn.com/20170322/b61fab0f8e51de563e3c758a60cc5ad0.jpg)
Monopod was only on to help sandbags site in the Vortex Razor red dot:
(https://uploads.tapatalk-cdn.com/20170322/3773d6a534572c2c11665b239c3922ff.jpg)
With the ADM mount:
(https://uploads.tapatalk-cdn.com/20170322/7fa097faa3e0b63b597de7d91bb0c7db.jpg)
And reversed the Shooter's Element charging handle:
(https://uploads.tapatalk-cdn.com/20170322/a9e798304ef2f28bcdc0ad569dafc5c1.jpg)
Parker mountain machine front QD mount gets close to the knuckle when charging, but its avoidable.
I was really hoping to have a whole gun without Magpul products, but decided on their mlok AFG. Also had CZ Custom trigger and Gearhead works reversed safety on right side. Waiting for the Shooter's Element mag release to come back in stock and the tailhook from GHW. Used NAH tools 3 lug adapter abd couldn't have built this without it. Looking to add threads at the end of the 3 lug male mount to add the forward compensator without taking off the mount anymore for unsuppressed. Now I see why some people have two! Suppressor is form 1 with Gemtech mount. Something like the Military Arms Channel suppressor with the Omega 9K direct threaded on is probably the cleanest look I've seen.
Sent from my iPhone using Tapatalk
Nice Scorpion. Did you have to use the mount for the Razor?
No. Razor stock mount worked fine but it was almost a lower 1/3 cowitness and I wanted a clear window. ADM quick release mount brought it up a tiny bit. Also, I stripped the stock radon screws and had to drill down he mount off. ADM is solid and flush all around.Nice Scorpion. Did you have to use the mount for the Razor?
Sent from my iPhone using Tapatalk
The Scorp is such an accurate, reliable, fast and fun gun, I'm surprised there aren't more guys here using it in USPSA
Batt how do you like the Sparc 2 on it? thinking about one for mine.Haven't shot it yet. Last nights match was going to be the first time. Even before zeroing it.
Finally got my parts installed and did a little polishing...
HBI spring kit
Theta Forward Trigger
Duckbill mag release
PMM Safeties
Vortex SPARC II
https://phitz.com/collections/strings-mandolinFinally got my parts installed and did a little polishing...
HBI spring kit
Theta Forward Trigger
Duckbill mag release
PMM Safeties
Vortex SPARC II
Nice case!
Info? Link?
https://phitz.com/collections/strings-mandolinFinally got my parts installed and did a little polishing...
HBI spring kit
Theta Forward Trigger
Duckbill mag release
PMM Safeties
Vortex SPARC II
Nice case!
Info? Link?
Sent from my iPhone using Tapatalk
This was before I had the stock on there.What qd mount do you have on your optic?
(http://i62.photobucket.com/albums/h113/Seed_of_Ares/Guns/CZ%20Scorpion%20EVO%20III/VZM.IMG_20151019_153709_zpsiz9d0sze.jpg)
(https://uploads.tapatalk-cdn.com/20170330/0ddacd66f84a3aa8513cb76445074baa.jpg)(https://uploads.tapatalk-cdn.com/20170330/b71c435e89a94b83f178c74386374800.jpg)
Finally finished adding everything I wanted to complete my Scorpion FDE:
-KAK Shockwave Blade
-Lage right folding mechanism, 5 degree cant
-Yeti Wurks Switchback grip
-HB Industries (duckbill mag release, mini AK safety, reduced weight trigger spring, Delta trigger, Delta charging handle)
-PMM QD front and rear mounts
-30 round magazines x5
-Magpul AFG 2
-InForce WML 400 lumen
-Vortex Razor 3 MOA
-American Defense QD Picatinny riser mount
-Magpul MS4 sling
Sent from my iPhone using Tapatalk
What mag release is that bud?(https://uploads.tapatalk-cdn.com/20170330/0ddacd66f84a3aa8513cb76445074baa.jpg)(https://uploads.tapatalk-cdn.com/20170330/b71c435e89a94b83f178c74386374800.jpg)
Finally finished adding everything I wanted to complete my Scorpion FDE:
-KAK Shockwave Blade
-Lage right folding mechanism, 5 degree cant
-Yeti Wurks Switchback grip
-HB Industries (duckbill mag release, mini AK safety, reduced weight trigger spring, Delta trigger, Delta charging handle)
-PMM QD front and rear mounts
-30 round magazines x5
-Magpul AFG 2
-InForce WML 400 lumen
-Vortex Razor 3 MOA
-American Defense QD Picatinny riser mount
-Magpul MS4 sling
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It's the HB Industries duckbillWhat mag release is that bud?(https://uploads.tapatalk-cdn.com/20170330/0ddacd66f84a3aa8513cb76445074baa.jpg)(https://uploads.tapatalk-cdn.com/20170330/b71c435e89a94b83f178c74386374800.jpg)
Finally finished adding everything I wanted to complete my Scorpion FDE:
-KAK Shockwave Blade
-Lage right folding mechanism, 5 degree cant
-Yeti Wurks Switchback grip
-HB Industries (duckbill mag release, mini AK safety, reduced weight trigger spring, Delta trigger, Delta charging handle)
-PMM QD front and rear mounts
-30 round magazines x5
-Magpul AFG 2
-InForce WML 400 lumen
-Vortex Razor 3 MOA
-American Defense QD Picatinny riser mount
-Magpul MS4 sling
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My baby, still refining.(https://uploads.tapatalk-cdn.com/20170331/88bb48e91bc930c7a9697d618c90471a.jpg)
Sent from my iPhone using Tapatalk
My baby, still refining.(https://uploads.tapatalk-cdn.com/20170331/88bb48e91bc930c7a9697d618c90471a.jpg)Why such a high mount on the optic?
Sent from my iPhone using Tapatalk
It's the fde modelMy baby, still refining.(https://uploads.tapatalk-cdn.com/20170331/88bb48e91bc930c7a9697d618c90471a.jpg)
Sent from my iPhone using Tapatalk
Love the paint! It looks great! Short write up on how you did it?
Just ripped it off an ar I have to try it out, see if I was going to purchase the low mount or go another routeMy baby, still refining.(https://uploads.tapatalk-cdn.com/20170331/88bb48e91bc930c7a9697d618c90471a.jpg)Why such a high mount on the optic?
Sent from my iPhone using Tapatalk
Sent from my SM-N910V using Tapatalk
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_173922_zpscgosuh7n.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_173922_zpscgosuh7n.jpg.html)
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_175110_zpsvc0rzjgh.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_175110_zpsvc0rzjgh.jpg.html)
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_174150_zps5ami9wlk.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_174150_zps5ami9wlk.jpg.html)
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_173806_zpspbpuvkzh.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_173806_zpspbpuvkzh.jpg.html)
The dress up:
Shooters Element Flat Trigger
Shooters Element Extended Magazine Release
HBI Springs Kit
HBI Handgaurd
Troy VFG
CZ Folding Stock
Aimpoint H1 w/Quick Detach
Knights Armament M-LOK Scout Mount
Streamlight ProTac 1 w/presure switch
Silencerco Hybrid w/Octane DT Mount
Yeti Wurks Grip
That is one sweet setup!(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_173922_zpscgosuh7n.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_173922_zpscgosuh7n.jpg.html)
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_175110_zpsvc0rzjgh.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_175110_zpsvc0rzjgh.jpg.html)
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_174150_zps5ami9wlk.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_174150_zps5ami9wlk.jpg.html)
(http://i346.photobucket.com/albums/p428/Vhernandez8787/20170329_173806_zpspbpuvkzh.jpg) (http://s346.photobucket.com/user/Vhernandez8787/media/20170329_173806_zpspbpuvkzh.jpg.html)
The dress up:
Shooters Element Flat Trigger
Shooters Element Extended Magazine Release
HBI Springs Kit
HBI Handgaurd
Troy VFG
CZ Folding Stock
Aimpoint H1 w/Quick Detach
Knights Armament M-LOK Scout Mount
Streamlight ProTac 1 w/presure switch
Silencerco Hybrid w/Octane DT Mount
Yeti Wurks Grip
This is my favorite build on the site. Well done!
(http://i26.photobucket.com/albums/c111/evo8ya/03E7B0FF-1E75-444A-BB9F-4BED4EBBDA7E_zpslafc3lul.jpg) (http://s26.photobucket.com/user/evo8ya/media/03E7B0FF-1E75-444A-BB9F-4BED4EBBDA7E_zpslafc3lul.jpg.html)Nice FDE Scorpion sir!
(http://i26.photobucket.com/albums/c111/evo8ya/39B60916-42A1-4C6C-A14B-3B7DAFFC774A_zpsyoplrnro.jpg) (http://s26.photobucket.com/user/evo8ya/media/39B60916-42A1-4C6C-A14B-3B7DAFFC774A_zpsyoplrnro.jpg.html)
(http://i26.photobucket.com/albums/c111/evo8ya/39C93B64-CE44-4511-B5A9-9573AF68A285_zpsot7mykpw.jpg) (http://s26.photobucket.com/user/evo8ya/media/39C93B64-CE44-4511-B5A9-9573AF68A285_zpsot7mykpw.jpg.html)
Did some work last night. HBI trigger springs, trigger, charge handle, Left safety delete. Right mini AK safety selector
(http://i26.photobucket.com/albums/c111/evo8ya/1E1CE422-222B-41FC-88E6-22784E564FCA_zpssintwbq3.jpg) (http://s26.photobucket.com/user/evo8ya/media/1E1CE422-222B-41FC-88E6-22784E564FCA_zpssintwbq3.jpg.html)
(http://i26.photobucket.com/albums/c111/evo8ya/3832A973-8AD8-4EC8-97A6-5D4567686FFC_zpsws7agezj.jpg) (http://s26.photobucket.com/user/evo8ya/media/3832A973-8AD8-4EC8-97A6-5D4567686FFC_zpsws7agezj.jpg.html)
(http://i26.photobucket.com/albums/c111/evo8ya/DE38EA1D-A150-4F27-9B9B-B591EA854A04_zpshbnomwor.jpg) (http://s26.photobucket.com/user/evo8ya/media/DE38EA1D-A150-4F27-9B9B-B591EA854A04_zpshbnomwor.jpg.html)
Just a couple pistols....
(http://i26.photobucket.com/albums/c111/evo8ya/7B091F39-859D-4914-9265-A92B0127E312_zpsyjbdohtt.jpg) (http://s26.photobucket.com/user/evo8ya/media/7B091F39-859D-4914-9265-A92B0127E312_zpsyjbdohtt.jpg.html)
Its the CZ Evo Suppressor Adaptor 1/2-28 threads. You might not need it if you have a newer model scorpion that comes with the 1/2 x 28 barrel.Thanks Lucky for the quick reply. Ours do have the 1/2x28 threads. so that squares him away for the scorpion, but all his USPs and Mark 23 take different pistons. Now my wife's and my Omega 9ks I have to choose between the fixed mounts in 18x1 or 1/2x28 vs. the 1/2x28 piston w/fixed barrel spacer vs. the 3 lug system to run them on the scorpions. I just bought a OEM carbine handguard for her pistol, so that she can put her pretty red picatinny rails on it ;)
Here is mine. Using the CZ adapter for the can and not liking how it looks. (possibly re-threadit in the future) HBI pistol hand guard, trijicon RMR, and Magpul hand stop kit.
Oh bleep! That is sick man.This was before I had the stock on there.are you using a thread adapter or did you re thread the barrel?
(http://i62.photobucket.com/albums/h113/Seed_of_Ares/Guns/CZ%20Scorpion%20EVO%20III/VZM.IMG_20151019_153709_zpsiz9d0sze.jpg)
This thread needed a bump and more sexiness. ;)[emoji1612]????
(https://s30.postimg.org/wxq5y18qp/20170113_011836.jpg)
(https://s28.postimg.org/xarpm7lcd/20170113_011744.jpg)
(https://s28.postimg.org/57od8i8od/20170113_011803.jpg)
That's what a 4.5" barrel with HBi's K handgaurd and 3 lug mounted can look like.
What pistol grip do you have on it? It looks really good, but different from the usual aftermarket ones I've seen...Here is mine. Using the CZ adapter for the can and not liking how it looks. (possibly re-threadit in the future) HBI pistol hand guard, trijicon RMR, and Magpul hand stop kit.
Just added a yeti QD mount & carbine break to mine
(http://i26.photobucket.com/albums/c111/evo8ya/C858C021-58B5-47C2-A04D-184D7F88BA66_zpsz9jlinln.jpg) (http://s26.photobucket.com/user/evo8ya/media/C858C021-58B5-47C2-A04D-184D7F88BA66_zpsz9jlinln.jpg.html)
(http://i26.photobucket.com/albums/c111/evo8ya/848A3074-9C5C-4E07-9470-D348AD6C5328_zps4kgpsian.jpg) (http://s26.photobucket.com/user/evo8ya/media/848A3074-9C5C-4E07-9470-D348AD6C5328_zps4kgpsian.jpg.html)
(http://i26.photobucket.com/albums/c111/evo8ya/90BD3C88-3D44-40CB-BC25-F56ECB883D64_zpsfkzoijaq.jpg) (http://s26.photobucket.com/user/evo8ya/media/90BD3C88-3D44-40CB-BC25-F56ECB883D64_zpsfkzoijaq.jpg.html)
Just added a yeti QD mount & carbine break to mine
(http://i26.photobucket.com/albums/c111/evo8ya/848A3074-9C5C-4E07-9470-D348AD6C5328_zps4kgpsian.jpg) (http://s26.photobucket.com/user/evo8ya/media/848A3074-9C5C-4E07-9470-D348AD6C5328_zps4kgpsian.jpg.html)
Just added a yeti QD mount & carbine break to mine
(http://i26.photobucket.com/albums/c111/evo8ya/848A3074-9C5C-4E07-9470-D348AD6C5328_zps4kgpsian.jpg) (http://s26.photobucket.com/user/evo8ya/media/848A3074-9C5C-4E07-9470-D348AD6C5328_zps4kgpsian.jpg.html)
what folding mech is that on the blade ?
Howsabout this one? No my photo, obviously... 8)bleep... How fast was she going when she rear-ended that wolf?? ;D
(http://i16.photobucket.com/albums/b13/armoredman/CZ%20posters/21616_10204166438321091_864567839849075946_n_zpsjcgdjl5e.jpg) (http://s16.photobucket.com/user/armoredman/media/CZ%20posters/21616_10204166438321091_864567839849075946_n_zpsjcgdjl5e.jpg.html)
(http://i18.photobucket.com/albums/b129/earlan357/IMG_3250.jpg)
Alright. This thread did it for me. I have a Scorpion on the way. My retirement funds are dwindling quickly...Retirement is highly overrated, anyways. ;)
nice 8) now all you need is a extended poly handle or 2 and your g2g ::)
What are you all using for sling mounts and slings?
"Mine is so big it won't even fit in my pants"Holy crap, that thing is huge lol!
Dear HBI, need tuckable handguard for 2" OD plz kthx
(https://s30.postimg.org/xoexmhyip/DSC05262.jpg)
(https://s11.postimg.org/jrvoz6vf7/DSC05263.jpg)
Holy crap, that thing is huge lol!
If I had a can like that I'd be like the old Verizon commercials. "CAN you hear me know" LoL::)
(http://i51.photobucket.com/albums/f370/raventhunder/18768264_10155212646434333_648722007455729469_o.jpg) (http://s51.photobucket.com/user/raventhunder/media/18768264_10155212646434333_648722007455729469_o.jpg.html)
Just a quick question, do they all have a lot of resistance on the charging handle?
Just a quick question, do they all have a lot of resistance on the charging handle?
But this forum has def made things a lot easier looking into reviews/parts/everything to convince myself I needed a scorpion lol. thanks!
I am thinking of a CZ folding stock with the adapter for the tail hook myself. Very nice set up, looks great. 8)
I am thinking of a CZ folding stock with the adapter for the tail hook myself. Very nice set up, looks great. 8)
I guess my cheeks are too chubby. I can't use my Vortex Viper without at least a short riser.
(https://c1.staticflickr.com/5/4281/35043607992_59b60e2b25_b.jpg)
I love this RDS - wide open and fast.
(https://c1.staticflickr.com/5/4249/35043607142_6bca50dd95_b.jpg)
I am thinking of a CZ folding stock with the adapter for the tail hook myself. Very nice set up, looks great. 8)
When GHW dropped the idea of the factory folder and the tailhook... I knew it was going to blow everything else away. Getting it confirmed that. It's just the best thing going for the Scorpion at this point IMO.
I am thinking of a CZ folding stock with the adapter for the tail hook myself. Very nice set up, looks great. 8)
When GHW dropped the idea of the factory folder and the tailhook... I knew it was going to blow everything else away. Getting it confirmed that. It's just the best thing going for the Scorpion at this point IMO.
You mean other than an SBR with the factory folder I assume. 8)
Just for the record the "easier" to sell thing is a myth.
If you no longer want a SBR and want to sell it, reconfigure it in a non-NFA configuration and simply sell it.
The ATF asks that you notify them to remove it from the NFA registry, but it is not required.
Just for the record the "easier" to sell thing is a myth.
If you no longer want a SBR and want to sell it, reconfigure it in a non-NFA configuration and simply sell it.
The ATF asks that you notify them to remove it from the NFA registry, but it is not required.
I personally would buy a gun with someone's old trust/ info engraving on it, so there's that too.
what base pad is that?(https://c1.staticflickr.com/5/4249/35043607142_6bca50dd95_b.jpg)
Just for the record the "easier" to sell thing is a myth.
If you no longer want a SBR and want to sell it, reconfigure it in a non-NFA configuration and simply sell it.
The ATF asks that you notify them to remove it from the NFA registry, but it is not required.
A lot of people do not understand NFA laws.
Some people spread stuff that is incorrect.
You are one of them and you have done so over and over again here.
While it is possible to remove the gun from the NFA registry and lose out your $200 tax you already paid, to do so requires written notification to the NFA branch. And they will also mail you a letter stating they received the notification and have removed it for future "proof" that it is no longer an SBR.
It is not optional.
If you sell an SBR (regardless of whether it has a stock or not is irrelevant), you better make sure that it's done in accordance with the law.
If the gun is still registered as an SBR, and you sell it outright, you better make sure the buyer files a form 1 because you're transferring an SBR illegally if you don't, which is a felony in and of itself.
I have no intention to hijack the picture thread topic to debate this. I just hate to see someone get into trouble because they listened to your nonsense.
http://www.thetruthaboutguns.com/2015/05/jeremy-s/nfa-for-beginners-form-1-to-manufacture-an-nfa-item/
Should You Change Your Mind Entirely
This FAQ lays it out pretty clearly, but if you revert your firearm to non-NFA configuration and no longer possess the parts to configure it back into NFA land, then the firearm is officially no longer subject to the NFA. You can, and likely should, shoot a letter off to the ATF to inform them of this, but you don?t legally have to. You can now treat the gun like any other gun, from storage to transport to loaning to selling.
Q: Is it necessary to send notification to ATF and receive acknowledgement that the SBR or SBS has been removed from the purview of the NFA before it may be sold as a GCA firearm?
There is no requirement for the possessor of a registered NFA firearm to notify ATF that the firearm has been removed from the purview of the NFA. However, ATF recommends the possessor notify the NFA Branch of such changes in writing so that the possessor is not mistakenly identified as the owner if the firearm is later used in a crime. If, at the time of transfer, the firearm does not meet the definition of a SBR, it should be transferred without filing the NFA transfer application and without payment of the transfer tax.
https://www.atf.gov/firearms/docs/atf-national-firearms-act-handbook-chapter-2/download
I am aware that if a long barrel is on a short barrel rifle (receiver) that it's not in an SBR configuration.
But that's not what I was talking about.
However, the receiver is in the NFA registry via the serial number of the receiver.
And will remain there until the registry ceases to exist from whatever reason.
Again, I told you that I wasn't going to hijack the thread.
For anyone interested in how to remove their serial number (lower) from the registry, this is the proper method.
https://blog.princelaw.com/2009/03/25/batfe-letter-requesting-removal-of-a-sbrsbs-from-the-nfrtr/
(http://i108.photobucket.com/albums/n33/blocksender/Firearms/pcc20001_zpsmx5467va.jpg)
Is there a metal mag that works inf the scorpion, or is that just propped in there for the pic?
FINALLY done! Now all I have to do is get a family pic with the rest of the CZ's! ;)
(http://i.imgur.com/4deUkh6.jpg?1)
Is that a Lage stock you have on there? I'm thinking to get one too. Which length version did you choose? How is it working for you, did you compare this with the factory folding stock? ThanksFINALLY done! Now all I have to do is get a family pic with the rest of the CZ's! ;)
(http://i.imgur.com/4deUkh6.jpg?1)
WaltherP99, thanks for the detailed review and info
What do you mean your factory folder wouldn't fold correctly?Is that a Lage stock you have on there? I'm thinking to get one too. Which length version did you choose? How is it working for you, did you compare this with the factory folding stock? ThanksFINALLY done! Now all I have to do is get a family pic with the rest of the CZ's! ;)
(http://i.imgur.com/4deUkh6.jpg?1)
Yes, that is a Lage on there. I am not sure what length it is as I bought it used but I believe it's the longest. It's working very well for me. Lock up is very tight. Seems to be a bit better when folded compared to the factory stock BUT my opinion may be a bit skewed. The factory stock that I tried out was one of the ones that didn't line up correctly and wouldn't fold properly. It has since been sent back to CZ for a refund as I don't wanna try another one and suffer the same outcome.
You can also eliminate the folder on the Lage and make it a non-folder. I haven't done this yet but I may try it in the future. Either way...I would recommend this stock if you are looking for an alternative to the factory folder.
What do you mean your factory folder wouldn't fold correctly?Is that a Lage stock you have on there? I'm thinking to get one too. Which length version did you choose? How is it working for you, did you compare this with the factory folding stock? ThanksFINALLY done! Now all I have to do is get a family pic with the rest of the CZ's! ;)
(http://i.imgur.com/4deUkh6.jpg?1)
Yes, that is a Lage on there. I am not sure what length it is as I bought it used but I believe it's the longest. It's working very well for me. Lock up is very tight. Seems to be a bit better when folded compared to the factory stock BUT my opinion may be a bit skewed. The factory stock that I tried out was one of the ones that didn't line up correctly and wouldn't fold properly. It has since been sent back to CZ for a refund as I don't wanna try another one and suffer the same outcome.
You can also eliminate the folder on the Lage and make it a non-folder. I haven't done this yet but I may try it in the future. Either way...I would recommend this stock if you are looking for an alternative to the factory folder.
Sent from my SM-N910V using Tapatalk
Ahh, mine does that. Requires me to push in forcing it to line up but it stays
Sent from my SM-N910V using Tapatalk
Silent Blades, 007_Bond, VERY nice photos, thanks!
(http://i.imgur.com/NDM7kNa.jpg)
(http://i.imgur.com/BBaAQnT.jpg)
went to finally install my HBI mini AK safe switches and could not find the package it come in( little nilla folder) so looked around and asked the wife. she thinks she threw it out with some junk mail the kid had laying on the floor. lol. just my luck....Sounds like something mine would do
(https://farm6.staticflickr.com/5669/23270323984_98782a1518.jpg) (https://flic.kr/p/BsjuAu)HBI Theta Extended Charging Handle (https://flic.kr/p/BsjuAu) by Slvrwrx (https://www.flickr.com/photos/slvrwrx/), on FlickrPics look professional.....nice !
(https://farm1.staticflickr.com/643/23270322824_03ef5958bc.jpg) (https://flic.kr/p/Bsjufu)HBI Theta Extended Charging Handle (https://flic.kr/p/Bsjufu) by Slvrwrx (https://www.flickr.com/photos/slvrwrx/), on Flickr
Really loving my Scorpion Pistol !!! (https://uploads.tapatalk-cdn.com/20170917/94d9e884712df7cba5d1f5ca18fb8604.jpg)
Really loving my Scorpion Pistol !!! (https://uploads.tapatalk-cdn.com/20170917/94d9e884712df7cba5d1f5ca18fb8604.jpg)
whats the brand for that front lower hand stop? got a link?
Thanks in advance!
Yes is the factory Hand Stop ...Really loving my Scorpion Pistol !!! (https://uploads.tapatalk-cdn.com/20170917/94d9e884712df7cba5d1f5ca18fb8604.jpg)
whats the brand for that front lower hand stop? got a link?
Thanks in advance!
Factory CZ handstop.
https://shop.cz-usa.com/ProductDetail/366014200703_Hand-Stop-Evo
I got one if your looking for one.
Thanks dude! Can't wait to see yours posted up!
Finally got all my parts in for my pistol build... Just waiting on some tax stamps now. Below is a list of the parts installed (all of which were simple).Congrats on an amazing looking Scorpion !!!
FDE Cheek Rest
Gear Head Works Tailhook
YetiWurks Denali Front QD Mount
Parker Mountain Machine Rear QD Mount
Pakse FDE Grip
Shooters Element Trigger Shoe
Shooters Element Mag Release
Shooters Element Charging Handle
HB Industries Trigger Spring Kit
HB Industries Mini AK Safety
MagPul AFG2 "Butchered by Savage" on the bench grinder
Aimpoint T1 in Larue LT661 Low Mount (excellent co-witness)
Inforce WML on DD mount (not ideal, but works)
KAK Flash Can (until new tax stamp and can arrive)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213817_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213817_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213834_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213834_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213854_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213854_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213903_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213903_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213909_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213909_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213922_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213922_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213935_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213935_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213950_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213950_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_213955_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_213955_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_214042_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_214042_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_214110_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_214110_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_214120_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_214120_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_214133_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_214133_resized.jpg.html)
(http://i1186.photobucket.com/albums/z379/SavageClark82/20170918_214141_resized.jpg) (http://s1186.photobucket.com/user/SavageClark82/media/20170918_214141_resized.jpg.html)
Canadian neighborhood here!
(https://i11.servimg.com/u/f11/19/40/20/73/b6686d10.jpg)
Must be nice to not have SBR restrictions. Looks great.
(https://i.imgur.com/uqJzpnx.jpg)
(https://i.imgur.com/n5Rrkw3.jpg)
(https://i.imgur.com/uqJzpnx.jpg)
(https://i.imgur.com/n5Rrkw3.jpg)
Very nice. How do you like the delta point?
Here's my evo, the favorite in my collection, have a manticore stock but alas no form back yet.Great paint job
(https://preview.ibb.co/nuHpAm/IMG_20171023_163539.jpg) (https://ibb.co/dHJJ36)
(https://preview.ibb.co/cx3UAm/IMG_20171023_163556.jpg) (https://ibb.co/fAxZbR)
Here's my evo, the favorite in my collection, have a manticore stock but alas no form back yet.
... pic snipped ...
Awww thanks for the heads up, already taken it off. Is there anything that's not illegal to put on these weapons...It's not the arm brace he's referring to.
It's the vertical front grip that's causing legality problems.
Can't have a vertical front grip on a pistol.
https://www.atf.gov/file/97256/download
Awww thanks for the heads up, already taken it off. Is there anything that's not illegal to put on these weapons...It's not the arm brace he's referring to.
It's the vertical front grip that's causing legality problems.
Can't have a vertical front grip on a pistol.
https://www.atf.gov/file/97256/download
Your call (obviously), but a wise man might either delete or change the posted photos. Nothing like self-incrimination.
What's the total cost to shorten to K Length...$300-325 in parts?
Sent from my SM-N910V using Tapatalk
MY first Scorpion EVO3 S1. Lots of upgrades made post-purchase - tried to go for the H&K MP5K PDW look.Nice!
(https://3.bp.blogspot.com/-u6eKDGSgNQM/Wg0MwD_khBI/AAAAAAAACMw/7BXAZUCRTE4nMnBvj7x4uQieR862Pwz3QCLcBGAs/s1600/20171114_194419_NEW.jpg)
(https://3.bp.blogspot.com/-VZNxHz8IosQ/Wg0M27guXxI/AAAAAAAACM0/WY6KnZNrrJoocKjmyMXLZJG4ZPQ6-IWwQCLcBGAs/s1600/20171114_194437_NEW.jpg)
(https://3.bp.blogspot.com/-RuiHJ9BPchs/Wg0M6oJ-8fI/AAAAAAAACM4/kJKXMRHfZdEIamFx1x7UtihFAM_loeZJgCLcBGAs/s1600/20171114_194506.jpg)
(https://3.bp.blogspot.com/-NtDh8Xyd1Yg/Wg0M9a1u1uI/AAAAAAAACM8/mx09_s-Y3acwsj0oXGG8rtvb88fsw-HIACLcBGAs/s1600/20171114_194516.jpg)
Nice!
What flash hider is that?
(http://i.imgur.com/6PylAB8.png)
HBI 6.84 foregrip
Nightstrike diamondback AFG
Uzi Pro 32 rd Magazine with Cz Scorpion adapter
Gearheadworks Tailhook Arm brace with CJ Adapter w/ magnet to hold while folded
Primary Arms Micro dot
(http://i.imgur.com/6PylAB8.png)
HBI 6.84 foregrip
Nightstrike diamondback AFG
Uzi Pro 32 rd Magazine with Cz Scorpion adapter
Gearheadworks Tailhook Arm brace with CJ Adapter w/ magnet to hold while folded
Primary Arms Micro dot
Late to the party... Just picked up my Scorpion last weekend and installed the Tailhook/CZ folder on Monday. Just found this thread and your post earlier today, and I'm intrigued by your Tailhook adapter. Do you have any more pics, details, about the adapter on your gun? Overall I'k really diggin on the Tailhook although I wish they had designed it to be a bit thinner side to side so that it would fold a little flatter so that a magnet could be inletted/epoxied in place to hold the stock in the folded position. Of course, I realize it wasn't designed specifically for this application, so... Even still, I noticed that you've managed to install a magnet on your setup, so I'm curious about how you accomplished it. Thanks for any insight!
My new acquisition.Great pick up ... love mine
(https://farm5.staticflickr.com/4713/27810770519_a8088d3f69_z.jpg)
My new acquisition.How do you like the Diamondback? Pros? Cons?
(https://farm5.staticflickr.com/4713/27810770519_a8088d3f69_z.jpg)
How do you like the Diamondback? Pros? Cons?
I currently have the Defence Fab PTK but it isnt comfortable for me.
Got my Form 1 stamp in Nov and my Form 4 stamp in Dec! It's so much more fun shooting this with the stock and can.
Now I need to work on the trigger ;D
(https://i.imgur.com/PV6HKSq.jpg)
(https://imgur.com/Pdl5871.jpg)
Nice setup ! I am also waiting on my Omega 9k, does the stock cz sights 1/3 cowitness with the MRO ? I have the troy micro's to go with my mro when it gets here.
Finally stamped!
...
Sent from my iPad using Tapatalk
My pistol has a little brother now.What is the one on the left? That is just sick
(https://uploads.tapatalk-cdn.com/20180208/535cefd2ff942892a6a9bf8f5fd33eab.jpg)
(https://uploads.tapatalk-cdn.com/20180208/a9858c9469c138bd1751a1684c42ebaa.jpg)
Sent from my iPhone using Tapatalk
My pistol has a little brother now.What is the one on the left? That is just sick
(https://uploads.tapatalk-cdn.com/20180208/535cefd2ff942892a6a9bf8f5fd33eab.jpg)
(https://uploads.tapatalk-cdn.com/20180208/a9858c9469c138bd1751a1684c42ebaa.jpg)
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My pistol has a little brother now.i knew the carbine handguard was long but you dont really think how long it is until you have it next to the pistol version
(https://uploads.tapatalk-cdn.com/20180208/535cefd2ff942892a6a9bf8f5fd33eab.jpg)
(https://i.imgur.com/jDNVPfM.jpg)
I will add one of mine to the thread.
(https://i.imgur.com/jDNVPfM.jpg)
I will add one of mine to the thread.
I really like that stabilizing brace - who makes it? Is it the hook style?
Aside from looking much better than the SB Tactical one, the hook style actually function for me.
New guy here.
Love my scorpion! Sold my POF RS MP5K clone to buy my scorpion, couldn?t be happier.
(https://i.imgur.com/muCcgQ4.jpg)
Tfrick is that on the evo magwell, a buller button?
HBI has their hand guards back in stock, anyone have any first hand experience with the 6.84" flat nose guard?
Thinking about picking this up, I have the full hand guard on mine, and with the newly installed SiCo omega 9k its great, but practicality of keeping things tight is a concern, was thinking about picking up the flat nose guard per sweet looks but making things some what easier for putting on/taking off the can.
How does this color look?
(https://i.imgur.com/eRkkPFTl.jpg)
(https://i.imgur.com/z6wLHYql.jpg)
anyone know if this site will re-size the pictures?Absolutely beautiful! Which can did you go with?
Well going to post them. I can?t see pictures on my work computer, and my phone shows this pages in half and pictures I have to scroll. So I hope they come in smaller then on my phone.
After about a year of lurking on here, and a little under a year on waiting for my forms to come back, finally got my can and sbr paperwork. Has same mods as most people on here. Got to shoot it a few times now, it?s awesome, but already bought the BHI 6? hand guard and looking into the HK3 lug setup per can coming loose on the last mag I shot. Didn?t get a baffle strike, but it?s way to hard to keep things tight inside the guard without lock tite to the barrel, luckily the adapter and can came off together.
(https://i.imgur.com/AwBq5AM.jpg)
(https://i.imgur.com/bpUN34R.jpg)
(https://i.imgur.com/ZTqWe31.jpg)
(http://i.imgur.com/NDM7kNa.jpg)
(http://i.imgur.com/BBaAQnT.jpg)
Ah, genuine official orange dummy rounds! We have bunches of those at work, but they are far, far more beat down. Very nice stuff, sir, very nice stuff. :)
(http://i.imgur.com/BBaAQnT.jpg)
Is it me ... or are those dummy rounds in backwards? :o
It's double safety insurance; like a belt AND suspenders!
Finally, I found best brace for my pistol.I'm thinking of ditching my kak shock wave for the same sb tactical brace. How's the weight?
(https://c2.staticflickr.com/2/1805/42448469914_041af4c0d1_b.jpg)
(https://c1.staticflickr.com/1/843/43116972492_8074f06be3_b.jpg)
(http://i349.photobucket.com/albums/q395/cpufed/CZ%20Scorpion%202_zpscbaqlos3.jpg) (http://s349.photobucket.com/user/cpufed/media/CZ%20Scorpion%202_zpscbaqlos3.jpg.html)
(http://i349.photobucket.com/albums/q395/cpufed/CZ%20Scorpion%203_zpsouftetux.jpg) (http://s349.photobucket.com/user/cpufed/media/CZ%20Scorpion%203_zpsouftetux.jpg.html)
The Holosun is too high to cowitness but if I need iron sights I can just pop off the Holosun. It?s a great optic for the Scorpion and cheek weld is perfect. As soon as the gun comes up I?m on target. This is my USPSA PCC setup.
Finally, I found best brace for my pistol.I'm thinking of ditching my kak shock wave for the same sb tactical brace. How's the weight?
(https://c2.staticflickr.com/2/1805/42448469914_041af4c0d1_b.jpg)
(https://c1.staticflickr.com/1/843/43116972492_8074f06be3_b.jpg)
Sent from my HTC One M9 using Tapatalk
Finally, I found best brace for my pistol.
(https://c2.staticflickr.com/2/1805/42448469914_041af4c0d1_b.jpg)
(https://c1.staticflickr.com/1/843/43116972492_8074f06be3_b.jpg)
(https://i.imgur.com/wkvLxqM.jpg)Awesome. Hydro dip or cerakote?
(http://i1380.photobucket.com/albums/ah165/Naz1236/1E42CB0B-995F-479A-A927-8554FCE7A90B_zpszegmrplx.jpeg) (http://s1380.photobucket.com/user/Naz1236/media/1E42CB0B-995F-479A-A927-8554FCE7A90B_zpszegmrplx.jpeg.html)
(https://uploads.tapatalk-cdn.com/20180817/8b9a623d6829e35a9dec4904a5fef9b3.jpg)
Sent from my iPhone using Tapatalk
Done... I think, lol.Sweet set up
(https://uploads.tapatalk-cdn.com/20180929/4b5394320f552b93c8d1c65d60d0ddb6.jpg)
(https://uploads.tapatalk-cdn.com/20180929/5526b856a6a33deb8a2dd0532841d8ea.jpg)
Went to the k cut hand gaurd so I can run my B&T TP9 suppressor and see how much quieter it is vs my Octane 45k. Ran 100 rounds through it this morning and it is very quiet running 158gr PPU ammo. I think I'll stick with this setup for a long while now.(https://uploads.tapatalk-cdn.com/20180923/eb52057031c04023a4ac1387fb78351b.jpg)(https://uploads.tapatalk-cdn.com/20180923/3a98c5e064ce6faf92685f4ad2ed1b2d.jpg)
Sent from my Pixel 2 using Tapatalk
What's the pistol grip being used here?
Akuser47, what bag is that you have your evo in?Condor compact assault pack I had it laying around new. It works not perfect, but it has a use now. I like it
Sent from my iPhone using Tapatalk
This is with bag closed (http://i228.photobucket.com/albums/ee97/akuser47/DSC01037_zpsmexaywbr.jpg) (http://s228.photobucket.com/user/akuser47/media/DSC01037_zpsmexaywbr.jpg.html)
just finished the K conversion on mine, I think I want to swap out the EVO brace for the tailhook with the stock folder or a PDW brace any input from those who are using either one would be great.I prefer the trigger shoe from Shooters Element.
(https://i.imgur.com/9vm8VBR.jpg)
HBI K Barrel and K Hand guard
HBI Duck billed Mag release
HBI Trigger Spring Kit
SB EVO Brace
Apex Pistol grip
Any one with some input on an cost effective trigger shoe let me know. I like the flat triggers but wasn't 100% thrilled with HBI selection
what color is that did you have it painted? Not sure if it just the lighting in the picture or just my monitor making it look like a dark grey mixed with FDE? either way looks good.It's factory FDE color, probably the lighting where I was
(https://uploads.tapatalk-cdn.com/20190112/26b9f6f7227ae0fc99a3c755c93607c8.jpg)
(https://uploads.tapatalk-cdn.com/20190112/f791ccf5f7af039cc285e8c7ab62cb7a.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20190112/26b9f6f7227ae0fc99a3c755c93607c8.jpg)
(https://uploads.tapatalk-cdn.com/20190112/f791ccf5f7af039cc285e8c7ab62cb7a.jpg)
Sent from my iPhone using Tapatalk
If you don't mind my asking, what stock and adaptor is that? I haven't gotten my Scorpion yet so my choice of a brace is still up in the air. I had pretty well decided on the factory folding brace with the Tailhook mod, but after seeing yours, I might consider that instead. It looks similar to the new brace Sig is coming out with. That really looks sharp!
It's great to have plenty of choices to select from.
(https://farm6.staticflickr.com/5669/23270323984_98782a1518.jpg) (https://flic.kr/p/BsjuAu)HBI Theta Extended Charging Handle (https://flic.kr/p/BsjuAu) by Slvrwrx (https://www.flickr.com/photos/slvrwrx/), on Flickr
(https://farm1.staticflickr.com/643/23270322824_03ef5958bc.jpg) (https://flic.kr/p/Bsjufu)HBI Theta Extended Charging Handle (https://flic.kr/p/Bsjufu) by Slvrwrx (https://www.flickr.com/photos/slvrwrx/), on Flickr
Just got my Evo 3 S2. Right now I have a Sightmark Ultra Plus on it that I might switch out for a Romeo 5 I have laying around, once I have a chance to test them out.Make sure it's lubed
The charging handle is incredibly difficult to pull, though I hope it will improve after a few trips to the range.(https://uploads.tapatalk-cdn.com/20190310/67b56e600bb3f40832574848bd6a8938.jpg)(https://uploads.tapatalk-cdn.com/20190310/b968663878b072bc04c611f088c32a6e.jpg)(https://uploads.tapatalk-cdn.com/20190310/673b9f265f112fd20ca3153bf6386549.jpg)
Sent from my SM-G930T using Tapatalk
Thanks. It came decently lubed, but I've already stripped it, cleaned it and applied more. It came full of small dry bits of cardboard from the box.Just got my Evo 3 S2. Right now I have a Sightmark Ultra Plus on it that I might switch out for a Romeo 5 I have laying around, once I have a chance to test them out.Make sure it's lubed
The charging handle is incredibly difficult to pull, though I hope it will improve after a few trips to the range.(https://uploads.tapatalk-cdn.com/20190310/67b56e600bb3f40832574848bd6a8938.jpg)(https://uploads.tapatalk-cdn.com/20190310/b968663878b072bc04c611f088c32a6e.jpg)(https://uploads.tapatalk-cdn.com/20190310/673b9f265f112fd20ca3153bf6386549.jpg)
Sent from my SM-G930T using Tapatalk
Sent from my SM-N960U using Tapatalk
Just got my Evo 3 S2. Right now I have a Sightmark Ultra Plus on it that I might switch out for a Romeo 5 I have laying around, once I have a chance to test them out.
The charging handle is incredibly difficult to pull, though I hope it will improve after a few trips to the range.(https://uploads.tapatalk-cdn.com/20190310/67b56e600bb3f40832574848bd6a8938.jpg)(https://uploads.tapatalk-cdn.com/20190310/b968663878b072bc04c611f088c32a6e.jpg)(https://uploads.tapatalk-cdn.com/20190310/673b9f265f112fd20ca3153bf6386549.jpg)
Sent from my SM-G930T using Tapatalk
PDW brace works great. It deploys to full length on a single pull then stays sturdy. I didn't notice significant wobble or other issues while using it.Just got my Evo 3 S2. Right now I have a Sightmark Ultra Plus on it that I might switch out for a Romeo 5 I have laying around, once I have a chance to test them out.
The charging handle is incredibly difficult to pull, though I hope it will improve after a few trips to the range.(https://uploads.tapatalk-cdn.com/20190310/67b56e600bb3f40832574848bd6a8938.jpg)(https://uploads.tapatalk-cdn.com/20190310/b968663878b072bc04c611f088c32a6e.jpg)(https://uploads.tapatalk-cdn.com/20190310/673b9f265f112fd20ca3153bf6386549.jpg)
Sent from my SM-G930T using Tapatalk
How do you like the PDW brace? I looked at buying one but read some reviews that said it?s loose and wobbly when open.
I know we've seen pictures of the Micro before, but I just brought this one home today. All cleaned and lubed and ready for the range tomorrow, hopefully.Congrats and enjoy! Let us know how it goes. I took mine out on Monday for the first time.
(https://i.imgur.com/9E4ERq2.jpg)
I know we've seen pictures of the Micro before, but I just brought this one home today. All cleaned and lubed and ready for the range tomorrow, hopefully.Congrats and enjoy! Let us know how it goes. I took mine out on Monday for the first time.
(https://i.imgur.com/9E4ERq2.jpg)
Sent from my SM-G930T using Tapatalk
I know we've seen pictures of the Micro before, but I just brought this one home today. All cleaned and lubed and ready for the range tomorrow, hopefully.Congrats and enjoy! Let us know how it goes. I took mine out on Monday for the first time.
(https://i.imgur.com/9E4ERq2.jpg)
Sent from my SM-G930T using Tapatalk
I managed to get the Micro out today. Shot about 200 rounds combined of Winchester 124 gr NATO and Blazer Brass 115 gr. The Micro ran perfectly on both. Very well satisfied with it's first outing, in fact it's already at the top of my list for fun to shoot guns. It ranks right up there with my Sig MPX and Kriss Vector. Each pistol has it's own good and bad points, but the Micro's list of bad points is pretty small. The controls on the Scorpion seem a little more "clunky" (mainly that safety switch again) to me than on the other two, but considering that the others cost a few hundred more, I'm not worried, plus I have a feeling that they will improve over time.
In fact the Micro is a lot like an AR, it's great right out of the box, but you soon realize that there are lots of minor things that you can do to improve it. In fact I don't think I've ever owned a firearm that shows so much potential, but really needs a little tweaking to make it perfect, as the Scorpion. The first and foremost is the right hand safety. It's impossible to shoot it without that safety switch rubbing a raw spot on your hand. I know some have simply ground it off, but I think I'll start researching after market replacement parts and find something better.
The trigger also leaves something to be desired. It gets the job done as is, but it is a bit gritty and the pull is too heavy. I might leave it as is and see if it gets better over time, but I might also look into a replacement for it too.
That's really about it. Nothing else on the Micro bothers me to the point that makes me want to go out and replace anything on it, except that right hand safety switch. I know there are tons of after market parts available for it, but I'm trying to hold off on that, plus it doesn't really need a whole lot to make it just about perfect. It's a well thought out design that is a whole lot of fun to shoot, is very accurate (it's amazing how accurate a 4" barrel can be), and from what everyone seems to say, it's a very well built little gun that will last many years. This is my first Scorpion, and I can now see that all the talk about it is true. It's a great little gun.
Just finished this SBR after getting my Form 1 E- File back in 2 weeks! Personal record there. I'm still waiting on my SiCo Omega 9k suppressor and for Surefire to roll out the XLV2 light. I personally like the low profile OEM charging handle and the OEM mag release. The Black Collar trigger is excellent clean 4.5lb 2 stage pull.That is awesome. Also super quick turn around on that Form 1.
HB Industries Micro Conversion Tri-Lug
HB Industries Short Ambi Saftey selectors
Black Collar Arms Scorpitol Trigger pack (drop in)
Shooters Element Flat trigger
Pakse Pathfinder Grip
A3 Tactical "HK" VFG
Dan Haga Design ACR adapter
ACR Folding Stock
Aimpoint Micro T2
Bobro QD mount
(https://uploads.tapatalk-cdn.com/20190314/4b6f4f66ff5f42f9944958484564a1d9.jpg)(https://uploads.tapatalk-cdn.com/20190314/43b11ab3396a97c299a2e6de05f98b23.jpg)
No offense to Manticore Arms and their collapsing brace, bu the Micro looks so much better with a folder.
I know it is my personal preference :)
Steve
(https://i.imgur.com/9AWQhwa.jpg)
kalifornia gun laws suck.
Thought I'd post up a couple pics of my fun gun. Got a suppressor being held hostage right now and will likely put in a Black Collar Arm Trigger when they get them back in stock.Sweet set up
(https://i.imgur.com/YLFuTuO.jpg)
(https://i.imgur.com/YLFuTuO.jpg)
(https://i.imgur.com/3TmfiTl.jpg)
(https://i.imgur.com/3TmfiTl.jpg)
(https://i.imgur.com/FDIhG1b.jpg)Very nice!
Who says the Osprey doesn't fit? Micro K barrel. Top underside of hand guard needed a little metal removed, not much though.
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/55A0C71F-A725-4614-8516-407FDE2F260B.jpg)
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/4884195D-197A-4290-AFC4-C1726315A9FC.jpg)
Pretty much my final setup.... for now. :) What a difference the Yeti Wurx Everest grip makes. Love it.
It?s a Haley Thorntail. That?s my Scorpion so if you have any other questions feel free to ask. I?ve been running that setup for some time. Some things I changed over time, but the light has stayed there because it?s the best spot for me.(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/55A0C71F-A725-4614-8516-407FDE2F260B.jpg)
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/4884195D-197A-4290-AFC4-C1726315A9FC.jpg)
Pretty much my final setup.... for now. :) What a difference the Yeti Wurx Everest grip makes. Love it.
I know this is really old, but , does anyone know what mount that is holding the light?
I'm trying to decide between a bottom mount or 45* mount. I have a hybrid on the end of my scorpion so, shadows come into play. I'm pretty sure 6 o'clock is going to be the best , but i want to try a 45. Both at different distances to get a true feel for the shadow effect.
SB Tactical. I wish it allowed firing in the closed position. I was thinking about some fine Dremel work around the ejector port. Anyone tried this?
It?s a Haley Thorntail. That?s my Scorpion so if you have any other questions feel free to ask. I?ve been running that setup for some time. Some things I changed over time, but the light has stayed there because it?s the best spot for me.
(https://uploads.tapatalk-cdn.com/20190428/0f9ac0994e515cd5e707ea24903aefb6.jpg)
Here?s a pic from last week. As you can see I have kept it the same. The light in that position makes activating with my thumb easy and doesn?t create shadows.
QuoteIt?s a Haley Thorntail. That?s my Scorpion so if you have any other questions feel free to ask. I?ve been running that setup for some time. Some things I changed over time, but the light has stayed there because it?s the best spot for me.
(https://uploads.tapatalk-cdn.com/20190428/0f9ac0994e515cd5e707ea24903aefb6.jpg)
Here?s a pic from last week. As you can see I have kept it the same. The light in that position makes activating with my thumb easy and doesn?t create shadows.
What exact light and Thorntale is that? I didn't notice the logo on that mount last night, but see it now. There are several options and I want one that will allow me to use a Streamlight protac 1, but I'd want to ditch the bulky mount it comes with and still be able to use the Thorndale.
Thanks. This helps a ton.
The Surefire Scout uses the same exact style mounting system so I should end up with something just like what you have on yours, but using a streamlight pro-tac rail mount. It's about half the price.
Did your Thorndale mount come with one or two rings, or was it a flat mount? I'm trying to sift through them all on Amazon and can't get a picture in my head of which one will work best.
Thanks. This helps a ton.
The Surefire Scout uses the same exact style mounting system so I should end up with something just like what you have on yours, but using a streamlight pro-tac rail mount. It's about half the price.
Did your Thorndale mount come with one or two rings, or was it a flat mount? I'm trying to sift through them all on Amazon and can't get a picture in my head of which one will work best.
Another question for you Sigma - what do all those controls do on your remote pad?
I went with the 5.5" length, HL-1. If I ever shoot it un-supressed I don't see it being an issue sticking out there and if it is, we'll find out. hah!
Edit- this guy has his mounted on the top rail. https://czfirearms.us/index.php?topic=95634.0
Nice! What don't you like about the light as it is?It's superficial. :D Just looks a little clunky. It is very functional though. And nice to throw a laser on there.
So after mounting this setup (thorntail/streamlight pro-tac) and the TLR -1 HL, the Thornsdale mount wins hands down. There's just not enough rail space below, which is where the TLR 1 needs to go on my pistol.
After deciding on the Thornsdal/pro-tac I configured them several different ways in an effort to minimize the shadow from the suppressor. This is what I ended up with, and, it's not only pretty darn ideal but it I think it looks really good too.
What do you guys think?
Is that an osprey on there?Nah, the Nosprey. [emoji16]
Nothing fancy:Very nice set up .... congrats
Reptilia Zhukov Stock kit
Magpul Grip & Magazine Release
Working on new Flip Up BUIS's
(https://i.imgur.com/hVbWhB5.jpg?1)
(https://i.imgur.com/169rplx.jpg?1)
There are a few issues left to correct. The muzzle devices need sorted out once I can dedicate a suppressor and the CZC adapter is 2"s longer when compared to the HBI setup. I don't mind the extra length but it's pretty long for most people and would look better with the HBI Zhukov adapter.
(https://imagizer.imageshack.com/v2/800x600q90/924/VHwg6F.jpg) (https://imageshack.com/i/poVHwg6Fj)
What BUIS are those?
Nothing fancy:Very nice set up .... congrats
Reptilia Zhukov Stock kit
Magpul Grip & Magazine Release
Working on new Flip Up BUIS's
(https://i.imgur.com/hVbWhB5.jpg?1)
(https://i.imgur.com/169rplx.jpg?1)
Sent from my iPad using Tapatalk
(https://i.imgur.com/NGKTs4n.jpg)
(https://i.imgur.com/NGKTs4n.jpg)Tell me about your suppressor cover please.
Tell me about your suppressor cover please.
I?m assuming the Velcro is affixed to the handguard with an adhesive. Do you think that will stand up to the heat over time?Tell me about your suppressor cover please.
Armageddon Gear made it for $58. It's stitched heat resistant material with an outer black layer. It's affixed with velcro the length of the rail. If you're interested in one, talk to Tom at Armageddon Gear (tom@armageddongear.com)
(https://imagizer.imageshack.com/v2/800x600q90/923/9FuazG.jpg) (https://imageshack.com/i/pn9FuazGj)
Sweet!! Lov'n the one on the left 8) H&K Tactical... how's the stock trigger pull on that? Looks like you have done some trigger work on this one, at least a different shoe. I have never handled one and am spoiled by 1911 triggers.
It looks like the same HBI Theta Forward trigger on mine except this one is red and I picked the black one. It drops the pull by changing the angle of the trigger so it's a bit lighter just by itself. I combined that with HBI's spring kit and then polished everything in the trigger group with Flitz until I could see my reflection in it. Mine feels like a 1911 trigger now and I learned how to tune triggers building 1911s so tat makes sense I guess :D
(https://imagizer.imageshack.com/v2/800x600q90/923/9FuazG.jpg) (https://imageshack.com/i/pn9FuazGj)
Sweet!! Lov'n the one on the left 8) H&K Tactical... how's the stock trigger pull on that? Looks like you have done some trigger work on this one, at least a different shoe. I have never handled one and am spoiled by 1911 triggers.
The FN stock trigger is pretty bad, the Apex replacement changes the trigger pull into something that's near the top as far as striker triggers go.
My pistols have only been hammer w/the exception of a .357 Sig (Glock) that I had. Really didn't care for that trigger. Is the tigger kinda long like that?
Same here. I had a Glock, hated the trigger so I put in a Zev Tech kit and it went from too heavy to aim straight to so light it's not safe to carry anymore. I've always hated Glocks. I had 1st Gen Steyr M40 that I carried for years that I absolutely loved though. That was the one and only hammerless pistol I've ever liked.
The FN stock trigger is pretty bad, the Apex replacement changes the trigger pull into something that's near the top as far as striker triggers go.
My pistols have only been hammer w/the exception of a .357 Sig (Glock) that I had. Really didn't care for that trigger. Is the tigger kinda long like that?
Finally got mine in!
(http://img.photobucket.com/albums/v45/issues1975/20180321_121839a1_zpsaciqu5v4.jpg) (http://smg.photobucket.com/user/issues1975/media/20180321_121839a1_zpsaciqu5v4.jpg.html)
https://www.preppergunshop.com/gear-head-works-scorpion-tailhook-mod-1-brace-adapter-with-cz-folding-cheek-rest-and-tailhook/Finally got mine in!
(http://img.photobucket.com/albums/v45/issues1975/20180321_121839a1_zpsaciqu5v4.jpg) (http://smg.photobucket.com/user/issues1975/media/20180321_121839a1_zpsaciqu5v4.jpg.html)
Does anyone know where to get this tailhook adapter? I need one.
https://www.preppergunshop.com/gear-head-works-scorpion-tailhook-mod-1-brace-adapter-with-cz-folding-cheek-rest-and-tailhook/Finally got mine in!
(http://img.photobucket.com/albums/v45/issues1975/20180321_121839a1_zpsaciqu5v4.jpg) (http://smg.photobucket.com/user/issues1975/media/20180321_121839a1_zpsaciqu5v4.jpg.html)
Does anyone know where to get this tailhook adapter? I need one.
Sent from my SM-N950U using Tapatalk
Gray or Green?Sophie's choice man. But that gray looks nice.
(https://i.imgur.com/CxPVxNB.jpg)
(https://i.imgur.com/F0GvuG1.jpg)
Gray or Green?Sophie's choice man. But that gray looks nice.
(https://i.imgur.com/CxPVxNB.jpg)
(https://i.imgur.com/F0GvuG1.jpg)
ACRGray or Green?Sophie's choice man. But that gray looks nice.
(https://i.imgur.com/CxPVxNB.jpg)
(https://i.imgur.com/F0GvuG1.jpg)
What "cheek rest" is that? One has a tailhook and the other a shoulder brace, but they look the same.
@CTTechOk to bad. Thanks for the the report though.
After about 100 rounds in succession, the glue began to heat and liquify. Then the whole guard began to slide. I took it off. It was a decent solution for the heat, but it looked awful and the exposed glue was even worse. I just bought some mechanix gloves and put my ergos back on.
Let there be light! :D Cannibalized some stuff from my .300 blackout pistol. Now I suppose I have to work on that one to get it back up to speed. :)
(https://photos.smugmug.com/photos/i-mvXH4BB/0/33a89640/O/i-mvXH4BB.jpg)
Let there be light! :D Cannibalized some stuff from my .300 blackout pistol. Now I suppose I have to work on that one to get it back up to speed. :)
I think i need a micro length scorpion now :) The ACR/TailHook adapter is spendy configuration since you have to piece it together, but sure does look nice.
Beautiful build, ya filthy lefty :DLOL, you talking to me? [emoji16]
Is the tape switch mounted on top?
Beautiful build, ya filthy lefty :DLOL, you talking to me? [emoji16]
Is the tape switch mounted on top?
Tape switch on top with the Cloud Defensive LCS. Would love to get an OWL; too cumbersome for the Micro IMO with the switch attached to the light the way it is. I'm sure someone could make it work though. If I get one it's going on the .300 pistol.
Modlite systems PLH or OKW is better than surefire or the OWL. They also sell just the heads that replace a surefire if you already have a surefire light. IMO the best out. Look up all the real side by side comparisons.Not a bad price for the whole kit. No way I'd spend 250 just to change out the head though. Good to keep in mind if something breaks or for a future build. [emoji106]
Sent from my SM-N950U using Tapatalk
Beautiful build, ya filthy lefty :DLOL, you talking to me? [emoji16]
Is the tape switch mounted on top?
Tape switch on top with the Cloud Defensive LCS. Would love to get an OWL; too cumbersome for the Micro IMO with the switch attached to the light the way it is. I'm sure someone could make it work though. If I get one it's going on the .300 pistol.
I've sat here most of the day trying to talk myself into buying a $400 WML and I just can't do it, especially sight unseen and no one around here even carries Surefire.
If you do get an Cloud Defensive OWL, please give a review.
https://www.preppergunshop.com/gear-head-works-scorpion-tailhook-mod-1-brace-adapter-with-cz-folding-cheek-rest-and-tailhook/Finally got mine in!
(http://img.photobucket.com/albums/v45/issues1975/20180321_121839a1_zpsaciqu5v4.jpg) (http://smg.photobucket.com/user/issues1975/media/20180321_121839a1_zpsaciqu5v4.jpg.html)
Does anyone know where to get this tailhook adapter? I need one.
Sent from my SM-N950U using Tapatalk
Look at the adapter that goes between the cheek rest and the tailhook. It's different than the one I've seen everywhere else (like at Prepper Gun Shop). It follows the contours of the "cheek rest".
Send that dude a message? I googled around for a bit and find nothing.https://www.preppergunshop.com/gear-head-works-scorpion-tailhook-mod-1-brace-adapter-with-cz-folding-cheek-rest-and-tailhook/Finally got mine in!
(http://img.photobucket.com/albums/v45/issues1975/20180321_121839a1_zpsaciqu5v4.jpg) (http://smg.photobucket.com/user/issues1975/media/20180321_121839a1_zpsaciqu5v4.jpg.html)
Does anyone know where to get this tailhook adapter? I need one.
Sent from my SM-N950U using Tapatalk
Look at the adapter that goes between the cheek rest and the tailhook. It's different than the one I've seen everywhere else (like at Prepper Gun Shop). It follows the contours of the "cheek rest".
So, no one knows where to get that adapter?
I keep saying and I keep thinking this thing looks like an updated version of an Hk UMP hahaha (only affordable).
If only CZ would start making them in 10mm and 45acp. I would certainly buy one.
Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.
(https://pbase.com/kwb377/image/169443478.jpg)
Got a visit from UPS and FedEx today...
(https://pbase.com/kwb377/image/169443482.jpg)
Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.
Got a visit from UPS and FedEx today...
Uh unless you have an AOW/SBR tax stamp, I recommend you take the grip that’s 90 degrees from horizontal off that weapon.
Sent from my iPhone using Tapatalk
Picked up a new Scorpion a couple of weeks ago...immediately added a couple of items.Unless its OAL is greater than 26" with a fixed stock. Because it's a folding brace (which is not counted towards OAL), I highly suggest taking that off and deleting that picture.
(https://pbase.com/kwb377/image/169443478.jpg)
Got a visit from UPS and FedEx today...
(https://pbase.com/kwb377/image/169443482.jpg)
I agree, but if you look closely it looks like that forward grip is angled slightly forward. I had run across something like that surfing around and since it's angled they get around the "vertical" grip law. Of course maybe it is vertical and its an optical illusion! Lol!!Negative. That's classified as a VFG. They make slightly forward canted VFG to alleviate interference for curved magazines. This does not fall intotnhe category of "angled foregrip" like a magpul etc. Looks like an honest mistake, but, honest mistake is not in the BATF's vocabulary.
Sent from my SAMSUNG-SM-G930A using Tapatalk
I had the understanding that a grip angled from 90 degrees was considered an angled-foregrip. That was the information passed along to me by persons that recommended that particular grip. I guess that's the problem with interpretive law...it's a coinflip as to what's legal or not.It happens. I suggest to never take anyone's interpretation of the law as fact when it comes to battling gray areas- even mine! The ATF only states that a VFG is both in front of the magazine well and orientated perpendicular to the bore axis. You could make the assumption that means 90 degrees. Magpuls "angled foregrip" and other similar manufactured grips are classified as "handguard grips", not VFG, can not be gripped in a manner like a VFG and follow the same degree angle so its gets a pass. This grip however is sold as a VFG, is handled like a VFG and designed only for relief for curved magazines. At the end of the day, that is not something you want to try and "interpret" to the ATF when they bust your door down at 5am. You are making the right choice in removal and always lean to the side of caution when dealing with this. Good looking scorpion!
I have an unused Magpul AFG I can mount...guess this one will go to the rifle.
Just another Scorpion, but it’s mine! Yeah, I used some filters to make my gat look a bit more dramatic and exciting.I don't know if it's the same thing. Mine was really hard to charge, had loosened up with use. Never really felt like something was blocking it though.
(https://i.imgur.com/jHG56Br.jpg)
On another note, every once in a while the charging handle will not let me pull the bolt back. It’s weird as if something is blocking the bolt. I need to pull the trigger or really smack the charging handle to get it to cycle. Anyone ever have this problem before?
Huh! Like the 1911’s they would issue on Submarines? Lol, I was on the USS L. Mendel Rivers and USS Olympia.
Wait a minute though, after taking the action is right again. I’m able to cycle the action even if the safety is on!
You can’t cycle the action with the safety on.
Sent from my iPhone using Tapatalk
Took the BUIS off so that I could do a 3x magnifier when I feel like shooting at longer distances. Just got this https://www.americandefensemanufacturing.com/view/product/892/ after reading that some people's receivers were getting damaged by the Parker Mountain Machine QD mount. True or not, whatever excuse to get something new I suppose. :D
(https://photos.smugmug.com/photos/i-23d8PRr/0/9ddbcbaf/O/i-23d8PRr.jpg)
(https://photos.smugmug.com/photos/i-wdjzLfQ/0/63f6988f/O/i-wdjzLfQ.jpg)
This is my recent double stamper.
A3-Tactical H&K grip
HB Industreis 5.3" K barrel with integrated Tri lug
HB Industries 6.84" slant cut guard
HB trigger spring
Shooters Element trigger
Omega 9k with Sico 3 lug mount (0 slop)
Cz Safety delete
Parker Mountain Machining left side safety
Vortex Spitfire 1x Prism scope
(https://i.ibb.co/N2xkmNh/no2.jpg)
After about a month my Form 1 came through. Now I think I'll be working on another Form 1 for a can. I'm really loving the ACR stock which I've been holding on to for a different project that never came to fruition. I really like the B&T Stock but not sure if I want to pay full price for it.\
I can't remember how excited I've been about a firearm! I don't usually run with a laser, but I tried it out for functionality and looks.
(https://i.imgur.com/MxMsWEt.jpg)
Nice gun I like the stock and the Magpul grip.
Nice gun I like the stock and the Magpul grip.
Thank you! I had an ACR stock on it before but really like the B&T.
Nice gun I like the stock and the Magpul grip.
Thank you! I had an ACR stock on it before but really like the B&T.
If you still have your ACR stock lying around ... I'm desperately looking for one to equip my scorpion ;D
How do you like the nano ? It looks awesome on your setup!
Got my OWL today, pretty sweet. A little chunkier than I expected but looks nice.What muzzle device is that? I'm looking to replace the faux suppressor on the micro as it looks like you have done.
(https://photos.smugmug.com/photos/i-6h6fG2v/0/cafb52b7/O/i-6h6fG2v.jpg)
(https://photos.smugmug.com/photos/i-h78GbqK/0/15358aa9/O/i-h78GbqK.jpg)
Got my OWL today, pretty sweet. A little chunkier than I expected but looks nice.What muzzle device is that? I'm looking to replace the faux suppressor on the micro as it looks like you have done.
Anyone running a midwest handguard with a zhukov stock?
Anyone running a midwest handguard with a zhukov stock?
I finally had a Scorpion stick around at the shop long enough for me to do something with it.Looks great! Hydro dip or cerakote? Cost?
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/4.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/4.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/6.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/6.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/7.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/7.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/12.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/12.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/13.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/13.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/10.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/10.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/2.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/2.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/11.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/11.high.jpg)
It's not proper for me to discuss prices here on the forum,that's a rules infraction. It is cerakote, you can contact at my shop by phone or email.
I finally had a Scorpion stick around at the shop long enough for me to do something with it.That is so cool! Very nice
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/4.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/4.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/6.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/6.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/7.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/7.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/12.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/12.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/13.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/13.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/10.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/10.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/2.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/2.high.jpg)
(http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/11.low.jpg) (http://www.eastonfirearmsrefinishing.com/Gallery/photo/466/11.high.jpg)
Here is my Scorpion (https://uploads.tapatalk-cdn.com/20191229/c025adaf12108552028aa0498a15b903.jpg)Have you tried it without the riser on that optic?
Sent from my SM-N960U using Tapatalk
Ha. No sir. I didnt even know it came off....but I will certainly take it off and try it out. Thanks for the heads up.Here is my Scorpion (https://uploads.tapatalk-cdn.com/20191229/c025adaf12108552028aa0498a15b903.jpg)Have you tried it without the riser on that optic?
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
Not a great pic....Super long range!
I’ll take more once I get it out in the desert to play.
(https://thumbs2.imgbox.com/80/c7/iAshdZqr_t.jpeg) (http://imgbox.com/iAshdZqr)
It?s a Haley Thorntail. That?s my Scorpion so if you have any other questions feel free to ask. I?ve been running that setup for some time. Some things I changed over time, but the light has stayed there because it?s the best spot for me.(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/55A0C71F-A725-4614-8516-407FDE2F260B.jpg)
(http://i4.photobucket.com/albums/y109/CanaryLupo/Shooting/4884195D-197A-4290-AFC4-C1726315A9FC.jpg)
Pretty much my final setup.... for now. :) What a difference the Yeti Wurx Everest grip makes. Love it.
I know this is really old, but , does anyone know what mount that is holding the light?
I'm trying to decide between a bottom mount or 45* mount. I have a hybrid on the end of my scorpion so, shadows come into play. I'm pretty sure 6 o'clock is going to be the best , but i want to try a 45. Both at different distances to get a true feel for the shadow effect.
(https://uploads.tapatalk-cdn.com/20190428/0f9ac0994e515cd5e707ea24903aefb6.jpg)
Here?s a pic from last week. As you can see I have kept it the same. The light in that position makes activating with my thumb easy and doesn?t create shadows.
My new Flash can and brace pistol. SBR paperwork sent in this morning. Waiting for my Octane 9 to get out of jail.You should of E-filed. It's like 3 week approvals. Paper route is painstakingly long..
(https://i.imgur.com/ePgXbfyl.jpg)
(https://i.imgur.com/aBgUghNl.jpg)
Just for a size comparison: photo with my Beretta CX4 9mm
(https://i.imgur.com/6klubqZl.jpg)
HD Scorpion finished!
- HBI Industries Micro Conversion
- ACR Folding Stock
- Dan Haga Designs ACR adapter
- Pakse Pathfinder grip
- Shooting Sight RPS 2 stage trigger with Shooter Element flat Trigger
- HBI Industries safety selectors
- A3 Tactical HK style VFG
- Surefire X300u (1k Lumen) with KDG Kinect QD picatinny mount
- Trijicon SRO with ADM QD mount
- HK tri-lug with SiCo Omega 9k(https://uploads.tapatalk-cdn.com/20200122/eea0ff730c82d915c3ed2f74d1f08aef.jpg)
Sent from my SM-N950U using Tapatalk
(https://uploads.tapatalk-cdn.com/20200329/ef2fc36bdb175b04eda3c3485aa50f65.jpg)How is the cheek weld on that stock/sight combination? Looks like you would have to bury your cheek pretty hard to look through them.
Sent from my iPhone using Tapatalk
great day, hope everyone is doing great. I can't seem to be able to attache photos on a post, I already tried manually thru the image icon [img][img] and putting url in between. I also do not have attachment options for photos on the attachment and other options drop down. Anyone kind enough to help me out? Thanks 8)
great day, hope everyone is doing great. I can't seem to be able to attache photos on a post, I already tried manually thru the image icon [img][img] and putting url in between. I also do not have attachment options for photos on the attachment and other options drop down. Anyone kind enough to help me out? Thanks 8)
Purchased a "like new" Scorpion and decided to upgrade it.
Before:
(https://i493.photobucket.com/albums/rr296/eggrollboy/Pew%20Pew/Old%20Scorpion.jpg) (https://s493.photobucket.com/user/eggrollboy/media/Pew%20Pew/Old%20Scorpion.jpg.html)
After:
(https://i493.photobucket.com/albums/rr296/eggrollboy/Pew%20Pew/New%20Scorpion.jpg) (https://s493.photobucket.com/user/eggrollboy/media/Pew%20Pew/New%20Scorpion.jpg.html)
Sights and a mini handstop will be next. Then maybe the trigger.
did you ever fire it with that grip you bought it with?
I was looking at getting something similar or just a finger/hand stop for mine
HD Scorpion finished!What a beauty! Is that absolute co witness or lower 1/3rd? SRO looks clean.
- HBI Industries Micro Conversion
- ACR Folding Stock
- Dan Haga Designs ACR adapter
- Pakse Pathfinder grip
- Shooting Sight RPS 2 stage trigger with Shooter Element flat Trigger
- HBI Industries safety selectors
- A3 Tactical HK style VFG
- Surefire X300u (1k Lumen) with KDG Kinect QD picatinny mount
- Trijicon SRO with ADM QD mount
- HK tri-lug with SiCo Omega 9k(https://uploads.tapatalk-cdn.com/20200122/eea0ff730c82d915c3ed2f74d1f08aef.jpg)
Sent from my SM-N950U using Tapatalk
Thanks man! It's one of my most fun guns to shoot. The SRO is just above the factory irons rendering them useless. The SRO just opens up FOV and I think fits this application and I've ran a few different RDS on it- I have the SRO on a qd ADM mount if that were to fail. The ACR stock makes the irons take a little more head tilt to acquire sight pic. The OEM stock with low mount RMR you can co- witness.HD Scorpion finished!What a beauty! Is that absolute co witness or lower 1/3rd? SRO looks clean.
- HBI Industries Micro Conversion
- ACR Folding Stock
- Dan Haga Designs ACR adapter
- Pakse Pathfinder grip
- Shooting Sight RPS 2 stage trigger with Shooter Element flat Trigger
- HBI Industries safety selectors
- A3 Tactical HK style VFG
- Surefire X300u (1k Lumen) with KDG Kinect QD picatinny mount
- Trijicon SRO with ADM QD mount
- HK tri-lug with SiCo Omega 9k(https://uploads.tapatalk-cdn.com/20200122/eea0ff730c82d915c3ed2f74d1f08aef.jpg)
Sent from my SM-N950U using Tapatalk
Sent from my iPhone using Tapatalk
(https://i.ibb.co/PcSYxp1/20200511-135706.jpg) (https://ibb.co/sKBPjSs)
Trijicon Reflex(https://i.ibb.co/PcSYxp1/20200511-135706.jpg) (https://ibb.co/sKBPjSs)
Nice! What optic is that ?
Nice! What optic is that ?Thanks! They are Trijicon Reflex's 1x24.
Very nice.
I’m jelly!
What can you tell us about the difference in shooting them with and without the riser under the optic?
Nice! What optic is that ?Thanks! They are Trijicon Reflex's 1x24.
Where did you find the gnome w/ dual scorpion's morale patch?! Pretty cool!
My new SBR with all the usual upgrades.
(https://uploads.tapatalk-cdn.com/20200620/6fba0c85e0d8af415e81c7e25ad4bd28.jpg)
Sent from my iPad using Tapatalk
Good god that's handsome. Is that a finish on it or just the lighting?
Good god that's handsome. Is that a finish on it or just the lighting?
Thanks! It’s the lighting. Used to do a lot of photography and I still like to play around with it from time to time.
(https://i.imgur.com/tTU6H55h.jpg)My favorite in this thread thus far. What optic is that?
(https://i.imgur.com/iVHASjoh.jpg)
Years of tweaking this two stamper.
(https://i.imgur.com/tTU6H55h.jpg)Is that some version of the innovative arms integrated setup? The handgaurd looks different.
(https://i.imgur.com/iVHASjoh.jpg)
Years of tweaking this two stamper.
My favorite in this thread thus far. What optic is that?
Is that some version of the innovative arms integrated setup? The handgaurd looks different.
I gotcha! Would love to see a head to head with that one and the manticore arms offering to see which handgaurd gets hotter, it looks like they are similar designs.Is that some version of the innovative arms integrated setup? The handgaurd looks different.
This is the Innovative Arms Integral with their new Heat Shield
https://shop.innovativearms.com/product/iasc9-heat-shield/
That looks really nice. It gave me sticker shock though.
My updated Scorpion
(https://live.staticflickr.com/65535/50075530376_d7d94362d6_c.jpg)
I had to take a shot at the balancing picture. Took a second, and not near as cool as a background, but it did work.
I had to take a shot at the balancing picture. Took a second, and not near as cool as a background, but it did work.
Nice! Scorpions seem to usually be leaning forward with their tails in the air, so it's only natural. ;)
Been awhile since I posted an updated pic of the Scorpion. Here's the latest.
Sent from my SAMSUNG-SM-G930A using Tapatalk
The regular grip is a Magpul, the vertical grip is an aluminum RailScales RSB.
Sent from my SAMSUNG-SM-G930A using Tapatalk
(https://lh3.googleusercontent.com/-v4-Cay-YJcw/XxnJMT1E7oI/AAAAAAAANY0/0_Uxbr9507ABTX9YiLgLD4m0gvR3MfgywCK8BGAsYHg/s512/2020-07-23.jpg)
"Magpul AFG2 hacked up to tuck it better " That is a very clever idea, is it still a solid mount?
Here's my Scorpion.
Magpul Grip
Magpul Mag release
Magpul Mags (147gr HSTs)
Magpul AFG2 hacked up to tuck it better
Dan Haga ACR adpater
Dan Haga Tailhook ACR adapter
FDE Tailhook mod 1
Coyote Brown ACR stock
CZ Customs Trigger pack/group
HBI Forward Theta trigger for the CZ trigger group
HBI left side safety
HBI Long AK safety right side
Olight ODIN (may swap back to a PL Pro)
Lion Gears 9 slot bridge mount, cantilever pic with .5" riser.
HAD suppressor cover (May ditch it for a Burn proof gear, it's overkill)
Rugged Obsidian .45 with 9mm caps and tri lug
Rugged Tri lug adapter
PMM QD mount
Holosun 510c Elite
Magpul MBUS pro
VTACS sling
Magpul 1st gen XTM pic cover.
Soo many shades of brown, lmfao! It's finally done though, no more mods. Maybe a paint job, idk.
(https://lh3.googleusercontent.com/-v4-Cay-YJcw/XxnJMT1E7oI/AAAAAAAANY0/0_Uxbr9507ABTX9YiLgLD4m0gvR3MfgywCK8BGAsYHg/s512/2020-07-23.jpg)
"Magpul AFG2 hacked up to tuck it better " That is a very clever idea, is it still a solid mount?
Here's my Scorpion.
Magpul Grip
Magpul Mag release
Magpul Mags (147gr HSTs)
Magpul AFG2 hacked up to tuck it better
Dan Haga ACR adpater
Dan Haga Tailhook ACR adapter
FDE Tailhook mod 1
Coyote Brown ACR stock
CZ Customs Trigger pack/group
HBI Forward Theta trigger for the CZ trigger group
HBI left side safety
HBI Long AK safety right side
Olight ODIN (may swap back to a PL Pro)
Lion Gears 9 slot bridge mount, cantilever pic with .5" riser.
HAD suppressor cover (May ditch it for a Burn proof gear, it's overkill)
Rugged Obsidian .45 with 9mm caps and tri lug
Rugged Tri lug adapter
PMM QD mount
Holosun 510c Elite
Magpul MBUS pro
VTACS sling
Magpul 1st gen XTM pic cover.
Soo many shades of brown, lmfao! It's finally done though, no more mods. Maybe a paint job, idk.
- HB Industries 11.25" Flat Handguard
- Strike Industries Link Curved Foregrip
- In Lead We Trust HK Style Extended 3-Lug Adapter
- In Lead We Trust 3-Lug Flash Cone 3 3/4" 1.5" OD
- Missouri Tactical Picatinny Rail Covers
- HB Industries ProStock Charging Handle
- HB Industries AK Style Right Safety Selector
- HB Industries Mini AK Style Left Safety Selector
- Manticore Arms CZPDW collapsible brace
- HB Industries Reduced Weight Trigger Spring Kit
- Shooters Element trigger pack polish
- HB Industries DELTA Trigger (Red)
- HB Industries Duckbill Mag Release Lever
- YetiWurks Grip
- Holosun HE510C-GR
- Magpul M-LOK Offset Light/Optic Picatinny Rail Mount for inforce WML
- Cerakote Tungsten H-237
(https://i1.lensdump.com/i/0AAQ4A.jpg)
RATWORX!
There are a few issues left to correct. The muzzle devices need sorted out once I can dedicate a suppressor and the CZC adapter is 2"s longer when compared to the HBI setup. I don't mind the extra length but it's pretty long for most people and would look better with the HBI Zhukov adapter.
(https://imagizer.imageshack.com/v2/800x600q90/924/VHwg6F.jpg) (https://imageshack.com/i/poVHwg6Fj)
Can you tell me what stock set up is that, or is it a brace?
Sexy. Love the grey.
Ended up with the IA-SC9.
:)
How did you mount your Olight Baldr Pro at an offset like that?
(https://i.imgur.com/VSvESGS.jpg)
(https://i.imgur.com/VSvESGS.jpg)
13Foxtrot, of course I love the “Green” lol.. nice to see another 13 Series.. I’m a FNG too around here
What is in that cz box thing? I did not receive one of those
What is in that cz box thing? I did not receive one of those
Assuming you mean the black pouch with 'CZ' on it, it's a cleaning kit. Pretty similar to the kind of thing Otis makes. It's handy to have, but you can just as easily throw something just like it together.
(https://images.gunsinternational.com/listings_sub/acc_116067/gi_101541617/New-CZ-Scorpion-EVO3-9mm-2-20-rounds-magazines-lock-cleaning-kit-in-zipped-pouch-new-in-the-box_101541617_116067_100B60FCC4DB7E00.jpg) (https://images.gunsinternational.com/listings_sub/acc_116067/gi_101541617/New-CZ-Scorpion-EVO3-9mm-2-20-rounds-magazines-lock-cleaning-kit-in-zipped-pouch-new-in-the-box_101541617_116067_100B60FCC4DB7E00.jpg)
Which pistol grip is that one?
Thanks! That looks really nice so I ordered me oneWhich pistol grip is that one?
That's the 'Switchback' grip from Yeti Wurks.
https://www.yetiwurks.com/product/yeti-wurks-switchback-grip/
Thanks! That looks really nice so I ordered me one
That’s exactly where I’m at, I prefer the factory grip to the Apex one after some testing, and will be selling the Apex oneThanks! That looks really nice so I ordered me one
Nice. I used to have the Apex grip, and I like the Switchback better. With the interchangeable backstraps and more of a curve, it feels more like a CZ 75 grip, imo.
3Xternal, that is a work of art, I love it.
Here's mine with the www.ozarkfab.com (http://www.ozarkfab.com) Definitely Angled Foregrip :D
(https://i.imgur.com/RdOr1rrm.jpg)(https://i.imgur.com/bPctumjm.jpg)(https://i.imgur.com/bPPkH8hm.jpg)